cisco.ios.ios_ospfv3 module – Resource module to configure OSPFv3.

Note

This module is part of the cisco.ios collection (version 4.6.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospfv3.

New in cisco.ios 1.1.0

Synopsis

  • This module configures and manages the Open Shortest Path First (OSPF) version 3 on IOS platforms.

Parameters

Parameter

Comments

config

dictionary

A list of configurations for ospfv3.

processes

list / elements=dictionary

List of OSPF instance configurations.

address_family

list / elements=dictionary

Enter Address Family command mode

adjacency

dictionary

Control adjacency formation

disable

boolean

Disable adjacency staggering

Choices:

  • false

  • true

max_adjacency

integer

Maximum number of adjacencies allowed to be forming

Please refer vendor documentation for valid values

min_adjacency

integer

Initial number of adjacencies allowed to be forming in an area

Please refer vendor documentation for valid values

none

boolean

No initial

Choices:

  • false

  • true

afi

string

Enter Address Family command mode

Choices:

  • "ipv4"

  • "ipv6"

areas

list / elements=dictionary

OSPF area parameters

area_id

string

OSPF area ID as a decimal value. Please refer vendor documentation of Valid values.

OSPF area ID in IP address format(e.g. A.B.C.D)

authentication

dictionary

Authentication parameters

key_chain

string

Use a key-chain for cryptographic authentication keys

null

boolean

Use no authentication

Choices:

  • false

  • true

default_cost

integer

Set the summary default-cost of a NSSA/stub area

Stub’s advertised external route metric

Note, please refer vendor documentation for respective valid values

filter_list

list / elements=dictionary

Filter networks between OSPFv3 areas

direction

string / required

The direction to apply on the filter networks sent to and from this area.

Choices:

  • "in"

  • "out"

name

string

Name of an IP prefix-list

normal

boolean

Specify a normal area type

Choices:

  • false

  • true

nssa

dictionary

Specify a NSSA area

default_information_originate

dictionary

Originate Type 7 default into NSSA area

metric

integer

OSPF default metric

metric_type

integer

OSPF metric type for default routes

OSPF Link State type

Choices:

  • 1

  • 2

nssa_only

boolean

Limit default advertisement to this NSSA area

Choices:

  • false

  • true

no_redistribution

boolean

No redistribution into this NSSA area

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSA into NSSA

Choices:

  • false

  • true

set

boolean

Enable a NSSA area

Choices:

  • false

  • true

translate

string

Translate LSA

Always translate LSAs on this ABR

Suppress forwarding address in translated LSAs

Choices:

  • "always"

  • "suppress-fa"

ranges

list / elements=dictionary

Summarize routes matching address/mask (border routers only)

address

string

IP address to match

advertise

boolean

Advertise this range (default)

Since, advertise when enabled is not shown in running-config idempotency won’t be maintained for the play in the second or next run of the play.

Choices:

  • false

  • true

cost

integer

User specified metric for this range

netmask

string

IP mask for address

not_advertise

boolean

DoNotAdvertise this range

Choices:

  • false

  • true

dictionary

Define a sham link and its parameters

dictionary

Authentication parameters

string

Use a key-chain for cryptographic authentication keys

boolean

Use no authentication

Choices:

  • false

  • true

integer

Associate a cost with the sham-link

Cost of the sham-link

string

IPv6 address associated with sham-link destination (X:X:X:X::X)

string

IPv6 address associated with sham-link source (X:X:X:X::X)

integer

TTL security check

maximum number of hops allowed

stub

dictionary

Specify a stub area

Backbone can not be configured as stub area

no_summary

boolean

Do not send summary LSA into stub area

Choices:

  • false

  • true

set

boolean

Enable a stub area

Choices:

  • false

  • true

authentication

dictionary

Authentication parameters

Authentication operation mode

deployment

boolean

Deployment mode of operation

Choices:

  • false

  • true

normal

boolean

Normal mode of operation

Choices:

  • false

  • true

auto_cost

dictionary

Calculate OSPF interface cost according to bandwidth

reference_bandwidth

integer

Use reference bandwidth method to assign OSPF cost

Note, refer vendor documentation for respective valid values

set

boolean

Enable OSPF auto-cost

Choices:

  • false

  • true

bfd

dictionary

BFD configuration commands

all_interfaces

boolean

Enable BFD on all interfaces

Choices:

  • false

  • true

disable

boolean

Disable BFD on all interfaces

Choices:

  • false

  • true

capability

boolean

Enable a specific feature

Do not perform PE specific checks

Choices:

  • false

  • true

compatible

dictionary

OSPFv3 router compatibility list

rfc1583

boolean

compatible with RFC 1583

Choices:

  • false

  • true

rfc1587

boolean

compatible with RFC 1587

Choices:

  • false

  • true

rfc5243

boolean

supports DBD exchange optimization

Choices:

  • false

  • true

default_information

dictionary

Control distribution of default information

always

boolean

Always advertise default route

Choices:

  • false

  • true

metric

integer

OSPF default metric

Note, refer vendor documentation for respective valid values

metric_type

integer

OSPF metric type for default routes

Note, please refer vendor documentation for respective valid range

originate

boolean

Distribute a default route

Choices:

  • false

  • true

route_map

string

Route-map reference name

default_metric

integer

Set metric of redistributed routes

discard_route

dictionary

Enable or disable discard-route installation

external

boolean

Discard route for summarised redistributed routes

Choices:

  • false

  • true

internal

boolean

Discard route for summarised inter-area routes

Choices:

  • false

  • true

boolean

Discard route for sham-link routes

Choices:

  • false

  • true

distance

integer

Define an administrative distance

Note, please refer vendor documentation for respective valid range

distribute_list

dictionary

Filter networks in routing updates

acls

list / elements=dictionary

IP access list

direction

string / required

Filter incoming and outgoing routing updates.

Choices:

  • "in"

  • "out"

interface

string

Interface configuration (GigabitEthernet A/B)

Valid with incoming traffic

name

string / required

IP access list name/number

protocol

string

Protocol config (bgp 1).

Valid with outgoing traffic

prefix

dictionary

Filter prefixes in routing updates

direction

string / required

Filter incoming and outgoing routing updates.

Choices:

  • "in"

  • "out"

gateway_name

string

Gateway name for filtering incoming updates based on gateway

interface

string

Interface configuration (GigabitEthernet A/B)

Valid with incoming traffic

name

string / required

Name of an IP prefix-list

protocol

string

Protocol config (bgp 1).

Valid with outgoing traffic

route_map

dictionary

Filter prefixes in routing updates

name

string / required

Route-map name

event_log

dictionary

Event Logging

enable

boolean

Enable event Logging

Choices:

  • false

  • true

one_shot

boolean

Disable Logging When Log Buffer Becomes Full

Choices:

  • false

  • true

pause

boolean

Pause Event Logging

Choices:

  • false

  • true

size

integer

Maximum Number of Events Stored in the Event Log

Note, refer vendor documentation for respective valid values

graceful_restart

dictionary

Graceful-restart options

helper support

disable

boolean

disable helper support

Choices:

  • false

  • true

enable

boolean

helper support enabled

Choices:

  • false

  • true

strict_lsa_checking

boolean

enable helper strict LSA checking

Choices:

  • false

  • true

interface_id

dictionary

Source of the interface ID

ios_if_index

boolean

IOS interface number

Choices:

  • false

  • true

snmp_if_index

boolean

SNMP MIB ifIndex

Choices:

  • false

  • true

limit

dictionary

Limit a specific OSPF feature

dc

dictionary

Demand circuit retransmissions

disable

boolean

Disble the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

non_dc

dictionary

Non-demand-circuit retransmissions

disable

boolean

Disble the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

local_rib_criteria

dictionary

Enable or disable usage of local RIB as route criteria

enable

boolean

Enable usage of local RIB as route criteria

Choices:

  • false

  • true

forwarding_address

boolean

Local RIB used to validate external/NSSA forwarding addresses

Choices:

  • false

  • true

inter_area_summary

boolean

Local RIB used as criteria for inter-area summaries

Choices:

  • false

  • true

nssa_translation

boolean

Local RIB used as criteria for NSSA translation

Choices:

  • false

  • true

log_adjacency_changes

dictionary

Log changes in adjacency state

detail

boolean

Log all state changes

Choices:

  • false

  • true

set

boolean

Log changes in adjacency state

Choices:

  • false

  • true

manet

dictionary

Specify MANET OSPF parameters

cache

dictionary

Specify MANET cache sizes

acknowledgement

integer

Specify MANET acknowledgement cache size

Maximum number of acknowledgements in cache

update

integer

Specify MANET LSA cache size

Maximum number of LSAs in cache

hello

dictionary

Unicast Hellos rather than multicast

multicast

boolean

Multicast Hello requests and responses rather than unicast

Choices:

  • false

  • true

unicast

boolean

Unicast Hello requests and responses rather than multicast

Choices:

  • false

  • true

peering

dictionary

MANET OSPF Smart Peering

disable

boolean

Disable selective peering

Choices:

  • false

  • true

per_interface

boolean

Select peers per interface rather than per node

Choices:

  • false

  • true

redundancy

integer

Redundant paths

Number of redundant OSPF paths

set

boolean

Enable selective peering

Choices:

  • false

  • true

willingness

integer

Specify and Relay willingness value

max_lsa

dictionary

Maximum number of non self-generated LSAs to accept

ignore_count

integer

Maximum number of times adjacencies can be suppressed

Note, refer vendor documentation for respective valid values

ignore_time

integer

Number of minutes during which all adjacencies are suppressed

Note, refer vendor documentation for respective valid values

number

integer

Maximum number of non self-generated LSAs to accept

Note, refer vendor documentation for respective valid values

reset_time

integer

Number of minutes after which ignore-count is reset to zero

Note, refer vendor documentation for respective valid values

threshold_value

integer

Threshold value (%) at which to generate a warning msg

Note, refer vendor documentation for respective valid values

warning_only

boolean

Only give a warning message when limit is exceeded

Choices:

  • false

  • true

max_metric

dictionary

Set maximum metric

Maximum metric in self-originated router-LSAs

disable

boolean

disable maximum metric in self-originated router-LSAs

Choices:

  • false

  • true

external_lsa

integer

Override external-lsa metric with max-metric value

Overriding metric in external-LSAs

Note, refer vendor documentation for respective valid values

inter_area_lsas

integer

Override inter-area-lsas metric with max-metric value

Overriding metric in inter-area-LSAs

Note, refer vendor documentation for respective valid values

on_startup

dictionary

Set maximum metric temporarily after reboot

time

integer

Time, in seconds, router-LSAs are originated with max-metric

Note, please refer vendor documentation for respective valid range

wait_for_bgp

boolean

Let BGP decide when to originate router-LSA with normal metric

Choices:

  • false

  • true

stub_prefix_lsa

boolean

Set maximum metric for stub links in prefix LSAs

Choices:

  • false

  • true

maximum_paths

integer

Forward packets over multiple paths

Number of paths

passive_interface

string

Suppress routing updates on an interface

prefix_suppression

dictionary

Prefix suppression

disable

boolean

Disable prefix suppression

Choices:

  • false

  • true

enable

boolean

Enable prefix suppression

Choices:

  • false

  • true

queue_depth

dictionary

Hello/Router process queue depth

hello

dictionary

OSPF Hello process queue depth

max_packets

integer

maximum number of packets in the queue

unlimited

boolean

Unlimited queue depth

Choices:

  • false

  • true

update

dictionary

OSPF Router process queue depth

max_packets

integer

maximum number of packets in the queue

unlimited

boolean

Unlimited queue depth

Choices:

  • false

  • true

router_id

string

Router-id address for this OSPF process

OSPF router-id in IP address format (A.B.C.D)

shutdown

dictionary

Shutdown the router process

disable

boolean

Disable Shutdown

Choices:

  • false

  • true

enable

boolean

Shutdown the router process

Choices:

  • false

  • true

summary_prefix

dictionary

Configure IP address summaries

address

string

IP summary address (A.B.C.D)

IP prefix <network>/<length> (A.B.C.D/nn)

mask

string

IP Summary mask

not_advertise

boolean

Do not advertise or translate

Choices:

  • false

  • true

nssa_only

boolean

Limit summary to NSSA areas

Choices:

  • false

  • true

tag

integer

Set tag

timers

dictionary

Adjust routing timers

lsa

integer

OSPF LSA timers, arrival timer

The minimum interval in milliseconds between accepting the same LSA

Note, refer vendor documentation for respective valid values

manet

dictionary

OSPF MANET timers

cache

dictionary

Specify MANET cache sizes

acknowledgement

integer

Specify MANET acknowledgement cache size

redundancy

integer

Specify MANET LSA cache size

hello

boolean

Unicast Hellos rather than multicast

Unicast Hello requests and responses rather than multicast

Choices:

  • false

  • true

peering

dictionary

MANET OSPF Smart Peering

per_interface

boolean

Select peers per interface rather than per node

Choices:

  • false

  • true

redundancy

integer

Redundant paths

Number of redundant OSPF paths

set

boolean

Enable selective peering

Choices:

  • false

  • true

willingness

integer

Specify and Relay willingness value

pacing

dictionary

OSPF pacing timers

flood

integer

OSPF flood pacing timer

The minimum interval in msec to pace limit flooding on interface

Note, refer vendor documentation for respective valid values

lsa_group

integer

OSPF LSA group pacing timer

Interval in sec between group of LSA being refreshed or maxaged

Note, refer vendor documentation for respective valid values

retransmission

integer

OSPF retransmission pacing timer

The minimum interval in msec between neighbor retransmissions

Note, refer vendor documentation for respective valid values

throttle

dictionary

OSPF throttle timers

lsa

dictionary

OSPF LSA throttle timers

first_delay

integer

Delay to generate first occurrence of LSA in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

min_delay

integer

Minimum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

spf

dictionary

OSPF SPF throttle timers - Delay between receiving a change to SPF calculation in milliseconds - Note, refer vendor documentation for respective valid values

between_delay

integer

Delay between first and second SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum wait time in milliseconds for SPF calculations

Note, refer vendor documentation for respective valid values

receive_delay

integer

Delay between receiving a change to SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

unicast

boolean

Address Family modifier

Choices:

  • false

  • true

vrf

string

Specify parameters for a VPN Routing/Forwarding instance

adjacency

dictionary

Control adjacency formation

max_adjacency

integer

Maximum number of adjacencies allowed to be forming

Please refer vendor documentation for valid values

min_adjacency

integer

Initial number of adjacencies allowed to be forming in an area

Please refer vendor documentation for valid values

none

boolean

No initial

Choices:

  • false

  • true

areas

list / elements=dictionary

OSPF area parameters

area_id

string

OSPF area ID as a decimal value. Please refer vendor documentation of Valid values.

OSPF area ID in IP address format(e.g. A.B.C.D)

authentication

dictionary

Authentication parameters

ipsec

dictionary

Use IPsec authentication

hex_string

string

SHA-1 key (40 chars)

md5

integer

Use MD5 authentication

sha1

integer

Use SHA-1 authentication

spi

integer

Set the SPI (Security Parameters Index)

key_chain

string

Use a key-chain for cryptographic authentication keys

default_cost

integer

Set the summary default-cost of a NSSA/stub area

Stub’s advertised external route metric

Note, please refer vendor documentation for respective valid values

nssa

dictionary

Specify a NSSA area

default_information_originate

dictionary

Originate Type 7 default into NSSA area

metric

integer

OSPF default metric

metric_type

integer

OSPF metric type for default routes

OSPF Link State type

Choices:

  • 1

  • 2

nssa_only

boolean

Limit default advertisement to this NSSA area

Choices:

  • false

  • true

no_redistribution

boolean

No redistribution into this NSSA area

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSA into NSSA

Choices:

  • false

  • true

set

boolean

Enable a NSSA area

Choices:

  • false

  • true

translate

string

Translate LSA

Always translate LSAs on this ABR

Suppress forwarding address in translated LSAs

Choices:

  • "always"

  • "suppress-fa"

stub

dictionary

Specify a stub area

Backbone can not be configured as stub area

no_summary

boolean

Do not send summary LSA into stub area

Choices:

  • false

  • true

set

boolean

Enable a stub area

Choices:

  • false

  • true

authentication

boolean

Authentication parameter mode

Deployment mode of operation

Choices:

  • false

  • true

auto_cost

dictionary

Calculate OSPF interface cost according to bandwidth

reference_bandwidth

integer

Use reference bandwidth method to assign OSPF cost

Note, refer vendor documentation for respective valid values

set

boolean

Enable OSPF auto-cost

Choices:

  • false

  • true

bfd

boolean

BFD configuration commands

Enable BFD on all interfaces

Choices:

  • false

  • true

compatible

dictionary

OSPFv3 router compatibility list

rfc1583

boolean

compatible with RFC 1583

Choices:

  • false

  • true

rfc1587

boolean

compatible with RFC 1587

Choices:

  • false

  • true

rfc5243

boolean

supports DBD exchange optimization

Choices:

  • false

  • true

event_log

dictionary

Event Logging

enable

boolean

Enable event Logging

Choices:

  • false

  • true

one_shot

boolean

Disable Logging When Log Buffer Becomes Full

Choices:

  • false

  • true

pause

boolean

Pause Event Logging

Choices:

  • false

  • true

size

integer

Maximum Number of Events Stored in the Event Log

Note, refer vendor documentation for respective valid values

graceful_restart

dictionary

Graceful-restart options for helper support

disable

boolean

disable helper support

Choices:

  • false

  • true

strict_lsa_checking

boolean

enable helper strict LSA checking

Choices:

  • false

  • true

help

boolean

Description of the interactive help system

Choices:

  • false

  • true

interface_id

boolean

Source of the interface ID

SNMP MIB ifIndex

Choices:

  • false

  • true

limit

dictionary

Limit a specific OSPF feature and LS update, DBD, and LS request retransmissions

dc

dictionary

Demand circuit retransmissions

disable

boolean

Disable the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

non_dc

dictionary

Non-demand-circuit retransmissions

disable

boolean

Disable the feature

Choices:

  • false

  • true

number

integer

The maximum number of retransmissions

local_rib_criteria

dictionary

Enable or disable usage of local RIB as route criteria

enable

boolean

Enable usage of local RIB as route criteria

Choices:

  • false

  • true

forwarding_address

boolean

Local RIB used to validate external/NSSA forwarding addresses

Choices:

  • false

  • true

inter_area_summary

boolean

Local RIB used as criteria for inter-area summaries

Choices:

  • false

  • true

nssa_translation

boolean

Local RIB used as criteria for NSSA translation

Choices:

  • false

  • true

log_adjacency_changes

dictionary

Log changes in adjacency state

detail

boolean

Log all state changes

Choices:

  • false

  • true

set

boolean

Log changes in adjacency state

Choices:

  • false

  • true

manet

dictionary

Specify MANET OSPF parameters

cache

dictionary

Specify MANET cache sizes

acknowledgement

integer

Specify MANET acknowledgement cache size

redundancy

integer

Specify MANET LSA cache size

hello

boolean

Unicast Hellos rather than multicast

Unicast Hello requests and responses rather than multicast

Choices:

  • false

  • true

peering

dictionary

MANET OSPF Smart Peering

per_interface

boolean

Select peers per interface rather than per node

Choices:

  • false

  • true

redundancy

integer

Redundant paths

Number of redundant OSPF paths

set

boolean

Enable selective peering

Choices:

  • false

  • true

willingness

integer

Specify and Relay willingness value

max_lsa

dictionary

Maximum number of non self-generated LSAs to accept

ignore_count

integer

Maximum number of times adjacencies can be suppressed

Note, refer vendor documentation for respective valid values

ignore_time

integer

Number of minutes during which all adjacencies are suppressed

Note, refer vendor documentation for respective valid values

number

integer

Maximum number of non self-generated LSAs to accept

Note, refer vendor documentation for respective valid values

reset_time

integer

Number of minutes after which ignore-count is reset to zero

Note, refer vendor documentation for respective valid values

threshold_value

integer

Threshold value (%) at which to generate a warning msg

Note, refer vendor documentation for respective valid values

warning_only

boolean

Only give a warning message when limit is exceeded

Choices:

  • false

  • true

max_metric

dictionary

Set maximum metric

external_lsa

integer

Override external-lsa metric with max-metric value

Overriding metric in external-LSAs

Note, refer vendor documentation for respective valid values

include_stub

boolean

Set maximum metric for stub links in router-LSAs

Choices:

  • false

  • true

on_startup

dictionary

Set maximum metric temporarily after reboot

time

integer

Time, in seconds, router-LSAs are originated with max-metric

Note, please refer vendor documentation for respective valid range

wait_for_bgp

boolean

Let BGP decide when to originate router-LSA with normal metric

Choices:

  • false

  • true

router_lsa

boolean / required

Maximum metric in self-originated router-LSAs

Choices:

  • false

  • true

summary_lsa

integer

Override summary-lsa metric with max-metric value

Note, please refer vendor documentation for respective valid range

passive_interface

string

Suppress routing updates on an interface

prefix_suppression

boolean

Enable prefix suppression

Choices:

  • false

  • true

process_id

integer / required

Process ID

queue_depth

dictionary

Hello/Router process queue depth

hello

dictionary

OSPF Hello process queue depth

max_packets

integer

maximum number of packets in the queue

unlimited

boolean

Unlimited queue depth

Choices:

  • false

  • true

router_id

string

Router-id address for this OSPF process

OSPF router-id in IP address format (A.B.C.D)

shutdown

boolean

Shutdown the router process

Choices:

  • false

  • true

timers

dictionary

Adjust routing timers

lsa

integer

OSPF LSA timers, arrival timer

The minimum interval in milliseconds between accepting the same LSA

Note, refer vendor documentation for respective valid values

manet

dictionary

OSPF MANET timers

cache

dictionary

Specify MANET cache sizes

acknowledgement

integer

Specify MANET acknowledgement cache size

redundancy

integer

Specify MANET LSA cache size

hello

boolean

Unicast Hellos rather than multicast

Unicast Hello requests and responses rather than multicast

Choices:

  • false

  • true

peering

dictionary

MANET OSPF Smart Peering

per_interface

boolean

Select peers per interface rather than per node

Choices:

  • false

  • true

redundancy

integer

Redundant paths

Number of redundant OSPF paths

set

boolean

Enable selective peering

Choices:

  • false

  • true

willingness

integer

Specify and Relay willingness value

pacing

dictionary

OSPF pacing timers

flood

integer

OSPF flood pacing timer

The minimum interval in msec to pace limit flooding on interface

Note, refer vendor documentation for respective valid values

lsa_group

integer

OSPF LSA group pacing timer

Interval in sec between group of LSA being refreshed or maxaged

Note, refer vendor documentation for respective valid values

retransmission

integer

OSPF retransmission pacing timer

The minimum interval in msec between neighbor retransmissions

Note, refer vendor documentation for respective valid values

throttle

dictionary

OSPF throttle timers

lsa

dictionary

OSPF LSA throttle timers

first_delay

integer

Delay to generate first occurrence of LSA in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

min_delay

integer

Minimum delay between originating the same LSA in milliseconds

Note, refer vendor documentation for respective valid values

spf

dictionary

OSPF SPF throttle timers - Delay between receiving a change to SPF calculation in milliseconds - Note, refer vendor documentation for respective valid values

between_delay

integer

Delay between first and second SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

max_delay

integer

Maximum wait time in milliseconds for SPF calculations

Note, refer vendor documentation for respective valid values

receive_delay

integer

Delay between receiving a change to SPF calculation in milliseconds

Note, refer vendor documentation for respective valid values

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command sh running-config | section ^router ospfv3.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of command show running-config | include ip route|ipv6 route executed on device. For state parsed active connection to remote host is not required.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

Examples

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Delete provided OSPF V3 processes
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 1
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospfv3 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using deleted without any config passed (NOTE: This will delete all OSPFV3 configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Delete all OSPF processes
  cisco.ios.ios_ospfv3:
    state: deleted

# Commands Fired:
# ---------------
#
# "commands": [
#        "no router ospfv3 200",
#        "no router ospfv3 1"
#    ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router-ios#

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router-ios#

- name: Merge provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          address_family:
            - afi: ipv4
              unicast: true
              vrf: blue
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 25
                  nssa:
                    default_information_originate:
                      metric: 25
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
          timers:
            throttle:
              lsa:
                first_delay: 12
                min_delay: 14
                max_delay: 16
        - process_id: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 200
                max_adjacency: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
    state: merged

# Commands Fired:
# ---------------
#
#  "commands": [
#         "router ospfv3 1",
#         "max-metric router-lsa on-startup 110",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast vrf blue",
#         "adjacency stagger 50 50",
#         "area 25 nssa default-information-originate metric 25 nssa-only",
#         "exit-address-family",
#         "router ospfv3 200",
#         "auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 100",
#         "address-family ipv4 unicast",
#         "adjacency stagger 200 200",
#         "exit-address-family"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using overridden

# Before state:
# -------------
#
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Override provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 200
                  nssa:
                    default_information_originate:
                      metric: 200
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
    state: overridden

# Commands Fired:
# ---------------
#
# "commands": [
#         "no router ospfv3 1",
#         "router ospfv3 200",
#         "no auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 200",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast",
#         "adjacency stagger 50 50",
#         "area 200 nssa default-information-originate metric 200 nssa-only",
#         "exit-address-family"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 200
#  max-metric router-lsa on-startup 200
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast
#   adjacency stagger 50 50
#   area 200 nssa default-information-originate metric 200 nssa-only
#  exit-address-family

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Replaced provided OSPFV3 configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 200
                  nssa:
                    default_information_originate:
                      metric: 200
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
    state: replaced

# Commands Fired:
# ---------------
# "commands": [
#         "router ospfv3 200",
#         "no auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 200",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast",
#         "adjacency stagger 50 50",
#         "area 200 nssa default-information-originate metric 200 nssa-only",
#         "exit-address-family"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 200
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast
#   adjacency stagger 50 50
#   area 200 nssa default-information-originate metric 200 nssa-only
#  exit-address-family

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Gather OSPFV3 provided configurations
  cisco.ios.ios_ospfv3:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 50,
#                             "min_adjacency": 50
#                         },
#                         "afi": "ipv4",
#                         "areas": [
#                             {
#                                 "area_id": "25",
#                                 "nssa": {
#                                     "default_information_originate": {
#                                         "metric": 25,
#                                         "nssa_only": true
#                                     }
#                                 }
#                             }
#                         ],
#                         "unicast": true,
#                         "vrf": "blue"
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             }
#                         }
#                     }
#                 ],
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 1
#             },
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 200,
#                             "min_adjacency": 200
#                         },
#                         "afi": "ipv4",
#                         "unicast": true
#                     }
#                 ],
#                 "auto_cost": {
#                     "reference_bandwidth": 4
#                 },
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 100
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 200
#             }
#         ]
#     }

# After state:
# ------------
#
# router-ios#sh running-config | section ^router ospfv3
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospfv3:
    config:
      processes:
        - process_id: 1
          max_metric:
            router_lsa: true
            on_startup:
              time: 110
          address_family:
            - afi: ipv4
              unicast: true
              vrf: blue
              adjacency:
                min_adjacency: 50
                max_adjacency: 50
              areas:
                - area_id: 25
                  nssa:
                    default_information_originate:
                      metric: 25
                      nssa_only: true
          areas:
            - area_id: "10"
              nssa:
                default_information_originate:
                  metric: 10
          timers:
            throttle:
              lsa:
                first_delay: 12
                min_delay: 14
                max_delay: 16
        - process_id: 200
          address_family:
            - afi: ipv4
              unicast: true
              adjacency:
                min_adjacency: 200
                max_adjacency: 200
          max_metric:
            router_lsa: true
            on_startup:
              time: 100
          auto_cost:
            reference_bandwidth: 4
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "router ospfv3 1",
#         "max-metric router-lsa on-startup 110",
#         "area 10 nssa default-information-originate metric 10",
#         "address-family ipv4 unicast vrf blue",
#         "adjacency stagger 50 50",
#         "area 25 nssa default-information-originate metric 25 nssa-only",
#         "exit-address-family",
#         "router ospfv3 200",
#         "auto-cost reference-bandwidth 4",
#         "max-metric router-lsa on-startup 100",
#         "address-family ipv4 unicast",
#         "adjacency stagger 200 200",
#         "exit-address-family"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# router ospfv3 1
#  max-metric router-lsa on-startup 110
#  area 10 nssa default-information-originate metric 10
#  !
#  address-family ipv4 unicast vrf blue
#   adjacency stagger 50 50
#   area 25 nssa default-information-originate metric 25 nssa-only
#  exit-address-family
# router ospfv3 200
#  max-metric router-lsa on-startup 100
#  auto-cost reference-bandwidth 4
#  !
#  address-family ipv4 unicast
#   adjacency stagger 200 200
#  exit-address-family

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospfv3:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "adjacency": {
#                             "max_adjacency": 50,
#                             "min_adjacency": 50
#                         },
#                         "afi": "ipv4",
#                         "areas": [
#                             {
#                                 "area_id": "25",
#                                 "nssa": {
#                                     "default_information_originate": {
#                                         "metric": 25,
#                                         "nssa_only": true
#                                     }
#                                 }
#                             }
#                         ],
#                         "unicast": true,
#                         "vrf": "blue"
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "10",
#                         "nssa": {
#                             "default_information_originate": {
#                                 "metric": 10
#                             }
#                         }
#                     }
#                 ],
#                 "max_metric": {
#                     "on_startup": {
#                         "time": 110
#                     },
#                     "router_lsa": true
#                 },
#                 "process_id": 1
#             }
#         ]
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["router ospfv3 1", "address-family ipv4 unicast vrf blue", "adjacency stagger 50 50"]

Authors

  • Sumit Jaiswal (@justjais)