f5networks.f5_modules.bigip_snat_translation module – Manage SNAT translations on a BIG-IP

Note

This module is part of the f5networks.f5_modules collection (version 1.21.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_snat_translation.

New in f5networks.f5_modules 1.0.0

Synopsis

  • Manage SNAT translations on a BIG-IP system.

Parameters

Parameter

Comments

address

aliases: ip

string

Specifies the IP address of the SNAT translation. When state is present, enabled, or disabled, this parameter is required.

This parameter cannot be updated after it is set.

arp

boolean

If yes, specifies the NAT sends ARP requests.

Choices:

  • false

  • true

connection_limit

integer

Specifies a limit on the number of connections a translation address must reach before it no longer initiates a connection. The default value of 0 indicates the setting is disabled.

The accepted value range is 0 - 65535.

description

string

Description of snat-translation. none or '' sets a default description of null.

ip_idle_timeout

string

Specifies the amount of time connections to an IP address initiated using a SNAT address are allowed to remain idle before being automatically disconnected. indefinite prevents the connection from timing out.

The accepted value range is 0 - 4294967295 seconds. Specifying indefinite sets it to the maximum value.

name

string / required

The name of SNAT translation.

partition

string

Device partition to manage resources on.

Required with state absent when a partition other than Common is used.

provider

dictionary

added in f5networks.f5_modules 1.0.0

A dict object containing connection details.

auth_provider

string

Configures the auth provider for to obtain authentication tokens from the remote device.

This option is really used when working with BIG-IQ devices.

no_f5_teem

boolean

If yes, TEEM telemetry data is not sent to F5.

You may omit this option by setting the environment variable F5_TELEMETRY_OFF.

Previously used variable F5_TEEM is deprecated as its name was confusing.

Choices:

  • false ← (default)

  • true

password

aliases: pass, pwd

string / required

The password for the user account used to connect to the BIG-IP.

You may omit this option by setting the environment variable F5_PASSWORD.

server

string / required

The BIG-IP host.

You may omit this option by setting the environment variable F5_SERVER.

server_port

integer

The BIG-IP server port.

You may omit this option by setting the environment variable F5_SERVER_PORT.

Default: 443

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

string

Configures the transport connection to use when connecting to the remote device.

Choices:

  • "rest" ← (default)

user

string / required

The username to connect to the BIG-IP with. This user must have administrative privileges on the device.

You may omit this option by setting the environment variable F5_USER.

validate_certs

boolean

If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.

You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Choices:

  • false

  • true ← (default)

state

string

The SNAT translation state. If absent, deletes the SNAT translation if it exists. present creates the SNAT translation and enables it. If enabled, enables the SNAT translation if it exists. If disabled, creates the SNAT translation if needed, and sets the state to disabled.

Choices:

  • "present" ← (default)

  • "absent"

  • "enabled"

  • "disabled"

tcp_idle_timeout

string

Specifies the amount of time that TCP connections initiated using a SNAT address are allowed to remain idle before being automatically disconnected. indefinite prevents the connection from timing out.

The accepted value range is 0 - 4294967295 seconds. Specifying indefinite sets it to the maximum value.

traffic_group

string

The traffic group for the snat-translation address. When creating a new address, if this value is not specified, the default is /Common/traffic-group-1.

udp_idle_timeout

string

Specifies the amount of time UDP connections initiated using a SNAT address are allowed to remain idle before being automatically disconnected. indefinite prevents the connection from timing out.

The accepted value range is 0 - 4294967295 seconds. Specifying indefinite sets it to the maximum value.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

  • Requires BIG-IP software version >= 12.

  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a SNAT translation 'my-snat-translation'
  bigip_snat_translation:
    name: my-snat-pool
    state: present
    address: 10.10.10.10
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Modify a SNAT translation 'my-snat-translation'
  bigip_snat_translation:
    name: my-snat-pool
    state: present
    address: 10.10.10.10
    arp: no
    connection_limit: 300
    ip_idle_timeout: 1800
    tcp_idle_timeout: 1800
    udp_idle_timeout: 1800
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Disable a SNAT translation 'my-snat-translation'
  bigip_snat_translation:
    name: my-snat-pool
    state: disabled
    address: 10.10.10.10
    arp: no
    connection_limit: 300
    ip_idle_timeout: 1800
    tcp_idle_timeout: 1800
    udp_idle_timeout: 1800
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Enable a SNAT translation 'my-snat-translation'
  bigip_snat_translation:
    name: my-snat-pool
    state: enabled
    address: 10.10.10.10
    arp: no
    connection_limit: 300
    ip_idle_timeout: 1800
    tcp_idle_timeout: 1800
    udp_idle_timeout: 1800
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Create using partition other then /Common on a SNAT translation 'my-new-snat-translation'
  bigip_snat_translation:
    name: my-new-snat-pool
    state: enabled
    address: 10.10.10.10
    arp: no
    connection_limit: 300
    ip_idle_timeout: 1800
    partition: ansible
    tcp_idle_timeout: 1800
    udp_idle_timeout: 1800
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Modify using traffic group other then /Common/traffic-group-1 on a SNAT translation 'my-new-snat-translation'
  bigip_snat_translation:
    name: my-new-snat-pool
    state: enabled
    address: 10.10.10.10
    arp: no
    connection_limit: 300
    ip_idle_timeout: 1800
    partition: ansible
    tcp_idle_timeout: 1800
    traffic_group: /Common/ansible
    udp_idle_timeout: 1800
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

address

string

IP address used for SNAT translation.

Returned: changed and success

Sample: "10.10.10.10"

arp

boolean

Whether snat-translation sends arp requests.

Returned: changed

Sample: true

connection_limit

integer

The new connection limit of the virtual address.

Returned: changed

Sample: 1000

description

string

Description of the snat-translation.

Returned: changed

Sample: "My snat-translation"

ip_idle_timeout

string

IP idle timeout value for the snat-translation.

Returned: changed

Sample: "300"

state

string

The new state of the snat-translation.

Returned: changed

Sample: "disabled"

tcp_idle_timeout

string

TCP idle timeout value for the snat-translation.

Returned: changed

Sample: "1800"

traffic_group

string

Assigned traffic group.

Returned: changed

Sample: "/Common/traffic-group-1"

udp_idle_timeout

string

UDP idle timeout value for the snat-translation.

Returned: changed

Sample: "indefinite"

Authors

  • Greg Crosby (@crosbygw)

  • Wojciech Wypior (@wojtek0806)