cisco.iosxr.iosxr_acl_interfaces module – Resource module to configure ACL interfaces.

Note

This module is part of the cisco.iosxr collection (version 4.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_acl_interfaces.

New in cisco.iosxr 1.0.0

Synopsis

  • This module manages adding and removing Access Control Lists (ACLs) from interfaces on devices running IOS-XR software.

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of ACL options for interfaces.

access_groups

list / elements=dictionary

Specifies ACLs attached to the interfaces.

acls

list / elements=dictionary

Specifies the ACLs for the provided AFI.

direction

string / required

Specifies the direction of packets that the ACL will be applied on.

Choices:

  • "in"

  • "out"

name

string / required

Specifies the name of the IPv4/IPv6 ACL for the interface.

afi

string / required

Specifies the AFI for the ACL(s) to be configured on this interface.

Choices:

  • "ipv4"

  • "ipv6"

name

string / required

Name/Identifier for the interface

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Examples

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:22:32.911 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
# !

- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/0
      access_groups:
      - afi: ipv4
        acls:
        - name: acl_1
          direction: in
        - name: acl_2
          direction: out
      - afi: ipv6
        acls:
        - name: acl6_1
          direction: in
        - name: acl6_2
          direction: out

    - name: GigabitEthernet0/0/0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: acl_1
          direction: out
    state: merged

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:27:49.378 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !

# Using merged to update interface ACL configuration

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:27:49.378 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !
#

- name: Update acl_interfaces configuration using merged
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: acl_2
          direction: out
        - name: acl_1
          direction: in
    state: merged

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:27:49.378 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
# !
#

# Using replaced

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !

- name: Replace device configurations of listed interface with provided configurations
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/0
      access_groups:
      - afi: ipv6
        acls:
        - name: acl6_3
          direction: in
    state: replaced

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv6 access-group acl6_3 ingress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !
#

# Using overridden

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !
#

- name: Overridde all interface ACL configuration with provided configuration
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
      access_groups:
      - afi: ipv4
        acls:
        - name: acl_2
          direction: in
      - afi: ipv6
        acls:
        - name: acl6_3
          direction: out
    state: overridden

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_2 ingress
#  ipv6 access-group acl6_3 egress
# !
#

# Using 'deleted' to delete all ACL attributes of a single interface

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !
#

- name: Delete all ACL attributes of GigabitEthernet0/0/0/1
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/1
    state: deleted

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
#

# Using 'deleted' to remove all ACLs attached to all the interfaces in the device

# Before state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !
#

- name: Delete all ACL interfaces configuration from the device
  cisco.iosxr.iosxr_acl_interfaces:
    state: deleted

# After state:
# -------------
#
# RP/0/RP0/CPU0:ios#sh running-config interface
# Wed Jan 15 12:34:56.689 UTC
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
#

# Using parsed

# parsed.cfg
# ------------
#
# interface MgmtEth0/RP0/CPU0/0
#  ipv4 address dhcp
# !
# interface GigabitEthernet0/0/0/0
#  shutdown
#  ipv4 access-group acl_1 ingress
#  ipv4 access-group acl_2 egress
#  ipv6 access-group acl6_1 ingress
#  ipv6 access-group acl6_2 egress
# !
# interface GigabitEthernet0/0/0/1
#  shutdown
#  ipv4 access-group acl_1 egress
# !

# - name: Convert ACL interfaces config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_acl_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed


# Task Output (redacted)
# -----------------------

# "parsed": [
#        {
#            "name": "MgmtEth0/RP0/CPU0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl_2"
#                        }
#                    ],
#                    "afi": "ipv4"
#                },
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl6_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl6_2"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "out",
#                            "name": "acl_1"
#                        }
#                    ],
#                    "afi": "ipv4"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/1"
#        }
#    ]
# }


# Using gathered

- name: Gather ACL interfaces facts using gathered state
  cisco.iosxr.iosxr_acl_interfaces:
    state: gathered


# Task Output (redacted)
# -----------------------
#
# "gathered": [
#   {
#      "name": "MgmtEth0/RP0/CPU0/0"
#   },
#   {
#      "access_groups": [
#          {
#              "acls": [
#                  {
#                      "direction": "in",
#                      "name": "acl_1"
#                  },
#                  {
#                      "direction": "out",
#                      "name": "acl_2"
#                  }
#              ],
#              "afi": "ipv4"
#          }
#      "name": "GigabitEthernet0/0/0/0"
#  },
#  {
#      "access_groups": [
#          {
#              "acls": [
#                  {
#                      "direction": "in",
#                      "name": "acl6_1"
#                  }
#              ],
#              "afi": "ipv6"
#          }
#       "name": "GigabitEthernet0/0/0/1"
#   }
# ]


# Using rendered

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_acl_interfaces:
    config:
    - name: GigabitEthernet0/0/0/0
      access_groups:
      - afi: ipv4
        acls:
        - name: acl_1
          direction: in
        - name: acl_2
          direction: out
    state: rendered

# Task Output (redacted)
# -----------------------

# "rendered": [
#     "interface GigabitEthernet0/0/0/0",
#     "ipv4 access-group acl_1 ingress",
#     "ipv4 access-group acl_2 egress"
# ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration model invocation.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration prior to the model invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["interface GigabitEthernet0/0/0/1", "ipv4 access-group acl_1 ingress", "ipv4 access-group acl_2 egress", "ipv6 access-group acl6_1 ingress", "interface GigabitEthernet0/0/0/2", "no ipv4 access-group acl_3 ingress", "ipv4 access-group acl_4 egress"]

Authors

  • Nilashish Chakraborty (@NilashishC)