You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_lldp_global module – Resource module to configure LLDP.

Note

This module is part of the cisco.iosxr collection (version 4.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lldp_global.

New in cisco.iosxr 1.0.0

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module manages Global Link Layer Discovery Protocol (LLDP) settings on IOS-XR devices.

Parameters 

Parameter	Comments
config dictionary	The provided global LLDP configuration.
holdtime integer	Specifies the holdtime (in sec) to be sent in packets.
reinit integer	Specifies the delay (in sec) for LLDP initialization on any interface.
subinterfaces boolean	Enable or disable LLDP over sub-interfaces. Choices: `false` `true`
timer integer	Specifies the rate at which LLDP packets are sent (in sec).
tlv_select dictionary	Specifies the LLDP TLVs to enable or disable.
management_address boolean	Enable or disable management address TLV. Choices: `false` `true`
port_description boolean	Enable or disable port description TLV. Choices: `false` `true`
system_capabilities boolean	Enable or disable system capabilities TLV. Choices: `false` `true`
system_description boolean	Enable or disable system description TLV. Choices: `false` `true`
system_name boolean	Enable or disable system name TLV. Choices: `false` `true`
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config lldp. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state of the configuration after module completion. Choices: `"merged"` ← (default) `"replaced"` `"deleted"` `"parsed"` `"gathered"` `"rendered"`

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options.

Examples 

# Using merged
#
#
# -------------
# Before State
# -------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 19:27:54.933 UTC
# % No such configuration item(s)
#
#

- name: Merge provided LLDP configuration with the existing configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {}
#
#  "commands": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#


# Using replaced
#
#
# -------------
# Before State
# -------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Replace existing LLDP device configuration with provided configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      tlv_select:
        port_description: false
        system_description: true
        management_description: true
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  }
#
#  "commands": [
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable",
#        "lldp tlv-select port-description disable"
#  ]
#
#  "after": {
#        "holdtime": 100,
#        "tlv_select": {
#            "port_description": false
#        }
#  }
#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:53:08.407 UTC
# lldp
#  holdtime 100
#  tlv-select
#   port-description disable
#  !
# !
#
#


# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:31:10.587 UTC
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !
#
#

- name: Deleted existing LLDP configurations from the device
  cisco.iosxr.iosxr_lldp_global:
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": {
#        "holdtime": 100,
#        "reinit": 2,
#        "subinterfaces": true,
#        "timer": 3000,
#        "tlv_select": {
#            "management_address": false,
#            "system_description": false
#        }
#  },
#
#  "commands": [
#        "no lldp holdtime 100",
#        "no lldp reinit 2",
#        "no lldp subinterfaces enable",
#        "no lldp timer 3000",
#        "no lldp tlv-select management-address disable",
#        "no lldp tlv-select system-description disable"
#  ]
#
#  "after": {}
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr#sh run lldp
# Tue Aug  6 21:38:31.187 UTC
# lldp
# !
#
# Using parsed:

# parsed.cfg
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Convert lldp global config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lldp_global:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# ------------------------
# Module Execution Result
# ------------------------
# parsed:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using gathered:

# Device config:
# lldp
#  timer 3000
#  reinit 2
#  subinterfaces enable
#  holdtime 100
#  tlv-select
#   management-address disable
#   system-description disable
#  !
# !

- name: Gather IOSXR lldp global configuration
  cisco.iosxr.iosxr_lldp_global:
    config:
    state: gathered


# ------------------------
# Module Execution Result
# ------------------------
# gathered:
#     holdtime: 100
#     reinit: 2
#     timer: 3000
#     subinterfaces: True
#     tlv_select:
#       management_address: False
#       system_description: False

# using rendered:

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lldp_global:
    config:
      holdtime: 100
      reinit: 2
      timer: 3000
      subinterfaces: true
      tlv_select:
        management_address: false
        system_description: false
    state: rendered

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "rendered": [
#        "lldp subinterfaces enable",
#        "lldp holdtime 100",
#        "lldp reinit 2",
#        "lldp tlv-select system-description disable",
#        "lldp tlv-select management-address disable",
#        "lldp timer 3000"
#  ]

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The configuration as structured data after module completion. Returned: when changed Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
before dictionary	The configuration as structured data prior to module invocation. Returned: always Sample: `"The configuration returned will always be in the same format\n of the parameters above.\n"`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["lldp subinterfaces enable", "lldp holdtime 100", "no lldp tlv-select management-address disable"]`

Authors

Nilashish Chakraborty (@NilashishC)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_lldp_global module – Resource module to configure LLDP.

Synopsis

Parameters

Notes

Examples

Return Values