fortinet.fortios.fortios_router_bgp module – Configure BGP in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_router_bgp.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and bgp category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

router_bgp

dictionary

Configure BGP.

additional_path

string

Enable/disable selection of BGP IPv4 additional paths.

Choices:

  • "enable"

  • "disable"

additional_path6

string

Enable/disable selection of BGP IPv6 additional paths.

Choices:

  • "enable"

  • "disable"

additional_path_select

integer

Number of additional paths to be selected for each IPv4 NLRI.

additional_path_select6

integer

Number of additional paths to be selected for each IPv6 NLRI.

additional_path_select_vpnv4

integer

Number of additional paths to be selected for each VPNv4 NLRI.

additional_path_vpnv4

string

Enable/disable selection of BGP VPNv4 additional paths.

Choices:

  • "enable"

  • "disable"

admin_distance

list / elements=dictionary

Administrative distance modifications.

distance

integer

Administrative distance to apply (1 - 255).

id

integer

ID.

neighbour_prefix

string

Neighbor address prefix.

route_list

string

Access list of routes to apply new distance to. Source router.access-list.name.

aggregate_address

list / elements=dictionary

BGP aggregate address table.

as_set

string

Enable/disable generate AS set path information.

Choices:

  • "enable"

  • "disable"

id

integer

ID.

prefix

string

Aggregate prefix.

summary_only

string

Enable/disable filter more specific routes from updates.

Choices:

  • "enable"

  • "disable"

aggregate_address6

list / elements=dictionary

BGP IPv6 aggregate address table.

as_set

string

Enable/disable generate AS set path information.

Choices:

  • "enable"

  • "disable"

id

integer

ID.

prefix6

string

Aggregate IPv6 prefix.

summary_only

string

Enable/disable filter more specific routes from updates.

Choices:

  • "enable"

  • "disable"

always_compare_med

string

Enable/disable always compare MED.

Choices:

  • "enable"

  • "disable"

as

string

Router AS number, asplain/asdot/asdot+ format, 0 to disable BGP.

bestpath_as_path_ignore

string

Enable/disable ignore AS path.

Choices:

  • "enable"

  • "disable"

bestpath_cmp_confed_aspath

string

Enable/disable compare federation AS path length.

Choices:

  • "enable"

  • "disable"

bestpath_cmp_routerid

string

Enable/disable compare router ID for identical EBGP paths.

Choices:

  • "enable"

  • "disable"

bestpath_med_confed

string

Enable/disable compare MED among confederation paths.

Choices:

  • "enable"

  • "disable"

bestpath_med_missing_as_worst

string

Enable/disable treat missing MED as least preferred.

Choices:

  • "enable"

  • "disable"

client_to_client_reflection

string

Enable/disable client-to-client route reflection.

Choices:

  • "enable"

  • "disable"

cluster_id

string

Route reflector cluster ID.

confederation_identifier

integer

Confederation identifier.

confederation_peers

list / elements=dictionary

Confederation peers.

peer

string

Peer ID.

dampening

string

Enable/disable route-flap dampening.

Choices:

  • "enable"

  • "disable"

dampening_max_suppress_time

integer

Maximum minutes a route can be suppressed.

dampening_reachability_half_life

integer

Reachability half-life time for penalty (min).

dampening_reuse

integer

Threshold to reuse routes.

dampening_route_map

string

Criteria for dampening. Source router.route-map.name.

dampening_suppress

integer

Threshold to suppress routes.

dampening_unreachability_half_life

integer

Unreachability half-life time for penalty (min).

default_local_preference

integer

Default local preference.

deterministic_med

string

Enable/disable enforce deterministic comparison of MED.

Choices:

  • "enable"

  • "disable"

distance_external

integer

Distance for routes external to the AS.

distance_internal

integer

Distance for routes internal to the AS.

distance_local

integer

Distance for routes local to the AS.

ebgp_multipath

string

Enable/disable EBGP multi-path.

Choices:

  • "enable"

  • "disable"

enforce_first_as

string

Enable/disable enforce first AS for EBGP routes.

Choices:

  • "enable"

  • "disable"

fast_external_failover

string

Enable/disable reset peer BGP session if link goes down.

Choices:

  • "enable"

  • "disable"

graceful_end_on_timer

string

Enable/disable to exit graceful restart on timer only.

Choices:

  • "enable"

  • "disable"

graceful_restart

string

Enable/disable BGP graceful restart capabilities.

Choices:

  • "enable"

  • "disable"

graceful_restart_time

integer

Time needed for neighbors to restart (sec).

graceful_stalepath_time

integer

Time to hold stale paths of restarting neighbor (sec).

graceful_update_delay

integer

Route advertisement/selection delay after restart (sec).

holdtime_timer

integer

Number of seconds to mark peer as dead.

ibgp_multipath

string

Enable/disable IBGP multi-path.

Choices:

  • "enable"

  • "disable"

ignore_optional_capability

string

Do not send unknown optional capability notification message.

Choices:

  • "enable"

  • "disable"

keepalive_timer

integer

Frequency to send keep alive requests.

log_neighbour_changes

string

Log BGP neighbor changes.

Choices:

  • "enable"

  • "disable"

multipath_recursive_distance

string

Enable/disable use of recursive distance to select multipath.

Choices:

  • "enable"

  • "disable"

neighbor

list / elements=dictionary

BGP neighbor table.

activate

string

Enable/disable address family IPv4 for this neighbor.

Choices:

  • "enable"

  • "disable"

activate6

string

Enable/disable address family IPv6 for this neighbor.

Choices:

  • "enable"

  • "disable"

activate_vpnv4

string

Enable/disable address family VPNv4 for this neighbor.

Choices:

  • "enable"

  • "disable"

additional_path

string

Enable/disable IPv4 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

additional_path6

string

Enable/disable IPv6 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

additional_path_vpnv4

string

Enable/disable VPNv4 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

adv_additional_path

integer

Number of IPv4 additional paths that can be advertised to this neighbor.

adv_additional_path6

integer

Number of IPv6 additional paths that can be advertised to this neighbor.

adv_additional_path_vpnv4

integer

Number of VPNv4 additional paths that can be advertised to this neighbor.

advertisement_interval

integer

Minimum interval (sec) between sending updates.

allowas_in

integer

IPv4 The maximum number of occurrence of my AS number allowed.

allowas_in6

integer

IPv6 The maximum number of occurrence of my AS number allowed.

allowas_in_enable

string

Enable/disable IPv4 Enable to allow my AS in AS path.

Choices:

  • "enable"

  • "disable"

allowas_in_enable6

string

Enable/disable IPv6 Enable to allow my AS in AS path.

Choices:

  • "enable"

  • "disable"

allowas_in_vpnv4

integer

The maximum number of occurrence of my AS number allowed for VPNv4 route.

as_override

string

Enable/disable replace peer AS with own AS for IPv4.

Choices:

  • "enable"

  • "disable"

as_override6

string

Enable/disable replace peer AS with own AS for IPv6.

Choices:

  • "enable"

  • "disable"

attribute_unchanged

list / elements=string

IPv4 List of attributes that should be unchanged.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

attribute_unchanged6

list / elements=string

IPv6 List of attributes that should be unchanged.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

attribute_unchanged_vpnv4

list / elements=string

List of attributes that should be unchanged for VPNv4 route.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

bfd

string

Enable/disable BFD for this neighbor.

Choices:

  • "enable"

  • "disable"

capability_default_originate

string

Enable/disable advertise default IPv4 route to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_default_originate6

string

Enable/disable advertise default IPv6 route to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_dynamic

string

Enable/disable advertise dynamic capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart

string

Enable/disable advertise IPv4 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart6

string

Enable/disable advertise IPv6 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart_vpnv4

string

Enable/disable advertise VPNv4 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_orf

string

Accept/Send IPv4 ORF lists to/from this neighbor.

Choices:

  • "none"

  • "receive"

  • "send"

  • "both"

capability_orf6

string

Accept/Send IPv6 ORF lists to/from this neighbor.

Choices:

  • "none"

  • "receive"

  • "send"

  • "both"

capability_route_refresh

string

Enable/disable advertise route refresh capability to this neighbor.

Choices:

  • "enable"

  • "disable"

conditional_advertise

list / elements=dictionary

Conditional advertisement.

advertise_routemap

string

Name of advertising route map. Source router.route-map.name.

condition_routemap

list / elements=dictionary

List of conditional route maps. Source router.route-map.name.

name

string

route map Source router.route-map.name.

condition_type

string

Type of condition.

Choices:

  • "exist"

  • "non-exist"

conditional_advertise6

list / elements=dictionary

IPv6 conditional advertisement.

advertise_routemap

string

Name of advertising route map. Source router.route-map.name.

condition_routemap

list / elements=dictionary

List of conditional route maps. Source router.route-map.name.

name

string

route map Source router.route-map.name.

condition_type

string

Type of condition.

Choices:

  • "exist"

  • "non-exist"

connect_timer

integer

Interval (sec) for connect timer.

default_originate_routemap

string

Route map to specify criteria to originate IPv4 default. Source router.route-map.name.

default_originate_routemap6

string

Route map to specify criteria to originate IPv6 default. Source router.route-map.name.

description

string

Description.

distribute_list_in

string

Filter for IPv4 updates from this neighbor. Source router.access-list.name.

distribute_list_in6

string

Filter for IPv6 updates from this neighbor. Source router.access-list6.name.

distribute_list_in_vpnv4

string

Filter for VPNv4 updates from this neighbor. Source router.access-list.name.

distribute_list_out

string

Filter for IPv4 updates to this neighbor. Source router.access-list.name.

distribute_list_out6

string

Filter for IPv6 updates to this neighbor. Source router.access-list6.name.

distribute_list_out_vpnv4

string

Filter for VPNv4 updates to this neighbor. Source router.access-list.name.

dont_capability_negotiate

string

Do not negotiate capabilities with this neighbor.

Choices:

  • "enable"

  • "disable"

ebgp_enforce_multihop

string

Enable/disable allow multi-hop EBGP neighbors.

Choices:

  • "enable"

  • "disable"

ebgp_multihop_ttl

integer

EBGP multihop TTL for this peer.

filter_list_in

string

BGP filter for IPv4 inbound routes. Source router.aspath-list.name.

filter_list_in6

string

BGP filter for IPv6 inbound routes. Source router.aspath-list.name.

filter_list_out

string

BGP filter for IPv4 outbound routes. Source router.aspath-list.name.

filter_list_out6

string

BGP filter for IPv6 outbound routes. Source router.aspath-list.name.

holdtime_timer

integer

Interval (sec) before peer considered dead.

interface

string

Specify outgoing interface for peer connection. For IPv6 peer, the interface should have link-local address. Source system .interface.name.

ip

string

IP/IPv6 address of neighbor.

keep_alive_timer

integer

Keep alive timer interval (sec).

string

Enable/disable failover upon link down.

Choices:

  • "enable"

  • "disable"

local_as

string

Local AS number of neighbor.

local_as_no_prepend

string

Do not prepend local-as to incoming updates.

Choices:

  • "enable"

  • "disable"

local_as_replace_as

string

Replace real AS with local-as in outgoing updates.

Choices:

  • "enable"

  • "disable"

maximum_prefix

integer

Maximum number of IPv4 prefixes to accept from this peer.

maximum_prefix6

integer

Maximum number of IPv6 prefixes to accept from this peer.

maximum_prefix_threshold

integer

Maximum IPv4 prefix threshold value (1 - 100 percent).

maximum_prefix_threshold6

integer

Maximum IPv6 prefix threshold value (1 - 100 percent).

maximum_prefix_threshold_vpnv4

integer

Maximum VPNv4 prefix threshold value (1 - 100 percent).

maximum_prefix_vpnv4

integer

Maximum number of VPNv4 prefixes to accept from this peer.

maximum_prefix_warning_only

string

Enable/disable IPv4 Only give warning message when limit is exceeded.

Choices:

  • "enable"

  • "disable"

maximum_prefix_warning_only6

string

Enable/disable IPv6 Only give warning message when limit is exceeded.

Choices:

  • "enable"

  • "disable"

maximum_prefix_warning_only_vpnv4

string

Enable/disable only giving warning message when limit is exceeded for VPNv4 routes.

Choices:

  • "enable"

  • "disable"

next_hop_self

string

Enable/disable IPv4 next-hop calculation for this neighbor.

Choices:

  • "enable"

  • "disable"

next_hop_self6

string

Enable/disable IPv6 next-hop calculation for this neighbor.

Choices:

  • "enable"

  • "disable"

next_hop_self_rr

string

Enable/disable setting nexthop”s address to interface”s IPv4 address for route-reflector routes.

Choices:

  • "enable"

  • "disable"

next_hop_self_rr6

string

Enable/disable setting nexthop”s address to interface”s IPv6 address for route-reflector routes.

Choices:

  • "enable"

  • "disable"

next_hop_self_vpnv4

string

Enable/disable setting VPNv4 next-hop to interface”s IP address for this neighbor.

Choices:

  • "enable"

  • "disable"

override_capability

string

Enable/disable override result of capability negotiation.

Choices:

  • "enable"

  • "disable"

passive

string

Enable/disable sending of open messages to this neighbor.

Choices:

  • "enable"

  • "disable"

password

string

Password used in MD5 authentication.

prefix_list_in

string

IPv4 Inbound filter for updates from this neighbor. Source router.prefix-list.name.

prefix_list_in6

string

IPv6 Inbound filter for updates from this neighbor. Source router.prefix-list6.name.

prefix_list_in_vpnv4

string

Inbound filter for VPNv4 updates from this neighbor. Source router.prefix-list.name.

prefix_list_out

string

IPv4 Outbound filter for updates to this neighbor. Source router.prefix-list.name.

prefix_list_out6

string

IPv6 Outbound filter for updates to this neighbor. Source router.prefix-list6.name.

prefix_list_out_vpnv4

string

Outbound filter for VPNv4 updates to this neighbor. Source router.prefix-list.name.

remote_as

string

AS number of neighbor.

remove_private_as

string

Enable/disable remove private AS number from IPv4 outbound updates.

Choices:

  • "enable"

  • "disable"

remove_private_as6

string

Enable/disable remove private AS number from IPv6 outbound updates.

Choices:

  • "enable"

  • "disable"

remove_private_as_vpnv4

string

Enable/disable remove private AS number from VPNv4 outbound updates.

Choices:

  • "enable"

  • "disable"

restart_time

integer

Graceful restart delay time (sec, 0 = global default).

retain_stale_time

integer

Time to retain stale routes.

route_map_in

string

IPv4 Inbound route map filter. Source router.route-map.name.

route_map_in6

string

IPv6 Inbound route map filter. Source router.route-map.name.

route_map_in_vpnv4

string

VPNv4 inbound route map filter. Source router.route-map.name.

route_map_out

string

IPv4 outbound route map filter. Source router.route-map.name.

route_map_out6

string

IPv6 Outbound route map filter. Source router.route-map.name.

route_map_out6_preferable

string

IPv6 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_map_out_preferable

string

IPv4 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_map_out_vpnv4

string

VPNv4 outbound route map filter. Source router.route-map.name.

route_map_out_vpnv4_preferable

string

VPNv4 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_reflector_client

string

Enable/disable IPv4 AS route reflector client.

Choices:

  • "enable"

  • "disable"

route_reflector_client6

string

Enable/disable IPv6 AS route reflector client.

Choices:

  • "enable"

  • "disable"

route_reflector_client_vpnv4

string

Enable/disable VPNv4 AS route reflector client for this neighbor.

Choices:

  • "enable"

  • "disable"

route_server_client

string

Enable/disable IPv4 AS route server client.

Choices:

  • "enable"

  • "disable"

route_server_client6

string

Enable/disable IPv6 AS route server client.

Choices:

  • "enable"

  • "disable"

route_server_client_vpnv4

string

Enable/disable VPNv4 AS route server client for this neighbor.

Choices:

  • "enable"

  • "disable"

send_community

string

IPv4 Send community attribute to neighbor.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

send_community6

string

IPv6 Send community attribute to neighbor.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

send_community_vpnv4

string

Send community attribute to neighbor for VPNv4 address family.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

shutdown

string

Enable/disable shutdown this neighbor.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration

string

Enable/disable allow IPv4 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration6

string

Enable/disable allow IPv6 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration_vpnv4

string

Enable/disable allow VPNv4 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

stale_route

string

Enable/disable stale route after neighbor down.

Choices:

  • "enable"

  • "disable"

strict_capability_match

string

Enable/disable strict capability matching.

Choices:

  • "enable"

  • "disable"

unsuppress_map

string

IPv4 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.

unsuppress_map6

string

IPv6 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.

update_source

string

Interface to use as source IP/IPv6 address of TCP connections. Source system.interface.name.

weight

integer

Neighbor weight.

neighbor_group

list / elements=dictionary

BGP neighbor group table.

activate

string

Enable/disable address family IPv4 for this neighbor.

Choices:

  • "enable"

  • "disable"

activate6

string

Enable/disable address family IPv6 for this neighbor.

Choices:

  • "enable"

  • "disable"

activate_vpnv4

string

Enable/disable address family VPNv4 for this neighbor.

Choices:

  • "enable"

  • "disable"

additional_path

string

Enable/disable IPv4 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

additional_path6

string

Enable/disable IPv6 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

additional_path_vpnv4

string

Enable/disable VPNv4 additional-path capability.

Choices:

  • "send"

  • "receive"

  • "both"

  • "disable"

adv_additional_path

integer

Number of IPv4 additional paths that can be advertised to this neighbor.

adv_additional_path6

integer

Number of IPv6 additional paths that can be advertised to this neighbor.

adv_additional_path_vpnv4

integer

Number of VPNv4 additional paths that can be advertised to this neighbor.

advertisement_interval

integer

Minimum interval (sec) between sending updates.

allowas_in

integer

IPv4 The maximum number of occurrence of my AS number allowed.

allowas_in6

integer

IPv6 The maximum number of occurrence of my AS number allowed.

allowas_in_enable

string

Enable/disable IPv4 Enable to allow my AS in AS path.

Choices:

  • "enable"

  • "disable"

allowas_in_enable6

string

Enable/disable IPv6 Enable to allow my AS in AS path.

Choices:

  • "enable"

  • "disable"

allowas_in_vpnv4

integer

The maximum number of occurrence of my AS number allowed for VPNv4 route.

as_override

string

Enable/disable replace peer AS with own AS for IPv4.

Choices:

  • "enable"

  • "disable"

as_override6

string

Enable/disable replace peer AS with own AS for IPv6.

Choices:

  • "enable"

  • "disable"

attribute_unchanged

list / elements=string

IPv4 List of attributes that should be unchanged.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

attribute_unchanged6

list / elements=string

IPv6 List of attributes that should be unchanged.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

attribute_unchanged_vpnv4

list / elements=string

List of attributes that should be unchanged for VPNv4 route.

Choices:

  • "as-path"

  • "med"

  • "next-hop"

bfd

string

Enable/disable BFD for this neighbor.

Choices:

  • "enable"

  • "disable"

capability_default_originate

string

Enable/disable advertise default IPv4 route to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_default_originate6

string

Enable/disable advertise default IPv6 route to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_dynamic

string

Enable/disable advertise dynamic capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart

string

Enable/disable advertise IPv4 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart6

string

Enable/disable advertise IPv6 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_graceful_restart_vpnv4

string

Enable/disable advertise VPNv4 graceful restart capability to this neighbor.

Choices:

  • "enable"

  • "disable"

capability_orf

string

Accept/Send IPv4 ORF lists to/from this neighbor.

Choices:

  • "none"

  • "receive"

  • "send"

  • "both"

capability_orf6

string

Accept/Send IPv6 ORF lists to/from this neighbor.

Choices:

  • "none"

  • "receive"

  • "send"

  • "both"

capability_route_refresh

string

Enable/disable advertise route refresh capability to this neighbor.

Choices:

  • "enable"

  • "disable"

connect_timer

integer

Interval (sec) for connect timer.

default_originate_routemap

string

Route map to specify criteria to originate IPv4 default. Source router.route-map.name.

default_originate_routemap6

string

Route map to specify criteria to originate IPv6 default. Source router.route-map.name.

description

string

Description.

distribute_list_in

string

Filter for IPv4 updates from this neighbor. Source router.access-list.name.

distribute_list_in6

string

Filter for IPv6 updates from this neighbor. Source router.access-list6.name.

distribute_list_in_vpnv4

string

Filter for VPNv4 updates from this neighbor. Source router.access-list.name.

distribute_list_out

string

Filter for IPv4 updates to this neighbor. Source router.access-list.name.

distribute_list_out6

string

Filter for IPv6 updates to this neighbor. Source router.access-list6.name.

distribute_list_out_vpnv4

string

Filter for VPNv4 updates to this neighbor. Source router.access-list.name.

dont_capability_negotiate

string

Do not negotiate capabilities with this neighbor.

Choices:

  • "enable"

  • "disable"

ebgp_enforce_multihop

string

Enable/disable allow multi-hop EBGP neighbors.

Choices:

  • "enable"

  • "disable"

ebgp_multihop_ttl

integer

EBGP multihop TTL for this peer.

filter_list_in

string

BGP filter for IPv4 inbound routes. Source router.aspath-list.name.

filter_list_in6

string

BGP filter for IPv6 inbound routes. Source router.aspath-list.name.

filter_list_out

string

BGP filter for IPv4 outbound routes. Source router.aspath-list.name.

filter_list_out6

string

BGP filter for IPv6 outbound routes. Source router.aspath-list.name.

holdtime_timer

integer

Interval (sec) before peer considered dead.

interface

string

Specify outgoing interface for peer connection. For IPv6 peer, the interface should have link-local address. Source system .interface.name.

keep_alive_timer

integer

Keep alive timer interval (sec).

string

Enable/disable failover upon link down.

Choices:

  • "enable"

  • "disable"

local_as

string

Local AS number of neighbor.

local_as_no_prepend

string

Do not prepend local-as to incoming updates.

Choices:

  • "enable"

  • "disable"

local_as_replace_as

string

Replace real AS with local-as in outgoing updates.

Choices:

  • "enable"

  • "disable"

maximum_prefix

integer

Maximum number of IPv4 prefixes to accept from this peer.

maximum_prefix6

integer

Maximum number of IPv6 prefixes to accept from this peer.

maximum_prefix_threshold

integer

Maximum IPv4 prefix threshold value (1 - 100 percent).

maximum_prefix_threshold6

integer

Maximum IPv6 prefix threshold value (1 - 100 percent).

maximum_prefix_threshold_vpnv4

integer

Maximum VPNv4 prefix threshold value (1 - 100 percent).

maximum_prefix_vpnv4

integer

Maximum number of VPNv4 prefixes to accept from this peer.

maximum_prefix_warning_only

string

Enable/disable IPv4 Only give warning message when limit is exceeded.

Choices:

  • "enable"

  • "disable"

maximum_prefix_warning_only6

string

Enable/disable IPv6 Only give warning message when limit is exceeded.

Choices:

  • "enable"

  • "disable"

maximum_prefix_warning_only_vpnv4

string

Enable/disable only giving warning message when limit is exceeded for VPNv4 routes.

Choices:

  • "enable"

  • "disable"

name

string

Neighbor group name.

next_hop_self

string

Enable/disable IPv4 next-hop calculation for this neighbor.

Choices:

  • "enable"

  • "disable"

next_hop_self6

string

Enable/disable IPv6 next-hop calculation for this neighbor.

Choices:

  • "enable"

  • "disable"

next_hop_self_rr

string

Enable/disable setting nexthop”s address to interface”s IPv4 address for route-reflector routes.

Choices:

  • "enable"

  • "disable"

next_hop_self_rr6

string

Enable/disable setting nexthop”s address to interface”s IPv6 address for route-reflector routes.

Choices:

  • "enable"

  • "disable"

next_hop_self_vpnv4

string

Enable/disable setting VPNv4 next-hop to interface”s IP address for this neighbor.

Choices:

  • "enable"

  • "disable"

override_capability

string

Enable/disable override result of capability negotiation.

Choices:

  • "enable"

  • "disable"

passive

string

Enable/disable sending of open messages to this neighbor.

Choices:

  • "enable"

  • "disable"

prefix_list_in

string

IPv4 Inbound filter for updates from this neighbor. Source router.prefix-list.name.

prefix_list_in6

string

IPv6 Inbound filter for updates from this neighbor. Source router.prefix-list6.name.

prefix_list_in_vpnv4

string

Inbound filter for VPNv4 updates from this neighbor. Source router.prefix-list.name.

prefix_list_out

string

IPv4 Outbound filter for updates to this neighbor. Source router.prefix-list.name.

prefix_list_out6

string

IPv6 Outbound filter for updates to this neighbor. Source router.prefix-list6.name.

prefix_list_out_vpnv4

string

Outbound filter for VPNv4 updates to this neighbor. Source router.prefix-list.name.

remote_as

string

AS number of neighbor.

remove_private_as

string

Enable/disable remove private AS number from IPv4 outbound updates.

Choices:

  • "enable"

  • "disable"

remove_private_as6

string

Enable/disable remove private AS number from IPv6 outbound updates.

Choices:

  • "enable"

  • "disable"

remove_private_as_vpnv4

string

Enable/disable remove private AS number from VPNv4 outbound updates.

Choices:

  • "enable"

  • "disable"

restart_time

integer

Graceful restart delay time (sec, 0 = global default).

retain_stale_time

integer

Time to retain stale routes.

route_map_in

string

IPv4 Inbound route map filter. Source router.route-map.name.

route_map_in6

string

IPv6 Inbound route map filter. Source router.route-map.name.

route_map_in_vpnv4

string

VPNv4 inbound route map filter. Source router.route-map.name.

route_map_out

string

IPv4 outbound route map filter. Source router.route-map.name.

route_map_out6

string

IPv6 Outbound route map filter. Source router.route-map.name.

route_map_out6_preferable

string

IPv6 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_map_out_preferable

string

IPv4 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_map_out_vpnv4

string

VPNv4 outbound route map filter. Source router.route-map.name.

route_map_out_vpnv4_preferable

string

VPNv4 outbound route map filter if the peer is preferred. Source router.route-map.name.

route_reflector_client

string

Enable/disable IPv4 AS route reflector client.

Choices:

  • "enable"

  • "disable"

route_reflector_client6

string

Enable/disable IPv6 AS route reflector client.

Choices:

  • "enable"

  • "disable"

route_reflector_client_vpnv4

string

Enable/disable VPNv4 AS route reflector client for this neighbor.

Choices:

  • "enable"

  • "disable"

route_server_client

string

Enable/disable IPv4 AS route server client.

Choices:

  • "enable"

  • "disable"

route_server_client6

string

Enable/disable IPv6 AS route server client.

Choices:

  • "enable"

  • "disable"

route_server_client_vpnv4

string

Enable/disable VPNv4 AS route server client for this neighbor.

Choices:

  • "enable"

  • "disable"

send_community

string

IPv4 Send community attribute to neighbor.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

send_community6

string

IPv6 Send community attribute to neighbor.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

send_community_vpnv4

string

Send community attribute to neighbor for VPNv4 address family.

Choices:

  • "standard"

  • "extended"

  • "both"

  • "disable"

shutdown

string

Enable/disable shutdown this neighbor.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration

string

Enable/disable allow IPv4 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration6

string

Enable/disable allow IPv6 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

soft_reconfiguration_vpnv4

string

Enable/disable allow VPNv4 inbound soft reconfiguration.

Choices:

  • "enable"

  • "disable"

stale_route

string

Enable/disable stale route after neighbor down.

Choices:

  • "enable"

  • "disable"

strict_capability_match

string

Enable/disable strict capability matching.

Choices:

  • "enable"

  • "disable"

unsuppress_map

string

IPv4 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.

unsuppress_map6

string

IPv6 Route map to selectively unsuppress suppressed routes. Source router.route-map.name.

update_source

string

Interface to use as source IP/IPv6 address of TCP connections. Source system.interface.name.

weight

integer

Neighbor weight.

neighbor_range

list / elements=dictionary

BGP neighbor range table.

id

integer

Neighbor range ID.

max_neighbor_num

integer

Maximum number of neighbors.

neighbor_group

string

Neighbor group name. Source router.bgp.neighbor-group.name.

prefix

string

Neighbor range prefix.

neighbor_range6

list / elements=dictionary

BGP IPv6 neighbor range table.

id

integer

IPv6 neighbor range ID.

max_neighbor_num

integer

Maximum number of neighbors.

neighbor_group

string

Neighbor group name. Source router.bgp.neighbor-group.name.

prefix6

string

IPv6 prefix.

network

list / elements=dictionary

BGP network table.

backdoor

string

Enable/disable route as backdoor.

Choices:

  • "enable"

  • "disable"

id

integer

ID.

network_import_check

string

Configure insurance of BGP network route existence in IGP.

Choices:

  • "global"

  • "enable"

  • "disable"

prefix

string

Network prefix.

route_map

string

Route map to modify generated route. Source router.route-map.name.

network6

list / elements=dictionary

BGP IPv6 network table.

backdoor

string

Enable/disable route as backdoor.

Choices:

  • "enable"

  • "disable"

id

integer

ID.

network_import_check

string

Configure insurance of BGP network route existence in IGP.

Choices:

  • "global"

  • "enable"

  • "disable"

prefix6

string

Network IPv6 prefix.

route_map

string

Route map to modify generated route. Source router.route-map.name.

network_import_check

string

Enable/disable ensure BGP network route exists in IGP.

Choices:

  • "enable"

  • "disable"

recursive_inherit_priority

string

Enable/disable priority inheritance for recursive resolution.

Choices:

  • "enable"

  • "disable"

recursive_next_hop

string

Enable/disable recursive resolution of next-hop using BGP route.

Choices:

  • "enable"

  • "disable"

redistribute

list / elements=dictionary

BGP IPv4 redistribute table.

name

string

Distribute list entry name.

route_map

string

Route map name. Source router.route-map.name.

status

string

Status.

Choices:

  • "enable"

  • "disable"

redistribute6

list / elements=dictionary

BGP IPv6 redistribute table.

name

string

Distribute list entry name.

route_map

string

Route map name. Source router.route-map.name.

status

string

Status.

Choices:

  • "enable"

  • "disable"

router_id

string

Router ID.

scan_time

integer

Background scanner interval (sec), 0 to disable it.

synchronization

string

Enable/disable only advertise routes from iBGP if routes present in an IGP.

Choices:

  • "enable"

  • "disable"

tag_resolve_mode

string

Configure tag-match mode. Resolves BGP routes with other routes containing the same tag.

Choices:

  • "disable"

  • "preferred"

  • "merge"

vrf

list / elements=dictionary

BGP VRF leaking table.

export_rt

list / elements=dictionary

List of export route target.

route_target

string

Attribute: AA|AA:NN.

import_route_map

string

Import route map. Source router.route-map.name.

import_rt

list / elements=dictionary

List of import route target.

route_target

string

Attribute: AA|AA:NN.

leak_target

list / elements=dictionary

Target VRF table.

interface

string

Interface which is used to leak routes to target VRF. Source system.interface.name.

route_map

string

Route map of VRF leaking. Source router.route-map.name.

vrf

string

Target VRF ID (0 - 63).

rd

string

Route Distinguisher: AA|AA:NN.

role

string

VRF role.

Choices:

  • "standalone"

  • "ce"

  • "pe"

vrf

string

Origin VRF ID (0 - 63).

vrf6

list / elements=dictionary

BGP IPv6 VRF leaking table.

leak_target

list / elements=dictionary

Target VRF table.

interface

string

Interface which is used to leak routes to target VRF. Source system.interface.name.

route_map

string

Route map of VRF leaking. Source router.route-map.name.

vrf

string

Target VRF ID (0 - 63).

vrf

string

Origin VRF ID (0 - 63).

vrf_leak

list / elements=dictionary

BGP VRF leaking table.

target

list / elements=dictionary

Target VRF table.

interface

string

Interface which is used to leak routes to target VRF. Source system.interface.name.

route_map

string

Route map of VRF leaking. Source router.route-map.name.

vrf

string

Target VRF ID (0 - 31).

vrf

string

Origin VRF ID (0 - 31).

vrf_leak6

list / elements=dictionary

BGP IPv6 VRF leaking table.

target

list / elements=dictionary

Target VRF table.

interface

string

Interface which is used to leak routes to target VRF. Source system.interface.name.

route_map

string

Route map of VRF leaking. Source router.route-map.name.

vrf

string

Target VRF ID (0 - 31).

vrf

string

Origin VRF ID (0 - 31).

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure BGP.
    fortios_router_bgp:
      vdom:  "{{ vdom }}"
      router_bgp:
        additional_path: "enable"
        additional_path_select: "2"
        additional_path_select_vpnv4: "2"
        additional_path_select6: "2"
        additional_path_vpnv4: "enable"
        additional_path6: "enable"
        admin_distance:
         -
            distance: "0"
            id:  "11"
            neighbour_prefix: "<your_own_value>"
            route_list: "<your_own_value> (source router.access-list.name)"
        aggregate_address:
         -
            as_set: "enable"
            id:  "16"
            prefix: "<your_own_value>"
            summary_only: "enable"
        aggregate_address6:
         -
            as_set: "enable"
            id:  "21"
            prefix6: "<your_own_value>"
            summary_only: "enable"
        always_compare_med: "enable"
        as: "<your_own_value>"
        bestpath_as_path_ignore: "enable"
        bestpath_cmp_confed_aspath: "enable"
        bestpath_cmp_routerid: "enable"
        bestpath_med_confed: "enable"
        bestpath_med_missing_as_worst: "enable"
        client_to_client_reflection: "enable"
        cluster_id: "<your_own_value>"
        confederation_identifier: "0"
        confederation_peers:
         -
            peer: "<your_own_value>"
        dampening: "enable"
        dampening_max_suppress_time: "60"
        dampening_reachability_half_life: "15"
        dampening_reuse: "750"
        dampening_route_map: "<your_own_value> (source router.route-map.name)"
        dampening_suppress: "2000"
        dampening_unreachability_half_life: "15"
        default_local_preference: "100"
        deterministic_med: "enable"
        distance_external: "20"
        distance_internal: "200"
        distance_local: "200"
        ebgp_multipath: "enable"
        enforce_first_as: "enable"
        fast_external_failover: "enable"
        graceful_end_on_timer: "enable"
        graceful_restart: "enable"
        graceful_restart_time: "120"
        graceful_stalepath_time: "360"
        graceful_update_delay: "120"
        holdtime_timer: "180"
        ibgp_multipath: "enable"
        ignore_optional_capability: "enable"
        keepalive_timer: "60"
        log_neighbour_changes: "enable"
        multipath_recursive_distance: "enable"
        neighbor:
         -
            activate: "enable"
            activate_vpnv4: "enable"
            activate6: "enable"
            additional_path: "send"
            additional_path_vpnv4: "send"
            additional_path6: "send"
            adv_additional_path: "2"
            adv_additional_path_vpnv4: "2"
            adv_additional_path6: "2"
            advertisement_interval: "30"
            allowas_in: "3"
            allowas_in_enable: "enable"
            allowas_in_enable6: "enable"
            allowas_in_vpnv4: "0"
            allowas_in6: "3"
            as_override: "enable"
            as_override6: "enable"
            attribute_unchanged: "as-path"
            attribute_unchanged_vpnv4: "as-path"
            attribute_unchanged6: "as-path"
            bfd: "enable"
            capability_default_originate: "enable"
            capability_default_originate6: "enable"
            capability_dynamic: "enable"
            capability_graceful_restart: "enable"
            capability_graceful_restart_vpnv4: "enable"
            capability_graceful_restart6: "enable"
            capability_orf: "none"
            capability_orf6: "none"
            capability_route_refresh: "enable"
            conditional_advertise:
             -
                advertise_routemap: "<your_own_value> (source router.route-map.name)"
                condition_routemap:
                 -
                    name: "default_name_96 (source router.route-map.name)"
                condition_type: "exist"
            conditional_advertise6:
             -
                advertise_routemap: "<your_own_value> (source router.route-map.name)"
                condition_routemap:
                 -
                    name: "default_name_101 (source router.route-map.name)"
                condition_type: "exist"
            connect_timer: "4294967295"
            default_originate_routemap: "<your_own_value> (source router.route-map.name)"
            default_originate_routemap6: "<your_own_value> (source router.route-map.name)"
            description: "<your_own_value>"
            distribute_list_in: "<your_own_value> (source router.access-list.name)"
            distribute_list_in_vpnv4: "<your_own_value> (source router.access-list.name)"
            distribute_list_in6: "<your_own_value> (source router.access-list6.name)"
            distribute_list_out: "<your_own_value> (source router.access-list.name)"
            distribute_list_out_vpnv4: "<your_own_value> (source router.access-list.name)"
            distribute_list_out6: "<your_own_value> (source router.access-list6.name)"
            dont_capability_negotiate: "enable"
            ebgp_enforce_multihop: "enable"
            ebgp_multihop_ttl: "255"
            filter_list_in: "<your_own_value> (source router.aspath-list.name)"
            filter_list_in6: "<your_own_value> (source router.aspath-list.name)"
            filter_list_out: "<your_own_value> (source router.aspath-list.name)"
            filter_list_out6: "<your_own_value> (source router.aspath-list.name)"
            holdtime_timer: "4294967295"
            interface: "<your_own_value> (source system.interface.name)"
            ip: "<your_own_value>"
            keep_alive_timer: "4294967295"
            link_down_failover: "enable"
            local_as: "<your_own_value>"
            local_as_no_prepend: "enable"
            local_as_replace_as: "enable"
            maximum_prefix: "0"
            maximum_prefix_threshold: "75"
            maximum_prefix_threshold_vpnv4: "75"
            maximum_prefix_threshold6: "75"
            maximum_prefix_vpnv4: "0"
            maximum_prefix_warning_only: "enable"
            maximum_prefix_warning_only_vpnv4: "enable"
            maximum_prefix_warning_only6: "enable"
            maximum_prefix6: "0"
            next_hop_self: "enable"
            next_hop_self_rr: "enable"
            next_hop_self_rr6: "enable"
            next_hop_self_vpnv4: "enable"
            next_hop_self6: "enable"
            override_capability: "enable"
            passive: "enable"
            password: "<your_own_value>"
            prefix_list_in: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_in_vpnv4: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_in6: "<your_own_value> (source router.prefix-list6.name)"
            prefix_list_out: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_out_vpnv4: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_out6: "<your_own_value> (source router.prefix-list6.name)"
            remote_as: "<your_own_value>"
            remove_private_as: "enable"
            remove_private_as_vpnv4: "enable"
            remove_private_as6: "enable"
            restart_time: "0"
            retain_stale_time: "0"
            route_map_in: "<your_own_value> (source router.route-map.name)"
            route_map_in_vpnv4: "<your_own_value> (source router.route-map.name)"
            route_map_in6: "<your_own_value> (source router.route-map.name)"
            route_map_out: "<your_own_value> (source router.route-map.name)"
            route_map_out_preferable: "<your_own_value> (source router.route-map.name)"
            route_map_out_vpnv4: "<your_own_value> (source router.route-map.name)"
            route_map_out_vpnv4_preferable: "<your_own_value> (source router.route-map.name)"
            route_map_out6: "<your_own_value> (source router.route-map.name)"
            route_map_out6_preferable: "<your_own_value> (source router.route-map.name)"
            route_reflector_client: "enable"
            route_reflector_client_vpnv4: "enable"
            route_reflector_client6: "enable"
            route_server_client: "enable"
            route_server_client_vpnv4: "enable"
            route_server_client6: "enable"
            send_community: "standard"
            send_community_vpnv4: "standard"
            send_community6: "standard"
            shutdown: "enable"
            soft_reconfiguration: "enable"
            soft_reconfiguration_vpnv4: "enable"
            soft_reconfiguration6: "enable"
            stale_route: "enable"
            strict_capability_match: "enable"
            unsuppress_map: "<your_own_value> (source router.route-map.name)"
            unsuppress_map6: "<your_own_value> (source router.route-map.name)"
            update_source: "<your_own_value> (source system.interface.name)"
            weight: "4294967295"
        neighbor_group:
         -
            activate: "enable"
            activate_vpnv4: "enable"
            activate6: "enable"
            additional_path: "send"
            additional_path_vpnv4: "send"
            additional_path6: "send"
            adv_additional_path: "2"
            adv_additional_path_vpnv4: "2"
            adv_additional_path6: "2"
            advertisement_interval: "30"
            allowas_in: "3"
            allowas_in_enable: "enable"
            allowas_in_enable6: "enable"
            allowas_in_vpnv4: "0"
            allowas_in6: "3"
            as_override: "enable"
            as_override6: "enable"
            attribute_unchanged: "as-path"
            attribute_unchanged_vpnv4: "as-path"
            attribute_unchanged6: "as-path"
            bfd: "enable"
            capability_default_originate: "enable"
            capability_default_originate6: "enable"
            capability_dynamic: "enable"
            capability_graceful_restart: "enable"
            capability_graceful_restart_vpnv4: "enable"
            capability_graceful_restart6: "enable"
            capability_orf: "none"
            capability_orf6: "none"
            capability_route_refresh: "enable"
            connect_timer: "4294967295"
            default_originate_routemap: "<your_own_value> (source router.route-map.name)"
            default_originate_routemap6: "<your_own_value> (source router.route-map.name)"
            description: "<your_own_value>"
            distribute_list_in: "<your_own_value> (source router.access-list.name)"
            distribute_list_in_vpnv4: "<your_own_value> (source router.access-list.name)"
            distribute_list_in6: "<your_own_value> (source router.access-list6.name)"
            distribute_list_out: "<your_own_value> (source router.access-list.name)"
            distribute_list_out_vpnv4: "<your_own_value> (source router.access-list.name)"
            distribute_list_out6: "<your_own_value> (source router.access-list6.name)"
            dont_capability_negotiate: "enable"
            ebgp_enforce_multihop: "enable"
            ebgp_multihop_ttl: "255"
            filter_list_in: "<your_own_value> (source router.aspath-list.name)"
            filter_list_in6: "<your_own_value> (source router.aspath-list.name)"
            filter_list_out: "<your_own_value> (source router.aspath-list.name)"
            filter_list_out6: "<your_own_value> (source router.aspath-list.name)"
            holdtime_timer: "4294967295"
            interface: "<your_own_value> (source system.interface.name)"
            keep_alive_timer: "4294967295"
            link_down_failover: "enable"
            local_as: "<your_own_value>"
            local_as_no_prepend: "enable"
            local_as_replace_as: "enable"
            maximum_prefix: "0"
            maximum_prefix_threshold: "75"
            maximum_prefix_threshold_vpnv4: "75"
            maximum_prefix_threshold6: "75"
            maximum_prefix_vpnv4: "0"
            maximum_prefix_warning_only: "enable"
            maximum_prefix_warning_only_vpnv4: "enable"
            maximum_prefix_warning_only6: "enable"
            maximum_prefix6: "0"
            name: "default_name_249"
            next_hop_self: "enable"
            next_hop_self_rr: "enable"
            next_hop_self_rr6: "enable"
            next_hop_self_vpnv4: "enable"
            next_hop_self6: "enable"
            override_capability: "enable"
            passive: "enable"
            prefix_list_in: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_in_vpnv4: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_in6: "<your_own_value> (source router.prefix-list6.name)"
            prefix_list_out: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_out_vpnv4: "<your_own_value> (source router.prefix-list.name)"
            prefix_list_out6: "<your_own_value> (source router.prefix-list6.name)"
            remote_as: "<your_own_value>"
            remove_private_as: "enable"
            remove_private_as_vpnv4: "enable"
            remove_private_as6: "enable"
            restart_time: "0"
            retain_stale_time: "0"
            route_map_in: "<your_own_value> (source router.route-map.name)"
            route_map_in_vpnv4: "<your_own_value> (source router.route-map.name)"
            route_map_in6: "<your_own_value> (source router.route-map.name)"
            route_map_out: "<your_own_value> (source router.route-map.name)"
            route_map_out_preferable: "<your_own_value> (source router.route-map.name)"
            route_map_out_vpnv4: "<your_own_value> (source router.route-map.name)"
            route_map_out_vpnv4_preferable: "<your_own_value> (source router.route-map.name)"
            route_map_out6: "<your_own_value> (source router.route-map.name)"
            route_map_out6_preferable: "<your_own_value> (source router.route-map.name)"
            route_reflector_client: "enable"
            route_reflector_client_vpnv4: "enable"
            route_reflector_client6: "enable"
            route_server_client: "enable"
            route_server_client_vpnv4: "enable"
            route_server_client6: "enable"
            send_community: "standard"
            send_community_vpnv4: "standard"
            send_community6: "standard"
            shutdown: "enable"
            soft_reconfiguration: "enable"
            soft_reconfiguration_vpnv4: "enable"
            soft_reconfiguration6: "enable"
            stale_route: "enable"
            strict_capability_match: "enable"
            unsuppress_map: "<your_own_value> (source router.route-map.name)"
            unsuppress_map6: "<your_own_value> (source router.route-map.name)"
            update_source: "<your_own_value> (source system.interface.name)"
            weight: "4294967295"
        neighbor_range:
         -
            id:  "298"
            max_neighbor_num: "0"
            neighbor_group: "<your_own_value> (source router.bgp.neighbor-group.name)"
            prefix: "<your_own_value>"
        neighbor_range6:
         -
            id:  "303"
            max_neighbor_num: "0"
            neighbor_group: "<your_own_value> (source router.bgp.neighbor-group.name)"
            prefix6: "<your_own_value>"
        network:
         -
            backdoor: "enable"
            id:  "309"
            network_import_check: "global"
            prefix: "<your_own_value>"
            route_map: "<your_own_value> (source router.route-map.name)"
        network_import_check: "enable"
        network6:
         -
            backdoor: "enable"
            id:  "316"
            network_import_check: "global"
            prefix6: "<your_own_value>"
            route_map: "<your_own_value> (source router.route-map.name)"
        recursive_inherit_priority: "enable"
        recursive_next_hop: "enable"
        redistribute:
         -
            name: "default_name_323"
            route_map: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        redistribute6:
         -
            name: "default_name_327"
            route_map: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        router_id: "<your_own_value>"
        scan_time: "60"
        synchronization: "enable"
        tag_resolve_mode: "disable"
        vrf:
         -
            export_rt:
             -
                route_target: "<your_own_value>"
            import_route_map: "<your_own_value> (source router.route-map.name)"
            import_rt:
             -
                route_target: "<your_own_value>"
            leak_target:
             -
                interface: "<your_own_value> (source system.interface.name)"
                route_map: "<your_own_value> (source router.route-map.name)"
                vrf: "<your_own_value>"
            rd: "<your_own_value>"
            role: "standalone"
            vrf: "<your_own_value>"
        vrf_leak:
         -
            target:
             -
                interface: "<your_own_value> (source system.interface.name)"
                route_map: "<your_own_value> (source router.route-map.name)"
                vrf: "<your_own_value>"
            vrf: "<your_own_value>"
        vrf_leak6:
         -
            target:
             -
                interface: "<your_own_value> (source system.interface.name)"
                route_map: "<your_own_value> (source router.route-map.name)"
                vrf: "<your_own_value>"
            vrf: "<your_own_value>"
        vrf6:
         -
            leak_target:
             -
                interface: "<your_own_value> (source system.interface.name)"
                route_map: "<your_own_value> (source router.route-map.name)"
                vrf: "<your_own_value>"
            vrf: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)