fortinet.fortios.fortios_firewall_central_snat_map module – Configure IPv4 and IPv6 central SNAT policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_central_snat_map.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and central_snat_map category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

action

string

the action indiactor to move an object in the list

Choices:

  • "move"

after

string

mkey of target identifier

before

string

mkey of target identifier

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

firewall_central_snat_map

dictionary

Configure IPv4 and IPv6 central SNAT policies.

comments

string

Comment.

dst_addr

list / elements=dictionary

IPv4 Destination address.

name

string

Address name. Source firewall.address.name firewall.addrgrp.name.

dst_addr6

list / elements=dictionary

IPv6 Destination address.

name

string

Address name. Source firewall.address6.name firewall.addrgrp6.name.

dstintf

list / elements=dictionary

Destination interface name from available interfaces.

name

string

Interface name. Source system.interface.name system.zone.name.

nat

string

Enable/disable source NAT.

Choices:

  • "disable"

  • "enable"

nat46

string

Enable/disable NAT46.

Choices:

  • "enable"

  • "disable"

nat64

string

Enable/disable NAT64.

Choices:

  • "enable"

  • "disable"

nat_ippool

list / elements=dictionary

Name of the IP pools to be used to translate addresses from available IP Pools.

name

string

IP pool name. Source firewall.ippool.name.

nat_ippool6

list / elements=dictionary

IPv6 pools to be used for source NAT.

name

string

IPv6 pool name. Source firewall.ippool6.name.

nat_port

string

Translated port or port range (1 to 65535, 0 means any port).

orig_addr

list / elements=dictionary

IPv4 Original address.

name

string

Address name. Source firewall.address.name firewall.addrgrp.name.

orig_addr6

list / elements=dictionary

IPv6 Original address.

name

string

Address name. Source firewall.address6.name firewall.addrgrp6.name.

orig_port

string

Original TCP port (1 to 65535, 0 means any port).

policyid

integer / required

Policy ID.

protocol

integer

Integer value for the protocol type (0 - 255).

srcintf

list / elements=dictionary

Source interface name from available interfaces.

name

string

Interface name. Source system.interface.name system.zone.name.

status

string

Enable/disable the active status of this policy.

Choices:

  • "enable"

  • "disable"

type

string

IPv4/IPv6 source NAT.

Choices:

  • "ipv4"

  • "ipv6"

uuid

string

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

self

string

mkey of self identifier

state

string

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

  • Adjust object order by moving self after(before) another.

  • Only one of [after, before] must be specified when action is moving an object.

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv4 and IPv6 central SNAT policies.
    fortios_firewall_central_snat_map:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_central_snat_map:
        comments: "<your_own_value>"
        dst_addr:
         -
            name: "default_name_5 (source firewall.address.name firewall.addrgrp.name)"
        dst_addr6:
         -
            name: "default_name_7 (source firewall.address6.name firewall.addrgrp6.name)"
        dstintf:
         -
            name: "default_name_9 (source system.interface.name system.zone.name)"
        nat: "disable"
        nat_ippool:
         -
            name: "default_name_12 (source firewall.ippool.name)"
        nat_ippool6:
         -
            name: "default_name_14 (source firewall.ippool6.name)"
        nat_port: "<your_own_value>"
        nat46: "enable"
        nat64: "enable"
        orig_addr:
         -
            name: "default_name_19 (source firewall.address.name firewall.addrgrp.name)"
        orig_addr6:
         -
            name: "default_name_21 (source firewall.address6.name firewall.addrgrp6.name)"
        orig_port: "<your_own_value>"
        policyid: "0"
        protocol: "0"
        srcintf:
         -
            name: "default_name_26 (source system.interface.name system.zone.name)"
        status: "enable"
        type: "ipv4"
        uuid: "<your_own_value>"

  - name: move firewall.central_snat_map
    fortios_firewall_central_snat_map:
      vdom:  "root"
      action: "move"
      self: "<mkey of self identifier>"
      after: "<mkey of target identifier>"
     #before: "<mkey of target identifier>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)