You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

junipernetworks.junos.junos_vlans module – VLANs resource module

Note

This module is part of the junipernetworks.junos collection (version 3.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_vlans.

New in junipernetworks.junos 1.0.0

Synopsis 

This module creates and manages VLAN configurations on Junos OS.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ncclient (>=v0.6.4)

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of Vlan options
description string	Text description of VLANs
l3_interface string	Name of logical layer 3 interface.
name string / required	Name of VLAN.
vlan_id integer	IEEE 802.1q VLAN identifier for VLAN (1..4094).
running_config string	This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show vlans. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result
state string	The state of the configuration after module completion. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"` `"gathered"` `"parsed"` `"rendered"`

Notes 

Note

This module requires the netconf system service be enabled on the remote device being managed
Tested against Junos OS 18.4R1
This module works with connection netconf.
See the Junos OS Platform Options.

Examples 

# Using merged
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
#
# [edit]

- name: Merge provided Junos vlans config with running-config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 1
    - name: vlan2
      vlan_id: 2
      l3_interface: irb.12
    state: merged
#
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "before": [],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id></nc:vlan>"
#         "<nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id><nc:l3-interface>irb.12</nc:l3-interface>"
#         "</nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 1;
# }
# vlan2 {
#     vlan-id 2;
#     l3-interface irb.12;
# }

# Using replaced
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 1;
# }
# vlan2 {
#     vlan-id 2;
#     l3-interface irb.12;
# }

- name: Replace Junos vlans running-config with the provided config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 11
      l3_interface: irb.10

    - name: vlan2
      vlan_id: 2
    state: replaced
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "before": [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan delete="delete"><nc:name>vlan1</nc:name></nc:vlan>"
#         "<nc:vlan delete="delete"><nc:name>vlan2</nc:name></nc:vlan>"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>11</nc:vlan-id>"
#         "<nc:l3-interface>irb.10</nc:l3-interface></nc:vlan><nc:vlan>"
#         "<nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }
#
# Using overridden
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }
- name: Override Junos running-config with provided config
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan3
      vlan_id: 3
      l3_interface: irb.13
    state: overridden
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [
#         {
#             "l3_interface": "irb.13",
#             "name": "vlan3",
#             "vlan_id": 3
#         }
#     ],
#     "before": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan delete="delete"><nc:name>vlan1</nc:name></nc:vlan><nc:vlan delete="delete">"
#         "<nc:name>vlan2</nc:name></nc:vlan><nc:vlan><nc:name>vlan3</nc:name><nc:vlan-id>3</nc:vlan-id>"
#         "<nc:l3-interface>irb.13</nc:l3-interface></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan3 {
#     vlan-id 3;
#     l3-interface irb.13;
# }
#
# Using deleted
#
# Before state
# ------------
#
# vagrant@vsrx# show vlans
# vlan3 {
#     vlan-id 3;
#     l3-interface irb.13;
# }
- name: Delete specific vlan
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan3
    state: deleted
# -------------------------
# Module Execution Result
# -------------------------
#     "after": [],
#     "changed": true,
#     "commands": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#         "<nc:vlan delete="delete"><nc:name>vlan3</nc:name></nc:vlan></nc:vlans>"
#     ]
# After state
# -----------
#
# vagrant@vsrx# show vlans
# vlan1 {
#     vlan-id 11;
#     l3-interface irb.10;
# }
# vlan2 {
#     vlan-id 2;
# }


- name: Gather running vlans configuration
  junipernetworks.junos.junos_vlans:
    state: gathered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "gathered": [
#         {
#             "l3_interface": "irb.10",
#             "name": "vlan1",
#             "vlan_id": 11
#         },
#         {
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ],
#     "changed": false,
#
# Using rendered
#
# Before state
# ------------
#
- name: Render xml for provided facts.
  junipernetworks.junos.junos_vlans:
    config:
    - name: vlan1
      vlan_id: 1

    - name: vlan2
      vlan_id: 2
      l3_interface: irb.12
    state: rendered
#
# -------------------------
# Module Execution Result
# -------------------------
#     "rendered": [
#         "<nc:vlans xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">"
#         "<nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id></nc:vlan>"
#         "<nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id><nc:l3-interface>irb.12</nc:l3-interface>"
#         "</nc:vlan></nc:vlans>"
#     ]
# Using parsed
# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <vlans>
#           <vlan>
#             <name>vlan1</name>
#             <vlan-id>1</vlan-id>
#           </vlan>
#           <vlan>
#             <name>vlan2</name>
#             <vlan-id>2</vlan-id>
#             <l3-interface>irb.12</l3-interface>
#           </vlan>
#        </vlans>
#     </configuration>
# </rpc-reply>

- name: Parse routing instance running config
  junipernetworks.junos.junos_vlans:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed":  [
#         {
#             "name": "vlan1",
#             "vlan_id": 1
#         },
#         {
#             "l3_interface": "irb.12",
#             "name": "vlan2",
#             "vlan_id": 2
#         }
#     ]
#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The configuration as structured data after module completion. Returned: when changed Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
before list / elements=string	The configuration as structured data prior to module invocation. Returned: always Sample: `["The configuration returned will always be in the same format\n of the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["<nc:vlans xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"> <nc:vlan><nc:name>vlan1</nc:name><nc:vlan-id>1</nc:vlan-id> </nc:vlan><nc:vlan><nc:name>vlan2</nc:name><nc:vlan-id>2</nc:vlan-id> <nc:l3-interface>irb.12</nc:l3-interface></nc:vlan></nc:vlans>", "xml 2", "xml 3"]`

Authors

Daniel Mellado (@dmellado)

Collection links

Issue Tracker Repository (Sources)

junipernetworks.junos.junos_vlans module – VLANs resource module

Synopsis

Requirements

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

Examples 

Return Values 