fortinet.fortios.fortios_system_settings module – Configure VDOM settings in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_system_settings.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and settings category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

system_settings

dictionary

Configure VDOM settings.

allow_linkdown_path

string

Enable/disable link down path.

Choices:

  • "enable"

  • "disable"

allow_subnet_overlap

string

Enable/disable allowing interface subnets to use overlapping IP addresses.

Choices:

  • "enable"

  • "disable"

application_bandwidth_tracking

string

Enable/disable application bandwidth tracking.

Choices:

  • "disable"

  • "enable"

asymroute

string

Enable/disable IPv4 asymmetric routing.

Choices:

  • "enable"

  • "disable"

asymroute6

string

Enable/disable asymmetric IPv6 routing.

Choices:

  • "enable"

  • "disable"

asymroute6_icmp

string

Enable/disable asymmetric ICMPv6 routing.

Choices:

  • "enable"

  • "disable"

asymroute_icmp

string

Enable/disable ICMP asymmetric routing.

Choices:

  • "enable"

  • "disable"

auxiliary_session

string

Enable/disable auxiliary session.

Choices:

  • "enable"

  • "disable"

bfd

string

Enable/disable Bi-directional Forwarding Detection (BFD) on all interfaces.

Choices:

  • "enable"

  • "disable"

bfd_desired_min_tx

integer

BFD desired minimal transmit interval (1 - 100000 ms).

bfd_detect_mult

integer

BFD detection multiplier (1 - 50).

bfd_dont_enforce_src_port

string

Enable to not enforce verifying the source port of BFD Packets.

Choices:

  • "enable"

  • "disable"

bfd_required_min_rx

integer

BFD required minimal receive interval (1 - 100000 ms).

block_land_attack

string

Enable/disable blocking of land attacks.

Choices:

  • "disable"

  • "enable"

central_nat

string

Enable/disable central NAT.

Choices:

  • "enable"

  • "disable"

comments

string

VDOM comments.

compliance_check

string

Enable/disable PCI DSS compliance checking.

Choices:

  • "enable"

  • "disable"

consolidated_firewall_mode

string

Consolidated firewall mode.

Choices:

  • "enable"

  • "disable"

default_app_port_as_service

string

Enable/disable policy service enforcement based on application default ports.

Choices:

  • "enable"

  • "disable"

default_policy_expiry_days

integer

Default policy expiry in days (0 - 365 days).

default_voip_alg_mode

string

Configure how the FortiGate handles VoIP traffic when a policy that accepts the traffic doesn”t include a VoIP profile.

Choices:

  • "proxy-based"

  • "kernel-helper-based"

deny_tcp_with_icmp

string

Enable/disable denying TCP by sending an ICMP communication prohibited packet.

Choices:

  • "enable"

  • "disable"

device

string

Interface to use for management access for NAT mode. Source system.interface.name.

dhcp6_server_ip

list / elements=string

DHCPv6 server IPv6 address.

dhcp_proxy

string

Enable/disable the DHCP Proxy.

Choices:

  • "enable"

  • "disable"

dhcp_proxy_interface

string

Specify outgoing interface to reach server. Source system.interface.name.

dhcp_proxy_interface_select_method

string

Specify how to select outgoing interface to reach server.

Choices:

  • "auto"

  • "sdwan"

  • "specify"

dhcp_server_ip

list / elements=string

DHCP Server IPv4 address.

discovered_device_timeout

integer

Timeout for discovered devices (1 - 365 days).

dyn_addr_session_check

string

Enable/disable dirty session check caused by dynamic address updates.

Choices:

  • "enable"

  • "disable"

ecmp_max_paths

integer

Maximum number of Equal Cost Multi-Path (ECMP) next-hops. Set to 1 to disable ECMP routing (1 - 255).

email_portal_check_dns

string

Enable/disable using DNS to validate email addresses collected by a captive portal.

Choices:

  • "disable"

  • "enable"

ext_resource_session_check

string

Enable/disable dirty session check caused by external resource updates.

Choices:

  • "enable"

  • "disable"

firewall_session_dirty

string

Select how to manage sessions affected by firewall policy configuration changes.

Choices:

  • "check-all"

  • "check-new"

  • "check-policy-option"

fqdn_session_check

string

Enable/disable dirty session check caused by FQDN updates.

Choices:

  • "enable"

  • "disable"

fw_session_hairpin

string

Enable/disable checking for a matching policy each time hairpin traffic goes through the FortiGate.

Choices:

  • "enable"

  • "disable"

gateway

string

Transparent mode IPv4 default gateway IP address.

gateway6

string

Transparent mode IPv4 default gateway IP address.

gtp_asym_fgsp

string

Enable/disable GTP asymmetric traffic handling on FGSP.

Choices:

  • "disable"

  • "enable"

gtp_monitor_mode

string

Enable/disable GTP monitor mode (VDOM level).

Choices:

  • "enable"

  • "disable"

gui_advanced_policy

string

Enable/disable advanced policy configuration on the GUI.

Choices:

  • "enable"

  • "disable"

gui_advanced_wireless_features

string

Enable/disable advanced wireless features in GUI.

Choices:

  • "enable"

  • "disable"

gui_allow_unnamed_policy

string

Enable/disable the requirement for policy naming on the GUI.

Choices:

  • "enable"

  • "disable"

gui_antivirus

string

Enable/disable AntiVirus on the GUI.

Choices:

  • "enable"

  • "disable"

gui_ap_profile

string

Enable/disable FortiAP profiles on the GUI.

Choices:

  • "enable"

  • "disable"

gui_application_control

string

Enable/disable application control on the GUI.

Choices:

  • "enable"

  • "disable"

gui_default_policy_columns

list / elements=dictionary

Default columns to display for policy lists on GUI.

name

string

Select column name.

gui_dhcp_advanced

string

Enable/disable advanced DHCP options on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dlp

string

Enable/disable DLP on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dns_database

string

Enable/disable DNS database settings on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dnsfilter

string

Enable/disable DNS Filtering on the GUI.

Choices:

  • "enable"

  • "disable"

gui_domain_ip_reputation

string

Enable/disable Domain and IP Reputation on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dos_policy

string

Enable/disable DoS policies on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dynamic_profile_display

string

Enable/disable RADIUS Single Sign On (RSSO) on the GUI.

Choices:

  • "enable"

  • "disable"

gui_dynamic_routing

string

Enable/disable dynamic routing on the GUI.

Choices:

  • "enable"

  • "disable"

gui_email_collection

string

Enable/disable email collection on the GUI.

Choices:

  • "enable"

  • "disable"

gui_endpoint_control

string

Enable/disable endpoint control on the GUI.

Choices:

  • "enable"

  • "disable"

gui_endpoint_control_advanced

string

Enable/disable advanced endpoint control options on the GUI.

Choices:

  • "enable"

  • "disable"

gui_enforce_change_summary

string

Enforce change summaries for select tables in the GUI.

Choices:

  • "disable"

  • "require"

  • "optional"

gui_explicit_proxy

string

Enable/disable the explicit proxy on the GUI.

Choices:

  • "enable"

  • "disable"

gui_file_filter

string

Enable/disable File-filter on the GUI.

Choices:

  • "enable"

  • "disable"

gui_fortiap_split_tunneling

string

Enable/disable FortiAP split tunneling on the GUI.

Choices:

  • "enable"

  • "disable"

gui_fortiextender_controller

string

Enable/disable FortiExtender on the GUI.

Choices:

  • "enable"

  • "disable"

gui_icap

string

Enable/disable ICAP on the GUI.

Choices:

  • "enable"

  • "disable"

gui_implicit_policy

string

Enable/disable implicit firewall policies on the GUI.

Choices:

  • "enable"

  • "disable"

gui_ips

string

Enable/disable IPS on the GUI.

Choices:

  • "enable"

  • "disable"

gui_load_balance

string

Enable/disable server load balancing on the GUI.

Choices:

  • "enable"

  • "disable"

gui_local_in_policy

string

Enable/disable Local-In policies on the GUI.

Choices:

  • "enable"

  • "disable"

gui_local_reports

string

Enable/disable local reports on the GUI.

Choices:

  • "enable"

  • "disable"

gui_multicast_policy

string

Enable/disable multicast firewall policies on the GUI.

Choices:

  • "enable"

  • "disable"

gui_multiple_interface_policy

string

Enable/disable adding multiple interfaces to a policy on the GUI.

Choices:

  • "enable"

  • "disable"

gui_multiple_utm_profiles

string

Enable/disable multiple UTM profiles on the GUI.

Choices:

  • "enable"

  • "disable"

gui_nat46_64

string

Enable/disable NAT46 and NAT64 settings on the GUI.

Choices:

  • "enable"

  • "disable"

gui_object_colors

string

Enable/disable object colors on the GUI.

Choices:

  • "enable"

  • "disable"

gui_ot

string

Enable/disable Operational technology features on the GUI.

Choices:

  • "enable"

  • "disable"

gui_per_policy_disclaimer

string

Enable/disable policy disclaimer on the GUI.

Choices:

  • "enable"

  • "disable"

gui_policy_based_ipsec

string

Enable/disable policy-based IPsec VPN on the GUI.

Choices:

  • "enable"

  • "disable"

gui_policy_disclaimer

string

Enable/disable policy disclaimer on the GUI.

Choices:

  • "enable"

  • "disable"

gui_policy_learning

string

Enable/disable firewall policy learning mode on the GUI.

Choices:

  • "enable"

  • "disable"

gui_replacement_message_groups

string

Enable/disable replacement message groups on the GUI.

Choices:

  • "enable"

  • "disable"

gui_security_profile_group

string

Enable/disable Security Profile Groups on the GUI.

Choices:

  • "enable"

  • "disable"

gui_spamfilter

string

Enable/disable Antispam on the GUI.

Choices:

  • "enable"

  • "disable"

gui_sslvpn_personal_bookmarks

string

Enable/disable SSL-VPN personal bookmark management on the GUI.

Choices:

  • "enable"

  • "disable"

gui_sslvpn_realms

string

Enable/disable SSL-VPN realms on the GUI.

Choices:

  • "enable"

  • "disable"

gui_switch_controller

string

Enable/disable the switch controller on the GUI.

Choices:

  • "enable"

  • "disable"

gui_threat_weight

string

Enable/disable threat weight on the GUI.

Choices:

  • "enable"

  • "disable"

gui_traffic_shaping

string

Enable/disable traffic shaping on the GUI.

Choices:

  • "enable"

  • "disable"

gui_videofilter

string

Enable/disable Video filtering on the GUI.

Choices:

  • "enable"

  • "disable"

gui_voip_profile

string

Enable/disable VoIP profiles on the GUI.

Choices:

  • "enable"

  • "disable"

gui_vpn

string

Enable/disable VPN tunnels on the GUI.

Choices:

  • "enable"

  • "disable"

gui_waf_profile

string

Enable/disable Web Application Firewall on the GUI.

Choices:

  • "enable"

  • "disable"

gui_wan_load_balancing

string

Enable/disable SD-WAN on the GUI.

Choices:

  • "enable"

  • "disable"

gui_wanopt_cache

string

Enable/disable WAN Optimization and Web Caching on the GUI.

Choices:

  • "enable"

  • "disable"

gui_webfilter

string

Enable/disable Web filtering on the GUI.

Choices:

  • "enable"

  • "disable"

gui_webfilter_advanced

string

Enable/disable advanced web filtering on the GUI.

Choices:

  • "enable"

  • "disable"

gui_wireless_controller

string

Enable/disable the wireless controller on the GUI.

Choices:

  • "enable"

  • "disable"

gui_ztna

string

Enable/disable Zero Trust Network Access features on the GUI.

Choices:

  • "enable"

  • "disable"

h323_direct_model

string

Enable/disable H323 direct model.

Choices:

  • "disable"

  • "enable"

http_external_dest

string

Offload HTTP traffic to FortiWeb or FortiCache.

Choices:

  • "fortiweb"

  • "forticache"

ike_dn_format

string

Configure IKE ASN.1 Distinguished Name format conventions.

Choices:

  • "with-space"

  • "no-space"

ike_policy_route

string

Enable/disable IKE Policy Based Routing (PBR).

Choices:

  • "enable"

  • "disable"

ike_port

integer

UDP port for IKE/IPsec traffic .

ike_quick_crash_detect

string

Enable/disable IKE quick crash detection (RFC 6290).

Choices:

  • "enable"

  • "disable"

ike_session_resume

string

Enable/disable IKEv2 session resumption (RFC 5723).

Choices:

  • "enable"

  • "disable"

implicit_allow_dns

string

Enable/disable implicitly allowing DNS traffic.

Choices:

  • "enable"

  • "disable"

inspection_mode

string

Inspection mode (proxy-based or flow-based).

Choices:

  • "proxy"

  • "flow"

ip

string

IP address and netmask.

ip6

string

IPv6 address prefix for NAT mode.

lan_extension_controller_addr

string

Controller IP address or FQDN to connect.

string

Enable/disable link down access traffic.

Choices:

  • "enable"

  • "disable"

lldp_reception

string

Enable/disable Link Layer Discovery Protocol (LLDP) reception for this VDOM or apply global settings to this VDOM.

Choices:

  • "enable"

  • "disable"

  • "global"

lldp_transmission

string

Enable/disable Link Layer Discovery Protocol (LLDP) transmission for this VDOM or apply global settings to this VDOM.

Choices:

  • "enable"

  • "disable"

  • "global"

location_id

string

Local location ID in the form of an IPv4 address.

mac_ttl

integer

Duration of MAC addresses in Transparent mode (300 - 8640000 sec).

manageip

string

Transparent mode IPv4 management IP address and netmask.

manageip6

string

Transparent mode IPv6 management IP address and netmask.

multicast_forward

string

Enable/disable multicast forwarding.

Choices:

  • "enable"

  • "disable"

multicast_skip_policy

string

Enable/disable allowing multicast traffic through the FortiGate without a policy check.

Choices:

  • "enable"

  • "disable"

multicast_ttl_notchange

string

Enable/disable preventing the FortiGate from changing the TTL for forwarded multicast packets.

Choices:

  • "enable"

  • "disable"

nat46_force_ipv4_packet_forwarding

string

Enable/disable mandatory IPv4 packet forwarding in NAT46.

Choices:

  • "enable"

  • "disable"

nat46_generate_ipv6_fragment_header

string

Enable/disable NAT46 IPv6 fragment header generation.

Choices:

  • "enable"

  • "disable"

nat64_force_ipv6_packet_forwarding

string

Enable/disable mandatory IPv6 packet forwarding in NAT64.

Choices:

  • "enable"

  • "disable"

ngfw_mode

string

Next Generation Firewall (NGFW) mode.

Choices:

  • "profile-based"

  • "policy-based"

opmode

string

Firewall operation mode (NAT or Transparent).

Choices:

  • "nat"

  • "transparent"

pfcp_monitor_mode

string

Enable/disable PFCP monitor mode (VDOM level).

Choices:

  • "enable"

  • "disable"

prp_trailer_action

string

Enable/disable action to take on PRP trailer.

Choices:

  • "enable"

  • "disable"

sccp_port

integer

TCP port the SCCP proxy monitors for SCCP traffic (0 - 65535).

sctp_session_without_init

string

Enable/disable SCTP session creation without SCTP INIT.

Choices:

  • "enable"

  • "disable"

ses_denied_traffic

string

Enable/disable including denied session in the session table.

Choices:

  • "enable"

  • "disable"

sip_expectation

string

Enable/disable the SIP kernel session helper to create an expectation for port 5060.

Choices:

  • "enable"

  • "disable"

sip_helper

string

Enable/disable the SIP session helper to process SIP sessions unless SIP sessions are accepted by the SIP application layer gateway (ALG).

Choices:

  • "enable"

  • "disable"

sip_nat_trace

string

Enable/disable recording the original SIP source IP address when NAT is used.

Choices:

  • "enable"

  • "disable"

sip_ssl_port

integer

TCP port the SIP proxy monitors for SIP SSL/TLS traffic (0 - 65535).

sip_tcp_port

list / elements=integer

TCP port the SIP proxy monitors for SIP traffic (0 - 65535).

sip_udp_port

list / elements=integer

UDP port the SIP proxy monitors for SIP traffic (0 - 65535).

snat_hairpin_traffic

string

Enable/disable source NAT (SNAT) for hairpin traffic.

Choices:

  • "enable"

  • "disable"

ssl_ssh_profile

string

Profile for SSL/SSH inspection. Source firewall.ssl-ssh-profile.name.

status

string

Enable/disable this VDOM.

Choices:

  • "enable"

  • "disable"

strict_src_check

string

Enable/disable strict source verification.

Choices:

  • "enable"

  • "disable"

tcp_session_without_syn

string

Enable/disable allowing TCP session without SYN flags.

Choices:

  • "enable"

  • "disable"

utf8_spam_tagging

string

Enable/disable converting antispam tags to UTF-8 for better non-ASCII character support.

Choices:

  • "enable"

  • "disable"

v4_ecmp_mode

string

IPv4 Equal-cost multi-path (ECMP) routing and load balancing mode.

Choices:

  • "source-ip-based"

  • "weight-based"

  • "usage-based"

  • "source-dest-ip-based"

vdom_type

string

Vdom type (traffic, lan-extension or admin).

Choices:

  • "traffic"

  • "lan-extension"

  • "admin"

vpn_stats_log

list / elements=string

Enable/disable periodic VPN log statistics for one or more types of VPN. Separate names with a space.

Choices:

  • "ipsec"

  • "pptp"

  • "l2tp"

  • "ssl"

vpn_stats_period

integer

Period to send VPN log statistics (0 or 60 - 86400 sec).

wccp_cache_engine

string

Enable/disable WCCP cache engine.

Choices:

  • "enable"

  • "disable"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure VDOM settings.
    fortios_system_settings:
      vdom:  "{{ vdom }}"
      system_settings:
        allow_linkdown_path: "enable"
        allow_subnet_overlap: "enable"
        application_bandwidth_tracking: "disable"
        asymroute: "enable"
        asymroute_icmp: "enable"
        asymroute6: "enable"
        asymroute6_icmp: "enable"
        auxiliary_session: "enable"
        bfd: "enable"
        bfd_desired_min_tx: "250"
        bfd_detect_mult: "3"
        bfd_dont_enforce_src_port: "enable"
        bfd_required_min_rx: "250"
        block_land_attack: "disable"
        central_nat: "enable"
        comments: "<your_own_value>"
        compliance_check: "enable"
        consolidated_firewall_mode: "enable"
        default_app_port_as_service: "enable"
        default_policy_expiry_days: "30"
        default_voip_alg_mode: "proxy-based"
        deny_tcp_with_icmp: "enable"
        device: "<your_own_value> (source system.interface.name)"
        dhcp_proxy: "enable"
        dhcp_proxy_interface: "<your_own_value> (source system.interface.name)"
        dhcp_proxy_interface_select_method: "auto"
        dhcp_server_ip: "<your_own_value>"
        dhcp6_server_ip: "<your_own_value>"
        discovered_device_timeout: "28"
        dyn_addr_session_check: "enable"
        ecmp_max_paths: "255"
        email_portal_check_dns: "disable"
        ext_resource_session_check: "enable"
        firewall_session_dirty: "check-all"
        fqdn_session_check: "enable"
        fw_session_hairpin: "enable"
        gateway: "<your_own_value>"
        gateway6: "<your_own_value>"
        gtp_asym_fgsp: "disable"
        gtp_monitor_mode: "enable"
        gui_advanced_policy: "enable"
        gui_advanced_wireless_features: "enable"
        gui_allow_unnamed_policy: "enable"
        gui_antivirus: "enable"
        gui_ap_profile: "enable"
        gui_application_control: "enable"
        gui_default_policy_columns:
         -
            name: "default_name_50"
        gui_dhcp_advanced: "enable"
        gui_dlp: "enable"
        gui_dns_database: "enable"
        gui_dnsfilter: "enable"
        gui_domain_ip_reputation: "enable"
        gui_dos_policy: "enable"
        gui_dynamic_profile_display: "enable"
        gui_dynamic_routing: "enable"
        gui_email_collection: "enable"
        gui_endpoint_control: "enable"
        gui_endpoint_control_advanced: "enable"
        gui_enforce_change_summary: "disable"
        gui_explicit_proxy: "enable"
        gui_file_filter: "enable"
        gui_fortiap_split_tunneling: "enable"
        gui_fortiextender_controller: "enable"
        gui_icap: "enable"
        gui_implicit_policy: "enable"
        gui_ips: "enable"
        gui_load_balance: "enable"
        gui_local_in_policy: "enable"
        gui_local_reports: "enable"
        gui_multicast_policy: "enable"
        gui_multiple_interface_policy: "enable"
        gui_multiple_utm_profiles: "enable"
        gui_nat46_64: "enable"
        gui_object_colors: "enable"
        gui_ot: "enable"
        gui_per_policy_disclaimer: "enable"
        gui_policy_based_ipsec: "enable"
        gui_policy_disclaimer: "enable"
        gui_policy_learning: "enable"
        gui_replacement_message_groups: "enable"
        gui_security_profile_group: "enable"
        gui_spamfilter: "enable"
        gui_sslvpn_personal_bookmarks: "enable"
        gui_sslvpn_realms: "enable"
        gui_switch_controller: "enable"
        gui_threat_weight: "enable"
        gui_traffic_shaping: "enable"
        gui_videofilter: "enable"
        gui_voip_profile: "enable"
        gui_vpn: "enable"
        gui_waf_profile: "enable"
        gui_wan_load_balancing: "enable"
        gui_wanopt_cache: "enable"
        gui_webfilter: "enable"
        gui_webfilter_advanced: "enable"
        gui_wireless_controller: "enable"
        gui_ztna: "enable"
        h323_direct_model: "disable"
        http_external_dest: "fortiweb"
        ike_dn_format: "with-space"
        ike_policy_route: "enable"
        ike_port: "500"
        ike_quick_crash_detect: "enable"
        ike_session_resume: "enable"
        implicit_allow_dns: "enable"
        inspection_mode: "proxy"
        ip: "<your_own_value>"
        ip6: "<your_own_value>"
        lan_extension_controller_addr: "<your_own_value>"
        link_down_access: "enable"
        lldp_reception: "enable"
        lldp_transmission: "enable"
        location_id: "<your_own_value>"
        mac_ttl: "300"
        manageip: "<your_own_value>"
        manageip6: "<your_own_value>"
        multicast_forward: "enable"
        multicast_skip_policy: "enable"
        multicast_ttl_notchange: "enable"
        nat46_force_ipv4_packet_forwarding: "enable"
        nat46_generate_ipv6_fragment_header: "enable"
        nat64_force_ipv6_packet_forwarding: "enable"
        ngfw_mode: "profile-based"
        opmode: "nat"
        pfcp_monitor_mode: "enable"
        prp_trailer_action: "enable"
        sccp_port: "2000"
        sctp_session_without_init: "enable"
        ses_denied_traffic: "enable"
        sip_expectation: "enable"
        sip_helper: "enable"
        sip_nat_trace: "enable"
        sip_ssl_port: "5061"
        sip_tcp_port: "<your_own_value>"
        sip_udp_port: "<your_own_value>"
        snat_hairpin_traffic: "enable"
        ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        strict_src_check: "enable"
        tcp_session_without_syn: "enable"
        utf8_spam_tagging: "enable"
        v4_ecmp_mode: "source-ip-based"
        vdom_type: "traffic"
        vpn_stats_log: "ipsec"
        vpn_stats_period: "600"
        wccp_cache_engine: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)