You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.meraki.meraki_management_interface module – Configure Meraki management interfaces

Note

This module is part of the cisco.meraki collection (version 2.15.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki.

To use it in a playbook, specify: cisco.meraki.meraki_management_interface.

New in cisco.meraki 1.1.0

Synopsis

• Allows for configuration of management interfaces on Meraki MX, MS, and MR devices.

Parameters

Parameter	Comments
auth_key string / required	Authentication key provided by the dashboard. Required if environmental variable MERAKI_KEY is not set.
host string	Hostname for Meraki dashboard. Can be used to access regional Meraki environments, such as China. Default: "api.meraki.com"
internal_error_retry_time integer	Number of seconds to retry if server returns an internal server error. Default: 60
net_id string	ID of the network to bind or unbind configuration template to.
net_name string	Name of the network to bind or unbind configuration template to.
org_id string	ID of organization associated to a configuration template.
org_name aliases: organization string	Name of organization containing the configuration template.
output_format string	Instructs module whether response keys should be snake case (ex. net_id) or camel case (ex. netId). Choices: "snakecase" ← (default) "camelcase"
output_level string	Set amount of debug output during module execution. Choices: "debug" "normal" ← (default)
rate_limit_retry_time integer	Number of seconds to retry if rate limiter is triggered. Default: 165
serial string / required	serial number of the device to configure.
state string	Specifies whether configuration template information should be queried, modified, or deleted. Choices: "absent" "query" ← (default) "present"
timeout integer	Time to timeout for HTTP requests. Default: 30
use_https boolean	If no, it will use HTTP. Otherwise it will use HTTPS. Only useful for internal Meraki developers. Choices: false true ← (default)
use_proxy boolean	If no, it will not use a proxy, even if one is defined in an environment variable on the target hosts. Choices: false ← (default) true
validate_certs boolean	Whether to validate HTTP certificates. Choices: false true ← (default)
wan1 aliases: mgmt1 dictionary	Management interface details for management interface.
static_dns list / elements=string	DNS servers to use. Allows for a maximum of 2 addresses.
static_gateway_ip string	IP address for default gateway. Valid only if using_static_ip is True.
static_ip string	IP address assigned to Management interface. Valid only if using_static_ip is True.
static_subnet_mask string	Netmask for static IP address. Valid only if using_static_ip is True.
using_static_ip boolean	Configures the interface to use static IP or DHCP. Choices: false true
vlan integer	VLAN number to use for the management network.
wan_enabled string	States whether the management interface is enabled. Only valid for MX devices. Choices: "disabled" "enabled" "not configured"
wan2 aliases: mgmt2 dictionary	Management interface details for management interface.
static_dns list / elements=string	DNS servers to use. Allows for a maximum of 2 addresses.
static_gateway_ip string	IP address for default gateway. Valid only if using_static_ip is True.
static_ip string	IP address assigned to Management interface. Valid only if using_static_ip is True.
static_subnet_mask string	Netmask for static IP address. Valid only if using_static_ip is True.
using_static_ip boolean	Configures the interface to use static IP or DHCP. Choices: false true
vlan integer	VLAN number to use for the management network.
wan_enabled string	States whether the management interface is enabled. Only valid for MX devices. Choices: "disabled" "enabled" "not configured"

Notes

Note

• WAN2 parameter is only valid for MX appliances.

• wan_enabled should not be provided for non-MX devies.

• More information about the Meraki API can be found at https://dashboard.meraki.com/api_docs.

• Some of the options are likely only used for developers within Meraki.

• As of Ansible 2.9, Meraki modules output keys as snake case. To use camel case, set the ANSIBLE_MERAKI_FORMAT environment variable to camelcase.

• Ansible’s Meraki modules will stop supporting camel case output in Ansible 2.13. Please update your playbooks.

• Check Mode downloads the current configuration from the dashboard, then compares changes against this download. Check Mode will report changed if there are differences in the configurations, but does not submit changes to the API for validation of change.

Examples

- name: Set WAN2 as static IP
  meraki_management_interface:
    auth_key: abc123
    state: present
    org_name: YourOrg
    net_id: YourNetId
    serial: AAAA-BBBB-CCCC
    wan2:
      wan_enabled: enabled
      using_static_ip: yes
      static_ip: 192.168.16.195
      static_gateway_ip: 192.168.16.1
      static_subnet_mask: 255.255.255.0
      static_dns:
        - 1.1.1.1
      vlan: 1
  delegate_to: localhost

- name: Query management information
  meraki_management_interface:
    auth_key: abc123
    state: query
    org_name: YourOrg
    net_id: YourNetId
    serial: AAAA-BBBB-CCCC
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
data complex	Information about queried object. Returned: success
wan1 complex	Management configuration for WAN1 interface Returned: success
static_dns list / elements=string	List of DNS IP addresses Returned: only if static IP assignment is used Sample: ["1.1.1.1"]
static_gateway_ip string	Assigned static gateway IP Returned: only if static IP assignment is used Sample: "192.0.1.1"
static_ip string	Assigned static IP Returned: only if static IP assignment is used Sample: "192.0.1.2"
static_subnet_mask string	Assigned netmask for static IP Returned: only if static IP assignment is used Sample: "255.255.255.0"
using_static_ip boolean	Boolean value of whether static IP assignment is used on interface Returned: success Sample: true
vlan integer	VLAN tag id of management VLAN Returned: success Sample: 2
wan_enabled string	Enabled state of interface Returned: success Sample: "enabled"
wan2 complex	Management configuration for WAN1 interface Returned: success
static_dns list / elements=string	List of DNS IP addresses Returned: only if static IP assignment is used Sample: ["1.1.1.1"]
static_gateway_ip string	Assigned static gateway IP Returned: only if static IP assignment is used Sample: "192.0.1.1"
static_ip string	Assigned static IP Returned: only if static IP assignment is used Sample: "192.0.1.2"
static_subnet_mask string	Assigned netmask for static IP Returned: only if static IP assignment is used Sample: "255.255.255.0"
using_static_ip boolean	Boolean value of whether static IP assignment is used on interface Returned: success Sample: true
vlan integer	VLAN tag id of management VLAN Returned: success Sample: 2
wan_enabled string	Enabled state of interface Returned: success Sample: "enabled"

Authors

• Kevin Breit (@kbreit)

Collection links

Issue Tracker Repository (Sources)