cisco.ise.network_access_conditions module – Resource module for Network Access Conditions
Note
This module is part of the cisco.ise collection (version 2.5.12).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.ise.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.ise.network_access_conditions.
New in cisco.ise 1.0.0
Synopsis
Manage operations create, update and delete of the resource Network Access Conditions.
Network Access - Creates a library condition.
Network Access - Delete a library condition using condition Name.
Network Access - Delete a library condition.
Network Access - Update library condition using condition name.
Network Access - Update library condition.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
ciscoisesdk >= 2.0.8
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Dictionary attribute name. |
|
<ul><li>Attribute value for condition</li> <li>Value type is specified in dictionary object</li> <li>if multiple values allowed is specified in dictionary object</li></ul>. |
|
In case type is andBlock or orBlock addtional conditions will be aggregated under this logical (OR/AND) condition. |
|
<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>. |
|
Indicates whereas this condition is in negate mode. Choices:
|
|
Network Access Conditions’s link. |
|
Network Access Conditions’s href. |
|
Network Access Conditions’s rel. |
|
Network Access Conditions’s type. |
|
<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>. |
|
<p>Defines for which date/s TimeAndDate condition will be matched<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>. |
|
Network Access Conditions’s endDate. |
|
Network Access Conditions’s startDate. |
|
<p>Defines for which date/s TimeAndDate condition will be matched<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>. |
|
Network Access Conditions’s endDate. |
|
Network Access Conditions’s startDate. |
|
Condition description. |
|
Dictionary name. |
|
Dictionary value. |
|
<p>Defines for which hours a TimeAndDate condition will be matched<br> Time format - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>. |
|
Network Access Conditions’s endTime. |
|
Network Access Conditions’s startTime. |
|
<p>Defines for which hours a TimeAndDate condition will be matched<br> Time format - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>. |
|
Network Access Conditions’s endTime. |
|
Network Access Conditions’s startTime. |
|
Network Access Conditions’s id. |
|
Flag for Identity Services Engine SDK to enable debugging. Choices:
|
|
The Identity Services Engine hostname. |
|
The Identity Services Engine password to authenticate. |
|
The Identity Services Engine username to authenticate. |
|
Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices:
|
|
Flag that informs the SDK whether we send the CSRF token to ISE’s ERS APIs. If it is True, the SDK assumes that your ISE CSRF Check is enabled. If it is True, it assumes you need the SDK to manage the CSRF token automatically for you. Choices:
|
|
Flag to enable or disable SSL certificate verification. Choices:
|
|
Informs the SDK which version of Identity Services Engine to use. Default: |
|
Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices:
|
|
Indicates whereas this condition is in negate mode. Choices:
|
|
Network Access Conditions’s link. |
|
Network Access Conditions’s href. |
|
Network Access Conditions’s rel. |
|
Network Access Conditions’s type. |
|
Condition name. |
|
Equality operator. |
|
<p>Defines for which days this condition will be matched<br> Days format - Arrays of WeekDay enums <br> Default - List of All week days</p>. |
|
<p>Defines for which days this condition will NOT be matched<br> Days format - Arrays of WeekDay enums <br> Default - Not enabled</p>. |
Notes
Note
SDK Method used are network_access_conditions.NetworkAccessConditions.create_network_access_condition, network_access_conditions.NetworkAccessConditions.delete_network_access_condition_by_id, network_access_conditions.NetworkAccessConditions.delete_network_access_condition_by_name, network_access_conditions.NetworkAccessConditions.update_network_access_condition_by_id, network_access_conditions.NetworkAccessConditions.update_network_access_condition_by_name,
Paths used are post /network-access/condition, delete /network-access/condition/condition-by-name/{name}, delete /network-access/condition/{id}, put /network-access/condition/condition-by-name/{name}, put /network-access/condition/{id},
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco ISE SDK
The parameters starting with ise_ are used by the Cisco ISE Python SDK to establish the connection
See Also
See also
- Cisco ISE documentation for Network Access - Conditions
Complete reference of the Network Access - Conditions API.
Examples
- name: Create
cisco.ise.network_access_conditions:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: present
attributeName: string
attributeValue: string
children:
- conditionType: string
isNegate: true
link:
href: string
rel: string
type: string
conditionType: string
datesRange:
endDate: string
startDate: string
datesRangeException:
endDate: string
startDate: string
description: string
dictionaryName: string
dictionaryValue: string
hoursRange:
endTime: string
startTime: string
hoursRangeException:
endTime: string
startTime: string
id: string
isNegate: true
link:
href: string
rel: string
type: string
name: string
operator: string
weekDays:
- string
weekDaysException:
- string
- name: Update by name
cisco.ise.network_access_conditions:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: present
attributeName: string
attributeValue: string
children:
- conditionType: string
isNegate: true
link:
href: string
rel: string
type: string
conditionType: string
datesRange:
endDate: string
startDate: string
datesRangeException:
endDate: string
startDate: string
description: string
dictionaryName: string
dictionaryValue: string
hoursRange:
endTime: string
startTime: string
hoursRangeException:
endTime: string
startTime: string
id: string
isNegate: true
link:
href: string
rel: string
type: string
name: string
operator: string
weekDays:
- string
weekDaysException:
- string
- name: Delete by name
cisco.ise.network_access_conditions:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: absent
name: string
- name: Update by id
cisco.ise.network_access_conditions:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: present
attributeName: string
attributeValue: string
children:
- conditionType: string
isNegate: true
link:
href: string
rel: string
type: string
conditionType: string
datesRange:
endDate: string
startDate: string
datesRangeException:
endDate: string
startDate: string
description: string
dictionaryName: string
dictionaryValue: string
hoursRange:
endTime: string
startTime: string
hoursRangeException:
endTime: string
startTime: string
id: string
isNegate: true
link:
href: string
rel: string
type: string
name: string
operator: string
weekDays:
- string
weekDaysException:
- string
- name: Delete by id
cisco.ise.network_access_conditions:
ise_hostname: "{{ise_hostname}}"
ise_username: "{{ise_username}}"
ise_password: "{{ise_password}}"
ise_verify: "{{ise_verify}}"
state: absent
id: string
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: |
|
A dictionary or list with the response returned by the Cisco ISE Python SDK Returned: always Sample: |