fortinet.fortios.fortios_switch_controller_managed_switch module – Configure FortiSwitch devices that are managed by this FortiGate in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_switch_controller_managed_switch.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify switch_controller feature and managed_switch category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

switch_controller_managed_switch

dictionary

Configure FortiSwitch devices that are managed by this FortiGate.

access_profile

string

FortiSwitch access profile. Source switch-controller.security-policy.local-access.name.

custom_command

list / elements=dictionary

Configuration method to edit FortiSwitch commands to be pushed to this FortiSwitch device upon rebooting the FortiGate switch controller or the FortiSwitch.

command_entry

string

List of FortiSwitch commands.

command_name

string

Names of commands to be pushed to this FortiSwitch device, as configured under config switch-controller custom-command. Source switch-controller.custom-command.command-name.

delayed_restart_trigger

integer

Delayed restart triggered for this FortiSwitch.

description

string

Description.

dhcp_server_access_list

string

DHCP snooping server access list.

Choices:

  • "global"

  • "enable"

  • "disable"

directly_connected

integer

Directly connected FortiSwitch.

dynamic_capability

string

List of features this FortiSwitch supports (not configurable) that is sent to the FortiGate device for subsequent configuration initiated by the FortiGate device.

dynamically_discovered

integer

Dynamically discovered FortiSwitch.

firmware_provision

string

Enable/disable provisioning of firmware to FortiSwitches on join connection.

Choices:

  • "enable"

  • "disable"

firmware_provision_latest

string

Enable/disable one-time automatic provisioning of the latest firmware version.

Choices:

  • "disable"

  • "once"

firmware_provision_version

string

Firmware version to provision to this FortiSwitch on bootup (major.minor.build, i.e. 6.2.1234).

flow_identity

string

Flow-tracking netflow ipfix switch identity in hex format(00000000-FFFFFFFF ).

fsw_wan1_admin

string

FortiSwitch WAN1 admin status; enable to authorize the FortiSwitch as a managed switch.

Choices:

  • "discovered"

  • "disable"

  • "enable"

fsw_wan1_peer

string

FortiSwitch WAN1 peer port. Source system.interface.name.

fsw_wan2_admin

string

FortiSwitch WAN2 admin status; enable to authorize the FortiSwitch as a managed switch.

Choices:

  • "discovered"

  • "disable"

  • "enable"

fsw_wan2_peer

string

FortiSwitch WAN2 peer port.

igmp_snooping

dictionary

Configure FortiSwitch IGMP snooping global settings.

aging_time

integer

Maximum time to retain a multicast snooping entry for which no packets have been seen (15 - 3600 sec).

flood_unknown_multicast

string

Enable/disable unknown multicast flooding.

Choices:

  • "enable"

  • "disable"

local_override

string

Enable/disable overriding the global IGMP snooping configuration.

Choices:

  • "enable"

  • "disable"

vlans

list / elements=dictionary

Configure IGMP snooping VLAN.

proxy

string

IGMP snooping proxy for the VLAN interface.

Choices:

  • "disable"

  • "enable"

  • "global"

querier

string

Enable/disable IGMP snooping querier for the VLAN interface.

Choices:

  • "disable"

  • "enable"

querier_addr

string

IGMP snooping querier address.

version

integer

IGMP snooping querying version.

vlan_name

string

List of FortiSwitch VLANs. Source system.interface.name.

ip_source_guard

list / elements=dictionary

IP source guard.

binding_entry

list / elements=dictionary

IP and MAC address configuration.

entry_name

string

Configure binding pair.

ip

string

Source IP for this rule.

mac

string

MAC address for this rule.

description

string

Description.

port

string

Ingress interface to which source guard is bound.

l3_discovered

integer

Layer 3 management discovered.

max_allowed_trunk_members

integer

FortiSwitch maximum allowed trunk members.

mclag_igmp_snooping_aware

string

Enable/disable MCLAG IGMP-snooping awareness.

Choices:

  • "enable"

  • "disable"

mirror

list / elements=dictionary

Configuration method to edit FortiSwitch packet mirror.

dst

string

Destination port.

name

string

Mirror name.

src_egress

list / elements=dictionary

Source egress interfaces.

name

string

Interface name.

src_ingress

list / elements=dictionary

Source ingress interfaces.

name

string

Interface name.

status

string

Active/inactive mirror configuration.

Choices:

  • "active"

  • "inactive"

switching_packet

string

Enable/disable switching functionality when mirroring.

Choices:

  • "enable"

  • "disable"

name

string

Managed-switch name.

override_snmp_community

string

Enable/disable overriding the global SNMP communities.

Choices:

  • "enable"

  • "disable"

override_snmp_sysinfo

string

Enable/disable overriding the global SNMP system information.

Choices:

  • "disable"

  • "enable"

override_snmp_trap_threshold

string

Enable/disable overriding the global SNMP trap threshold values.

Choices:

  • "enable"

  • "disable"

override_snmp_user

string

Enable/disable overriding the global SNMP users.

Choices:

  • "enable"

  • "disable"

owner_vdom

string

VDOM which owner of port belongs to.

poe_detection_type

integer

PoE detection type for FortiSwitch.

poe_lldp_detection

string

Enable/disable PoE LLDP detection.

Choices:

  • "enable"

  • "disable"

poe_pre_standard_detection

string

Enable/disable PoE pre-standard detection.

Choices:

  • "enable"

  • "disable"

ports

list / elements=dictionary

Managed-switch port list.

access_mode

string

Access mode of the port.

Choices:

  • "dynamic"

  • "nac"

  • "static"

  • "normal"

aggregator_mode

string

LACP member select mode.

Choices:

  • "bandwidth"

  • "count"

allowed_vlans

list / elements=dictionary

Configure switch port tagged VLANs.

vlan_name

string

VLAN name. Source system.interface.name.

allowed_vlans_all

string

Enable/disable all defined vlans on this port.

Choices:

  • "enable"

  • "disable"

arp_inspection_trust

string

Trusted or untrusted dynamic ARP inspection.

Choices:

  • "untrusted"

  • "trusted"

bundle

string

Enable/disable Link Aggregation Group (LAG) bundling for non-FortiLink interfaces.

Choices:

  • "enable"

  • "disable"

description

string

Description for port.

dhcp_snoop_option82_trust

string

Enable/disable allowance of DHCP with option-82 on untrusted interface.

Choices:

  • "enable"

  • "disable"

dhcp_snooping

string

Trusted or untrusted DHCP-snooping interface.

Choices:

  • "untrusted"

  • "trusted"

discard_mode

string

Configure discard mode for port.

Choices:

  • "none"

  • "all-untagged"

  • "all-tagged"

edge_port

string

Enable/disable this interface as an edge port, bridging connections between workstations and/or computers.

Choices:

  • "enable"

  • "disable"

export_tags

list / elements=dictionary

Configure export tag(s) for FortiSwitch port when exported to a virtual port pool.

tag_name

string

FortiSwitch port tag name when exported to a virtual port pool. Source switch-controller.switch-interface-tag.name.

export_to

string

Export managed-switch port to a tenant VDOM. Source system.vdom.name.

export_to_pool

string

Switch controller export port to pool-list. Source switch-controller.virtual-port-pool.name.

export_to_pool_flag

integer

Switch controller export port to pool-list.

fec_capable

integer

FEC capable.

fec_state

string

State of forward error correction.

Choices:

  • "disabled"

  • "cl74"

  • "cl91"

fgt_peer_device_name

string

FGT peer device name.

fgt_peer_port_name

string

FGT peer port name.

fiber_port

integer

Fiber-port.

flags

integer

Port properties flags.

flap_duration

integer

Period over which flap events are calculated (seconds).

flap_rate

integer

Number of stage change events needed within flap-duration.

flap_timeout

integer

Flap guard disabling protection (min).

flapguard

string

Enable/disable flap guard.

Choices:

  • "enable"

  • "disable"

flow_control

string

Flow control direction.

Choices:

  • "disable"

  • "tx"

  • "rx"

  • "both"

integer

FortiLink uplink port.

igmp_snooping

string

Set IGMP snooping mode for the physical port interface.

Choices:

  • "enable"

  • "disable"

igmp_snooping_flood_reports

string

Enable/disable flooding of IGMP reports to this interface when igmp-snooping enabled.

Choices:

  • "enable"

  • "disable"

igmps_flood_reports

string

Enable/disable flooding of IGMP reports to this interface when igmp-snooping enabled.

Choices:

  • "enable"

  • "disable"

igmps_flood_traffic

string

Enable/disable flooding of IGMP snooping traffic to this interface.

Choices:

  • "enable"

  • "disable"

interface_tags

list / elements=dictionary

Tag(s) associated with the interface for various features including virtual port pool, dynamic port policy.

tag_name

string

FortiSwitch port tag name when exported to a virtual port pool or matched to dynamic port policy. Source switch-controller.switch-interface-tag.name.

ip_source_guard

string

Enable/disable IP source guard.

Choices:

  • "disable"

  • "enable"

isl_local_trunk_name

string

ISL local trunk name.

isl_peer_device_name

string

ISL peer device name.

isl_peer_port_name

string

ISL peer port name.

lacp_speed

string

End Link Aggregation Control Protocol (LACP) messages every 30 seconds (slow) or every second (fast).

Choices:

  • "slow"

  • "fast"

learning_limit

integer

Limit the number of dynamic MAC addresses on this Port (1 - 128, 0 = no limit, default).

lldp_profile

string

LLDP port TLV profile. Source switch-controller.lldp-profile.name.

lldp_status

string

LLDP transmit and receive status.

Choices:

  • "disable"

  • "rx-only"

  • "tx-only"

  • "tx-rx"

loop_guard

string

Enable/disable loop-guard on this interface, an STP optimization used to prevent network loops.

Choices:

  • "enabled"

  • "disabled"

loop_guard_timeout

integer

Loop-guard timeout (0 - 120 min).

mac_addr

string

Port/Trunk MAC.

matched_dpp_intf_tags

string

Matched interface tags in the dynamic port policy.

matched_dpp_policy

string

Matched child policy in the dynamic port policy.

max_bundle

integer

Maximum size of LAG bundle (1 - 24).

mcast_snooping_flood_traffic

string

Enable/disable flooding of IGMP snooping traffic to this interface.

Choices:

  • "enable"

  • "disable"

mclag

string

Enable/disable multi-chassis link aggregation (MCLAG).

Choices:

  • "enable"

  • "disable"

mclag_icl_port

integer

MCLAG-ICL port.

media_type

string

Media type.

member_withdrawal_behavior

string

Port behavior after it withdraws because of loss of control packets.

Choices:

  • "forward"

  • "block"

members

list / elements=dictionary

Aggregated LAG bundle interfaces.

member_name

string

Interface name from available options.

min_bundle

integer

Minimum size of LAG bundle (1 - 24).

mode

string

LACP mode: ignore and do not send control messages, or negotiate 802.3ad aggregation passively or actively.

Choices:

  • "static"

  • "lacp-passive"

  • "lacp-active"

p2p_port

integer

General peer to peer tunnel port.

packet_sample_rate

integer

Packet sampling rate (0 - 99999 p/sec).

packet_sampler

string

Enable/disable packet sampling on this interface.

Choices:

  • "enabled"

  • "disabled"

pause_meter

integer

Configure ingress pause metering rate, in kbps .

pause_meter_resume

string

Resume threshold for resuming traffic on ingress port.

Choices:

  • "75%"

  • "50%"

  • "25%"

poe_capable

integer

PoE capable.

poe_max_power

string

PoE maximum power.

poe_pre_standard_detection

string

Enable/disable PoE pre-standard detection.

Choices:

  • "enable"

  • "disable"

poe_standard

string

PoE standard supported.

poe_status

string

Enable/disable PoE status.

Choices:

  • "enable"

  • "disable"

port_name

string

Switch port name.

port_number

integer

Port number.

port_owner

string

Switch port name.

port_policy

string

Switch controller dynamic port policy from available options. Source switch-controller.dynamic-port-policy.name.

port_prefix_type

integer

Port prefix type.

port_security_policy

string

Switch controller authentication policy to apply to this managed switch from available options. Source switch-controller .security-policy.802-1X.name.

port_selection_criteria

string

Algorithm for aggregate port selection.

Choices:

  • "src-mac"

  • "dst-mac"

  • "src-dst-mac"

  • "src-ip"

  • "dst-ip"

  • "src-dst-ip"

ptp_policy

string

PTP policy configuration. Source switch-controller.ptp.policy.name.

qos_policy

string

Switch controller QoS policy from available options. Source switch-controller.qos.qos-policy.name.

rpvst_port

string

Enable/disable inter-operability with rapid PVST on this interface.

Choices:

  • "disabled"

  • "enabled"

sample_direction

string

Packet sampling direction.

Choices:

  • "tx"

  • "rx"

  • "both"

sflow_counter_interval

integer

sFlow sampling counter polling interval in seconds (0 - 255).

sflow_sample_rate

integer

sFlow sampler sample rate (0 - 99999 p/sec).

sflow_sampler

string

Enable/disable sFlow protocol on this interface.

Choices:

  • "enabled"

  • "disabled"

speed

string

Switch port speed; default and available settings depend on hardware.

Choices:

  • "10half"

  • "10full"

  • "100half"

  • "100full"

  • "1000auto"

  • "1000fiber"

  • "1000full"

  • "10000"

  • "40000"

  • "auto"

  • "auto-module"

  • "100FX-half"

  • "100FX-full"

  • "100000full"

  • "2500auto"

  • "25000full"

  • "50000full"

  • "10000cr"

  • "10000sr"

  • "100000sr4"

  • "100000cr4"

  • "25000cr4"

  • "25000sr4"

  • "5000full"

  • "1000full-fiber"

  • "10000full"

  • "40000full"

  • "40000sr4"

  • "40000cr4"

  • "25000cr"

  • "25000sr"

  • "50000cr"

  • "50000sr"

  • "5000auto"

  • "2500full"

speed_mask

integer

Switch port speed mask.

stacking_port

integer

Stacking port.

status

string

Switch port admin status: up or down.

Choices:

  • "up"

  • "down"

sticky_mac

string

Enable or disable sticky-mac on the interface.

Choices:

  • "enable"

  • "disable"

storm_control_policy

string

Switch controller storm control policy from available options. Source switch-controller.storm-control-policy.name.

stp_bpdu_guard

string

Enable/disable STP BPDU guard on this interface.

Choices:

  • "enabled"

  • "disabled"

stp_bpdu_guard_timeout

integer

BPDU Guard disabling protection (0 - 120 min).

stp_root_guard

string

Enable/disable STP root guard on this interface.

Choices:

  • "enabled"

  • "disabled"

stp_state

string

Enable/disable Spanning Tree Protocol (STP) on this interface.

Choices:

  • "enabled"

  • "disabled"

switch_id

string

Switch id.

type

string

Interface type: physical or trunk port.

Choices:

  • "physical"

  • "trunk"

untagged_vlans

list / elements=dictionary

Configure switch port untagged VLANs.

vlan_name

string

VLAN name. Source system.interface.name.

virtual_port

integer

Virtualized switch port.

vlan

string

Assign switch ports to a VLAN. Source system.interface.name.

pre_provisioned

integer

Pre-provisioned managed switch.

qos_drop_policy

string

Set QoS drop-policy.

Choices:

  • "taildrop"

  • "random-early-detection"

qos_red_probability

integer

Set QoS RED/WRED drop probability.

remote_log

list / elements=dictionary

Configure logging by FortiSwitch device to a remote syslog server.

csv

string

Enable/disable comma-separated value (CSV) strings.

Choices:

  • "enable"

  • "disable"

facility

string

Facility to log to remote syslog server.

Choices:

  • "kernel"

  • "user"

  • "mail"

  • "daemon"

  • "auth"

  • "syslog"

  • "lpr"

  • "news"

  • "uucp"

  • "cron"

  • "authpriv"

  • "ftp"

  • "ntp"

  • "audit"

  • "alert"

  • "clock"

  • "local0"

  • "local1"

  • "local2"

  • "local3"

  • "local4"

  • "local5"

  • "local6"

  • "local7"

name

string

Remote log name.

port

integer

Remote syslog server listening port.

server

string

IPv4 address of the remote syslog server.

severity

string

Severity of logs to be transferred to remote log server.

Choices:

  • "emergency"

  • "alert"

  • "critical"

  • "error"

  • "warning"

  • "notification"

  • "information"

  • "debug"

status

string

Enable/disable logging by FortiSwitch device to a remote syslog server.

Choices:

  • "enable"

  • "disable"

settings_802_1X

dictionary

Configuration method to edit FortiSwitch 802.1X global settings.

string

Authentication state to set if a link is down.

Choices:

  • "set-unauth"

  • "no-action"

local_override

string

Enable to override global 802.1X settings on individual FortiSwitches.

Choices:

  • "enable"

  • "disable"

mab_reauth

string

Enable or disable MAB reauthentication settings.

Choices:

  • "disable"

  • "enable"

max_reauth_attempt

integer

Maximum number of authentication attempts (0 - 15).

reauth_period

integer

Reauthentication time interval (1 - 1440 min).

tx_period

integer

802.1X Tx period (seconds).

snmp_community

list / elements=dictionary

Configuration method to edit Simple Network Management Protocol (SNMP) communities.

events

list / elements=string

SNMP notifications (traps) to send.

Choices:

  • "cpu-high"

  • "mem-low"

  • "log-full"

  • "intf-ip"

  • "ent-conf-change"

hosts

list / elements=dictionary

Configure IPv4 SNMP managers (hosts).

id

integer

Host entry ID.

ip

string

IPv4 address of the SNMP manager (host).

id

integer

SNMP community ID.

name

string

SNMP community name.

query_v1_port

integer

SNMP v1 query port .

query_v1_status

string

Enable/disable SNMP v1 queries.

Choices:

  • "disable"

  • "enable"

query_v2c_port

integer

SNMP v2c query port .

query_v2c_status

string

Enable/disable SNMP v2c queries.

Choices:

  • "disable"

  • "enable"

status

string

Enable/disable this SNMP community.

Choices:

  • "disable"

  • "enable"

trap_v1_lport

integer

SNMP v2c trap local port .

trap_v1_rport

integer

SNMP v2c trap remote port .

trap_v1_status

string

Enable/disable SNMP v1 traps.

Choices:

  • "disable"

  • "enable"

trap_v2c_lport

integer

SNMP v2c trap local port .

trap_v2c_rport

integer

SNMP v2c trap remote port .

trap_v2c_status

string

Enable/disable SNMP v2c traps.

Choices:

  • "disable"

  • "enable"

snmp_sysinfo

dictionary

Configuration method to edit Simple Network Management Protocol (SNMP) system info.

contact_info

string

Contact information.

description

string

System description.

engine_id

string

Local SNMP engine ID string (max 24 char).

location

string

System location.

status

string

Enable/disable SNMP.

Choices:

  • "disable"

  • "enable"

snmp_trap_threshold

dictionary

Configuration method to edit Simple Network Management Protocol (SNMP) trap threshold values.

trap_high_cpu_threshold

integer

CPU usage when trap is sent.

trap_log_full_threshold

integer

Log disk usage when trap is sent.

trap_low_memory_threshold

integer

Memory usage when trap is sent.

snmp_user

list / elements=dictionary

Configuration method to edit Simple Network Management Protocol (SNMP) users.

auth_proto

string

Authentication protocol.

Choices:

  • "md5"

  • "sha1"

  • "sha224"

  • "sha256"

  • "sha384"

  • "sha512"

  • "sha"

auth_pwd

string

Password for authentication protocol.

name

string

SNMP user name.

priv_proto

string

Privacy (encryption) protocol.

Choices:

  • "aes128"

  • "aes192"

  • "aes192c"

  • "aes256"

  • "aes256c"

  • "des"

  • "aes"

priv_pwd

string

Password for privacy (encryption) protocol.

queries

string

Enable/disable SNMP queries for this user.

Choices:

  • "disable"

  • "enable"

query_port

integer

SNMPv3 query port .

security_level

string

Security level for message authentication and encryption.

Choices:

  • "no-auth-no-priv"

  • "auth-no-priv"

  • "auth-priv"

staged_image_version

string

Staged image version for FortiSwitch.

static_mac

list / elements=dictionary

Configuration method to edit FortiSwitch Static and Sticky MAC.

description

string

Description.

id

integer

ID.

interface

string

Interface name.

mac

string

MAC address.

type

string

Type.

Choices:

  • "static"

  • "sticky"

vlan

string

Vlan. Source system.interface.name.

storm_control

dictionary

Configuration method to edit FortiSwitch storm control for measuring traffic activity using data rates to prevent traffic disruption.

broadcast

string

Enable/disable storm control to drop broadcast traffic.

Choices:

  • "enable"

  • "disable"

local_override

string

Enable to override global FortiSwitch storm control settings for this FortiSwitch.

Choices:

  • "enable"

  • "disable"

rate

integer

Rate in packets per second at which storm traffic is controlled (1 - 10000000). Storm control drops excess traffic data rates beyond this threshold.

unknown_multicast

string

Enable/disable storm control to drop unknown multicast traffic.

Choices:

  • "enable"

  • "disable"

unknown_unicast

string

Enable/disable storm control to drop unknown unicast traffic.

Choices:

  • "enable"

  • "disable"

stp_instance

list / elements=dictionary

Configuration method to edit Spanning Tree Protocol (STP) instances.

id

string

Instance ID.

priority

string

Priority.

Choices:

  • "0"

  • "4096"

  • "8192"

  • "12288"

  • "16384"

  • "20480"

  • "24576"

  • "28672"

  • "32768"

  • "36864"

  • "40960"

  • "45056"

  • "49152"

  • "53248"

  • "57344"

  • "61440"

stp_settings

dictionary

Configuration method to edit Spanning Tree Protocol (STP) settings used to prevent bridge loops.

forward_time

integer

Period of time a port is in listening and learning state (4 - 30 sec).

hello_time

integer

Period of time between successive STP frame Bridge Protocol Data Units (BPDUs) sent on a port (1 - 10 sec).

local_override

string

Enable to configure local STP settings that override global STP settings.

Choices:

  • "enable"

  • "disable"

max_age

integer

Maximum time before a bridge port saves its configuration BPDU information (6 - 40 sec).

max_hops

integer

Maximum number of hops between the root bridge and the furthest bridge (1- 40).

name

string

Name of local STP settings configuration.

pending_timer

integer

Pending time (1 - 15 sec).

revision

integer

STP revision number (0 - 65535).

status

string

Enable/disable STP.

Choices:

  • "enable"

  • "disable"

switch_device_tag

string

User definable label/tag.

switch_dhcp_opt43_key

string

DHCP option43 key.

switch_id

string

Managed-switch id.

switch_log

dictionary

Configuration method to edit FortiSwitch logging settings (logs are transferred to and inserted into the FortiGate event log).

local_override

string

Enable to configure local logging settings that override global logging settings.

Choices:

  • "enable"

  • "disable"

severity

string

Severity of FortiSwitch logs that are added to the FortiGate event log.

Choices:

  • "emergency"

  • "alert"

  • "critical"

  • "error"

  • "warning"

  • "notification"

  • "information"

  • "debug"

status

string

Enable/disable adding FortiSwitch logs to the FortiGate event log.

Choices:

  • "enable"

  • "disable"

switch_profile

string

FortiSwitch profile. Source switch-controller.switch-profile.name.

switch_stp_settings

dictionary

Configure spanning tree protocol (STP).

status

string

Enable/disable STP.

Choices:

  • "enable"

  • "disable"

tdr_supported

string

TDR supported.

type

string

Indication of switch type, physical or virtual.

Choices:

  • "virtual"

  • "physical"

version

integer

FortiSwitch version.

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure FortiSwitch devices that are managed by this FortiGate.
    fortios_switch_controller_managed_switch:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      switch_controller_managed_switch:
        settings_802_1X:
            link_down_auth: "set-unauth"
            local_override: "enable"
            mab_reauth: "disable"
            max_reauth_attempt: "3"
            reauth_period: "60"
            tx_period: "30"
        access_profile: "<your_own_value> (source switch-controller.security-policy.local-access.name)"
        custom_command:
         -
            command_entry: "<your_own_value>"
            command_name: "<your_own_value> (source switch-controller.custom-command.command-name)"
        delayed_restart_trigger: "0"
        description: "<your_own_value>"
        dhcp_server_access_list: "global"
        directly_connected: "0"
        dynamic_capability: "<your_own_value>"
        dynamically_discovered: "0"
        firmware_provision: "enable"
        firmware_provision_latest: "disable"
        firmware_provision_version: "<your_own_value>"
        flow_identity: "<your_own_value>"
        fsw_wan1_admin: "discovered"
        fsw_wan1_peer: "<your_own_value> (source system.interface.name)"
        fsw_wan2_admin: "discovered"
        fsw_wan2_peer: "<your_own_value>"
        igmp_snooping:
            aging_time: "300"
            flood_unknown_multicast: "enable"
            local_override: "enable"
            vlans:
             -
                proxy: "disable"
                querier: "disable"
                querier_addr: "<your_own_value>"
                version: "2"
                vlan_name: "<your_own_value> (source system.interface.name)"
        ip_source_guard:
         -
            binding_entry:
             -
                entry_name: "<your_own_value>"
                ip: "<your_own_value>"
                mac: "<your_own_value>"
            description: "<your_own_value>"
            port: "<your_own_value>"
        l3_discovered: "0"
        max_allowed_trunk_members: "0"
        mclag_igmp_snooping_aware: "enable"
        mirror:
         -
            dst: "<your_own_value>"
            name: "default_name_50"
            src_egress:
             -
                name: "default_name_52"
            src_ingress:
             -
                name: "default_name_54"
            status: "active"
            switching_packet: "enable"
        name: "default_name_57"
        override_snmp_community: "enable"
        override_snmp_sysinfo: "disable"
        override_snmp_trap_threshold: "enable"
        override_snmp_user: "enable"
        owner_vdom: "<your_own_value>"
        poe_detection_type: "0"
        poe_lldp_detection: "enable"
        poe_pre_standard_detection: "enable"
        ports:
         -
            access_mode: "dynamic"
            aggregator_mode: "bandwidth"
            allowed_vlans:
             -
                vlan_name: "<your_own_value> (source system.interface.name)"
            allowed_vlans_all: "enable"
            arp_inspection_trust: "untrusted"
            bundle: "enable"
            description: "<your_own_value>"
            dhcp_snoop_option82_trust: "enable"
            dhcp_snooping: "untrusted"
            discard_mode: "none"
            edge_port: "enable"
            export_tags:
             -
                tag_name: "<your_own_value> (source switch-controller.switch-interface-tag.name)"
            export_to: "<your_own_value> (source system.vdom.name)"
            export_to_pool: "<your_own_value> (source switch-controller.virtual-port-pool.name)"
            export_to_pool_flag: "0"
            fec_capable: "0"
            fec_state: "disabled"
            fgt_peer_device_name: "<your_own_value>"
            fgt_peer_port_name: "<your_own_value>"
            fiber_port: "0"
            flags: "0"
            flap_duration: "30"
            flap_rate: "5"
            flap_timeout: "0"
            flapguard: "enable"
            flow_control: "disable"
            fortilink_port: "0"
            igmp_snooping: "enable"
            igmp_snooping_flood_reports: "enable"
            igmps_flood_reports: "enable"
            igmps_flood_traffic: "enable"
            interface_tags:
             -
                tag_name: "<your_own_value> (source switch-controller.switch-interface-tag.name)"
            ip_source_guard: "disable"
            isl_local_trunk_name: "<your_own_value>"
            isl_peer_device_name: "<your_own_value>"
            isl_peer_port_name: "<your_own_value>"
            lacp_speed: "slow"
            learning_limit: "0"
            lldp_profile: "<your_own_value> (source switch-controller.lldp-profile.name)"
            lldp_status: "disable"
            loop_guard: "enabled"
            loop_guard_timeout: "45"
            mac_addr: "<your_own_value>"
            matched_dpp_intf_tags: "<your_own_value>"
            matched_dpp_policy: "<your_own_value>"
            max_bundle: "24"
            mcast_snooping_flood_traffic: "enable"
            mclag: "enable"
            mclag_icl_port: "0"
            media_type: "<your_own_value>"
            member_withdrawal_behavior: "forward"
            members:
             -
                member_name: "<your_own_value>"
            min_bundle: "1"
            mode: "static"
            p2p_port: "0"
            packet_sample_rate: "512"
            packet_sampler: "enabled"
            pause_meter: "0"
            pause_meter_resume: "75%"
            poe_capable: "0"
            poe_max_power: "<your_own_value>"
            poe_pre_standard_detection: "enable"
            poe_standard: "<your_own_value>"
            poe_status: "enable"
            port_name: "<your_own_value>"
            port_number: "0"
            port_owner: "<your_own_value>"
            port_policy: "<your_own_value> (source switch-controller.dynamic-port-policy.name)"
            port_prefix_type: "0"
            port_security_policy: "<your_own_value> (source switch-controller.security-policy.802-1X.name)"
            port_selection_criteria: "src-mac"
            ptp_policy: "<your_own_value> (source switch-controller.ptp.policy.name)"
            qos_policy: "<your_own_value> (source switch-controller.qos.qos-policy.name)"
            rpvst_port: "disabled"
            sample_direction: "tx"
            sflow_counter_interval: "0"
            sflow_sample_rate: "49999"
            sflow_sampler: "enabled"
            speed: "10half"
            speed_mask: "2147483647"
            stacking_port: "0"
            status: "up"
            sticky_mac: "enable"
            storm_control_policy: "<your_own_value> (source switch-controller.storm-control-policy.name)"
            stp_bpdu_guard: "enabled"
            stp_bpdu_guard_timeout: "5"
            stp_root_guard: "enabled"
            stp_state: "enabled"
            switch_id: "<your_own_value>"
            type: "physical"
            untagged_vlans:
             -
                vlan_name: "<your_own_value> (source system.interface.name)"
            virtual_port: "0"
            vlan: "<your_own_value> (source system.interface.name)"
        pre_provisioned: "0"
        qos_drop_policy: "taildrop"
        qos_red_probability: "12"
        remote_log:
         -
            csv: "enable"
            facility: "kernel"
            name: "default_name_171"
            port: "514"
            server: "192.168.100.40"
            severity: "emergency"
            status: "enable"
        snmp_community:
         -
            events: "cpu-high"
            hosts:
             -
                id:  "179"
                ip: "<your_own_value>"
            id:  "181"
            name: "default_name_182"
            query_v1_port: "161"
            query_v1_status: "disable"
            query_v2c_port: "161"
            query_v2c_status: "disable"
            status: "disable"
            trap_v1_lport: "162"
            trap_v1_rport: "162"
            trap_v1_status: "disable"
            trap_v2c_lport: "162"
            trap_v2c_rport: "162"
            trap_v2c_status: "disable"
        snmp_sysinfo:
            contact_info: "<your_own_value>"
            description: "<your_own_value>"
            engine_id: "<your_own_value>"
            location: "<your_own_value>"
            status: "disable"
        snmp_trap_threshold:
            trap_high_cpu_threshold: "80"
            trap_log_full_threshold: "90"
            trap_low_memory_threshold: "80"
        snmp_user:
         -
            auth_proto: "md5"
            auth_pwd: "<your_own_value>"
            name: "default_name_207"
            priv_proto: "aes128"
            priv_pwd: "<your_own_value>"
            queries: "disable"
            query_port: "161"
            security_level: "no-auth-no-priv"
        staged_image_version: "<your_own_value>"
        static_mac:
         -
            description: "<your_own_value>"
            id:  "216"
            interface: "<your_own_value>"
            mac: "<your_own_value>"
            type: "static"
            vlan: "<your_own_value> (source system.interface.name)"
        storm_control:
            broadcast: "enable"
            local_override: "enable"
            rate: "500"
            unknown_multicast: "enable"
            unknown_unicast: "enable"
        stp_instance:
         -
            id:  "228"
            priority: "0"
        stp_settings:
            forward_time: "15"
            hello_time: "2"
            local_override: "enable"
            max_age: "20"
            max_hops: "20"
            name: "default_name_236"
            pending_timer: "4"
            revision: "0"
            status: "enable"
        switch_device_tag: "<your_own_value>"
        switch_dhcp_opt43_key: "<your_own_value>"
        switch_id: "<your_own_value>"
        switch_log:
            local_override: "enable"
            severity: "emergency"
            status: "enable"
        switch_profile: "<your_own_value> (source switch-controller.switch-profile.name)"
        switch_stp_settings:
            status: "enable"
        tdr_supported: "<your_own_value>"
        type: "virtual"
        version: "0"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)