cisco.iosxr.iosxr_prefix_lists module – Resource module to configure prefix lists.
Note
This module is part of the cisco.iosxr collection (version 4.1.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_prefix_lists.
New in cisco.iosxr 2.3.0
Synopsis
This module manages prefix-lists configuration on devices running Cisco IOSXR.
Parameters
Parameter |
Comments |
|---|---|
A list of prefix-lists configuration. |
|
The Address Family Identifier (AFI) for the prefix-lists. Choices:
|
|
List of prefix-list configurations. |
|
List of configurations for the specified prefix-list |
|
Prefix-List permit or deny. Choices:
|
|
Description of the prefix list. only applicable for action “remark”. |
|
Exact prefix length to be matched. |
|
Minimum prefix length to be matched. |
|
Maximum prefix length to be matched. |
|
IP or IPv6 prefix in A.B.C.D/LEN or A:B::C:D/LEN format. only applicable for action “permit” and “deny” |
|
Sequence Number. |
|
Name of the prefix-list. |
|
This option is used only with state parsed. The value of this option should be the output received from the Iosxr device by executing the command show running-config prefix-list. The state parsed reads the configuration from |
|
The state the configuration should be left in. Refer to examples for more details. With state replaced, for the listed prefix-lists, sequences that are in running-config but not in the task are negated. With state overridden, all prefix-lists that are in running-config but not in the task are negated. Please refer to examples for more details. Choices:
|
Notes
Note
Tested against IOSXR 7.0.2.
This module works with connection
network_cli.
Examples
# Using merged
# Before state
#RP/0/0/CPU0:10#show running-config
#Thu Feb 4 09:38:36.245 UTC
#% No such configuration item(s)
#RP/0/0/CPU0:10#
#
- name: Merge the provided configuration with the existing running configuration
cisco.iosxr.iosxr_prefix_lists:
state: merged
config:
- afi: ipv6
prefix_lists:
- name: pl_1
entries:
- prefix: 2001:db8:1234::/48
action: deny
sequence: 1
- name: pl_2
entries:
- sequence: 2
action: remark
description: TEST_PL_2_REMARK
- afi: ipv4
prefix_lists:
- name: pl1
entries:
- sequence: 3
action: remark
description: TEST_PL1_2_REMARK
- sequence: 4
action: permit
prefix: 10.0.0.0/24
- name: pl2
entries:
- sequence: 5
action: remark
description: TEST_PL2_REMARK
- name: pl3
entries:
- sequence: 6
action: permit
prefix: 35.0.0.0/8
eq: 0
#
# After state:
#
#RP/0/0/CPU0:10#show running-config
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
# !
# ipv4 prefix-list pl3
# 6 permit 35.0.0.0/8 eq 0
# !
#Module execution
#
# "after": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL_2_REMARK",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# },
# {
# "entries": [
# {
# "action": "permit",
# "prefix": "35.0.0.0/8",
# "sequence": 6,
# "eq": 0
# }
# ],
# "name": "pl3"
# },
# ]
# }
# ],
# "before": [],
# "changed": true,
# "commands": [
# "ipv6 prefix-list pl_1 1 deny 2001:db8:1234::/48",
# "ipv6 prefix-list pl_2 2 remark TEST_PL_2_REMARK",
# "ipv4 prefix-list pl1 3 remark TEST_PL1_2_REMARK",
# "ipv4 prefix-list pl1 4 permit 10.0.0.0/24",
# "ipv4 prefix-list pl2 5 remark TEST_PL2_REMARK"
# "ipv4 prefix-list pl3 6 permit 35.0.0.0/8 eq 0"
# ]
#-----------------------------------------------------------------------
# Using replaced:
# --------------
# Before state
#RP/0/0/CPU0:10#show running-config
#
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
# !
#
#
- name: Replace device configurations of listed prefix lists with provided configurations
register: result
cisco.iosxr.iosxr_prefix_lists: &id001
config:
- afi: ipv4
prefix_lists:
- name: pl1
entries:
- sequence: 3
action: permit
prefix: 10.0.0.0/24
- afi: ipv6
prefix_lists:
- name: pl_1
entries:
- prefix: 2001:db8:1234::/48
action: permit
sequence: 1
- name: pl_2
entries:
- sequence: 2
action: remark
description: TEST_PL1_2
state: replaced
# After state:
#RP/0/0/CPU0:10#show running-config
#
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL1_2
# !
# ipv4 prefix-list pl1
# 3 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
#
# Module Execution:
#
# "after": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 3
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# }
# ]
# }
# ],
# "before": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL_2_REMARK",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# }
# ]
# }
# ],
# "changed": true,
# "commands": [
# "no ipv4 prefix-list pl1 3 remark TEST_PL1_2_REMARK",
# "no ipv4 prefix-list pl1 4 permit 10.0.0.0/24",
# "ipv4 prefix-list pl1 3 permit 10.0.0.0/24",
# "ipv6 prefix-list pl_2 2 remark TEST_PL1_2"
# ],
# "invocation": {
# "module_args": {
# "config": [
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "permit",
# "description": null,
# "prefix": "10.0.0.0/24",
# "sequence": 3
# }
# ],
# "name": "pl1"
# }
# ]
# },
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "permit",
# "description": null,
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2",
# "prefix": null,
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# }
# ],
# "running_config": null,
# "state": "replaced"
# }
# }
# }
#------------------------------------------------------------------
# Using deleted:
# -------------
# Before state:
#RP/0/0/CPU0:10#show running-config
#
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
# ipv4 prefix-list pl3
# 6 permit 35.0.0.0/8 eq 0
- name: Delete all prefix-lists from the device
cisco.iosxr.iosxr_prefix_lists:
state: deleted
# After state:
#RP/0/0/CPU0:10#show running-config
#
#
# Module Execution:
#
# "after": [],
# "before": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 3
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# },
# {
# "entries": [
# {
# "action": "permit",
# "prefix": " 35.0.0.0/8",
# "sequence": 6,
# "eq": 0
# }
# ],
# "name": "pl3"
# },
# ]
# }
# ],
# "changed": true,
# "commands": [
# "no ipv6 prefix-list pl_1",
# "no ipv6 prefix-list pl_2",
# "no ipv4 prefix-list pl1",
# "no ipv4 prefix-list pl2"
# "no ipv4 prefix-list pl3"
# ],
# "invocation": {
# "module_args": {
# "config": null,
# "running_config": null,
# "state": "deleted"
# }
# }
# }
#---------------------------------------------------------------------------------
#
# using gathered:
# --------------
# Before state:
#RP/0/0/CPU0:10#show running-config
#
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
#!
# ipv4 prefix-list pl3
# 6 permit 35.0.0.0/8 eq 0
#!
- name: Gather ACL interfaces facts using gathered state
cisco.iosxr.iosxr_prefix_lists:
state: gathered
#
# Module Execution:
#
# "gathered": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL_2_REMARK",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# },
# {
# "entries": [
# {
# "action": "permit",
# "prefix": "35.0.0.0/8",
# "sequence": 6,
# "eq": 0
# }
# ],
# "name": "pl3"
# },
# ]
# }
# ],
# "changed": false,
#--------------------------------------------------------------------------
# Using parsed:
# --------------
#
# parsed.cfg
#------------------------------
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
#!
# ipv4 prefix-list pl3
# 6 permit 35.0.0.0/8 eq 0
#
#
- name: Parse externally provided Prefix_lists config to agnostic model
cisco.iosxr.iosxr_prefix_lists:
running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
state: parsed
#
# Module execution:
#"parsed": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL_2_REMARK",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# },
# {
# "entries": [
# {
# "action": "permit",
# "prefix": "35.0.0.0/8",
# "sequence": 6,
# "eq": 0
# }
# ],
# "name": "pl3"
# },
# ]
# }
# ]
#
#----------------------------------------------------------------------------
# Using rendered:
# --------------
#
- name: Render platform specific commands from task input using rendered state
register: result
cisco.iosxr.iosxr_prefix_lists:
config:
- afi: ipv6
prefix_lists:
- name: pl_1
entries:
- prefix: 2001:db8:1234::/48
action: deny
sequence: 1
- name: pl_2
entries:
- sequence: 2
action: remark
description: TEST_PL_2_REMARK
- afi: ipv4
prefix_lists:
- name: pl1
entries:
- sequence: 3
action: remark
description: TEST_PL1_2_REMARK
- sequence: 4
action: permit
prefix: 10.0.0.0/24
- name: pl2
entries:
- sequence: 5
action: remark
description: TEST_PL2_REMARK
- sequence: 6
action: permit
prefix: 35.0.0.0/8
eq: 0
state: rendered
# After state:
# Module Execution:
# "rendered": [
# "ipv6 prefix-list pl_1 1 deny 2001:db8:1234::/48",
# "ipv6 prefix-list pl_2 2 remark TEST_PL_2_REMARK",
# "ipv4 prefix-list pl1 3 remark TEST_PL1_2_REMARK",
# "ipv4 prefix-list pl1 4 permit 10.0.0.0/24",
# "ipv4 prefix-list pl2 5 remark TEST_PL2_REMARK",
# "ipv4 prefix-list pl2 6 permit 35.0.0.0/8 eq 0"
# ]
#
#---------------------------------------------------------------------------------
# Using overridden:
# --------------
# Before state:
#RP/0/0/CPU0:10#show running-config
#
# ipv6 prefix-list pl_1
# 1 deny 2001:db8:1234::/48
# !
# ipv6 prefix-list pl_2
# 2 remark TEST_PL_2_REMARK
# !
# ipv4 prefix-list pl1
# 3 remark TEST_PL1_2_REMARK
# 4 permit 10.0.0.0/24
# !
# ipv4 prefix-list pl2
# 5 remark TEST_PL2_REMARK
#
- name: Overridde all Prefix_lists configuration with provided configuration
cisco.iosxr.iosxr_prefix_lists:
config:
- afi: ipv4
prefix_lists:
- name: pl3
entries:
- sequence: 3
action: remark
description: TEST_PL1_3_REMARK
- sequence: 4
action: permit
prefix: 10.0.0.0/24
- sequence: 6
action: permit
prefix: 35.0.0.0/8
eq: 0
state: overridden
# After state:
#RP/0/0/CPU0:10#show running-config
#
#ipv4 prefix-list pl3
# 3 remark TEST_PL1_3_REMARK
# 4 permit 10.0.0.0/24
# 6 permit 35.0.0.0/8 eq 0
# !
#!
# # Module Execution:
# "after": [
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_3_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# },
# {
# "action": "permit",
# "prefix": "35.0.0.0/8",
# "sequence": 6,
# "eq": 0
# }
# ],
# "name": "pl3"
# }
# ]
# }
# ],
# "before": [
# {
# "afi": "ipv6",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "deny",
# "prefix": "2001:db8:1234::/48",
# "sequence": 1
# }
# ],
# "name": "pl_1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL_2_REMARK",
# "sequence": 2
# }
# ],
# "name": "pl_2"
# }
# ]
# },
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_2_REMARK",
# "sequence": 3
# },
# {
# "action": "permit",
# "prefix": "10.0.0.0/24",
# "sequence": 4
# }
# ],
# "name": "pl1"
# },
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL2_REMARK",
# "sequence": 5
# }
# ],
# "name": "pl2"
# }
# ]
# }
# ],
# "changed": true,
# "commands": [
# "no ipv6 prefix-list pl_1",
# "no ipv6 prefix-list pl_2",
# "no ipv4 prefix-list pl1",
# "no ipv4 prefix-list pl2",
# "ipv4 prefix-list pl3 3 remark TEST_PL1_3_REMARK",
# "ipv4 prefix-list pl3 4 permit 10.0.0.0/24",
# "ipv4 prefix-list pl3 6 permit 35.0.0.0/8 eq 0"
# ],
# "invocation": {
# "module_args": {
# "config": [
# {
# "afi": "ipv4",
# "prefix_lists": [
# {
# "entries": [
# {
# "action": "remark",
# "description": "TEST_PL1_3_REMARK",
# "prefix": null,
# "sequence": 3,
# "ge": null,
# "le": null,
# "eq": null
# },
# {
# "action": "permit",
# "description": null,
# "prefix": "10.0.0.0/24",
# "sequence": 4,
# "ge": null,
# "le": null,
# "eq": null
# },
# {
# "action": "permit",
# "description": null,
# "prefix": "35.0.0.0/8",
# "sequence": 6,
# "ge": null,
# "le": null,
# "eq": 0
# }
# ],
# "name": "pl3"
# }
# ]
# }
# ],
# "running_config": null,
# "state": "overridden"
# }
# }
# }
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration after module execution. Returned: when changed Sample: |
|
The configuration prior to the module execution. Returned: when state is Sample: |
|
The set of commands pushed to the remote device. Returned: when state is Sample: |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is Sample: |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is Sample: |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is Sample: |