You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_interfaces module – Resource module to configure interfaces.

Note

This module is part of the cisco.iosxr collection (version 4.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_interfaces.

New in cisco.iosxr 1.0.0

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module manages the interface attributes on Cisco IOS-XR network devices.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of interface options
description string	Interface description.
duplex string	Configures the interface duplex mode. Default is auto-negotiation when not configured. Choices: `"full"` `"half"`
enabled boolean	Administrative state of the interface. Set the value to `True` to administratively enable the interface or `False` to disable it. Choices: `false` `true` ← (default)
mtu integer	Sets the MTU value for the interface. Applicable for Ethernet interfaces only. Refer to vendor documentation for valid values.
name string / required	Full name of the interface to configure in `type + path` format. e.g. `GigabitEthernet0/0/0/0`
speed integer	Configure the speed for an interface. Default is auto-negotiation when not configured.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config interface. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state of the configuration after module completion Choices: `"merged"` ← (default) `"parsed"` `"deleted"` `"replaced"` `"rendered"` `"gathered"` `"overridden"`

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options.

Examples 

# Using merged
# Before state:
# -------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Replaced by Ansible Team
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
- name: Configure Ethernet interfaces
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      duplex: full
    state: merged
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Merged by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Merged by Ansible Network
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
# Using replaced
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Test
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
- name: Configure following interfaces and replace their existing config
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
      mtu: 2000
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      duplex: auto
    state: replaced
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  description Configured by Ansible
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Replaced by Ansible
#  mtu 2000
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Replaced by Ansible Network
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex half
#  shutdown
#  dot1q native vlan 1021
# !
# Using overridden
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured by Ansible
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured by Ansible
#  mtu 2600
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
- name: Override interfaces
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
      description: Configured by Ansible
      enabled: true
      duplex: auto
    - name: GigabitEthernet0/0/0/3
      description: Configured by Ansible Network
      enabled: false
      speed: 1000
    state: overridden
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
# Using deleted
# Before state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  description Configured and Overridden by Ansible Network
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  speed 1000
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  description Configured and Overridden by Ansible Network
#  mtu 2000
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  duplex full
#  shutdown
#  dot1q native vlan 1021
# !
- name: Delete IOSXR interfaces as in given arguments
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/2
    - name: GigabitEthernet0/0/0/3
    state: deleted
# After state:
# ------------
#
# viosxr#show running-config interface
# interface GigabitEthernet0/0/0/1
#  shutdown
# !
# interface GigabitEthernet0/0/0/2
#  vrf custB
#  ipv4 address 178.18.169.23 255.255.255.0
#  dot1q native vlan 30
# !
# interface GigabitEthernet0/0/0/3
#  vrf custB
#  ipv4 address 10.10.0.2 255.255.255.0
#  dot1q native vlan 1021
# !
# Using parsed
# parsed.cfg
# ------------
#
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
#  description Configured and Merged by Ansible-Network
#  mtu 110
#  ipv4 address 172.31.1.1 255.255.255.0
#  duplex half
# !
# interface GigabitEthernet0/0/0/3
#  shutdown
# !
# interface GigabitEthernet0/0/0/4
#  shutdown
# !
# - name: Convert ACL interfaces config to argspec without connecting to the appliance
#   cisco.iosxr.iosxr_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#        {
#            "name": "MgmtEth0/RP0/CPU0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl_2"
#                        }
#                    ],
#                    "afi": "ipv4"
#                },
#                {
#                    "acls": [
#                        {
#                            "direction": "in",
#                            "name": "acl6_1"
#                        },
#                        {
#                            "direction": "out",
#                            "name": "acl6_2"
#                        }
#                    ],
#                    "afi": "ipv6"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/0"
#        },
#        {
#            "access_groups": [
#                {
#                    "acls": [
#                        {
#                            "direction": "out",
#                            "name": "acl_1"
#                        }
#                    ],
#                    "afi": "ipv4"
#                }
#            ],
#            "name": "GigabitEthernet0/0/0/1"
#        }
#    ]
# }
# Using rendered
- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_interfaces:
    config:
    - name: GigabitEthernet0/0/0/0
      description: Configured and Merged by Ansible-Network
      mtu: 110
      enabled: true
      duplex: half
    - name: GigabitEthernet0/0/0/1
      description: Configured and Merged by Ansible-Network
      mtu: 2800
      enabled: false
      speed: 100
      duplex: full
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": [
#         "interface GigabitEthernet0/0/0/0",
#         "description Configured and Merged by Ansible-Network",
#         "mtu 110",
#         "duplex half",
#         "no shutdown",
#         "interface GigabitEthernet0/0/0/1",
#         "description Configured and Merged by Ansible-Network",
#         "mtu 2800",
#         "speed 100",
#         "duplex full",
#         "shutdown"
#     ]
# Using gathered
# Before state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !
- name: Gather IOSXR interfaces as in given arguments
  cisco.iosxr.iosxr_interfaces:
    config:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "description": "test for ansible",
#             "enabled": false,
#             "name": "Loopback888"
#         },
#         {
#             "description": "Configured and Merged by Ansible-Network",
#             "duplex": "half",
#             "enabled": true,
#             "mtu": 110,
#             "name": "GigabitEthernet0/0/0/0"
#         },
#         {
#             "enabled": false,
#             "name": "GigabitEthernet0/0/0/3"
#         },
#         {
#             "enabled": false,
#             "name": "GigabitEthernet0/0/0/4"
#         }
#     ]
# After state:
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config  interface
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 10.8.38.70 255.255.255.0
# !
# interface GigabitEthernet0/0/0/0
# description Configured and Merged by Ansible-Network
# mtu 110
# ipv4 address 172.31.1.1 255.255.255.0
# duplex half
# !
# interface GigabitEthernet0/0/0/3
# shutdown
# !
# interface GigabitEthernet0/0/0/4
# shutdown
# !

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The configuration as structured data after module completion. Returned: when changed Sample: `["The configuration returned will always be in the same format of the parameters above."]`
before list / elements=string	The configuration as structured data prior to module invocation. Returned: always Sample: `["The configuration returned will always be in the same format of the parameters above."]`
commands list / elements=string	The set of commands pushed to the remote device Returned: always Sample: `["interface GigabitEthernet0/0/0/2", "description: Configured by Ansible", "shutdown"]`

Authors

Sumit Jaiswal (@justjais)
Rohit Thakur (@rohitthakur2590)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_interfaces module – Resource module to configure interfaces.

Synopsis

Parameters

Notes

Examples

Return Values