community.aws.elb_target_info module – Gathers which target groups a target is associated with.
Note
This module is part of the community.aws collection (version 5.5.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install community.aws.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: community.aws.elb_target_info.
New in community.aws 1.0.0
Synopsis
This module will search through every target group in a region to find which ones have registered a given instance ID or IP.
Requirements
The below requirements are needed on the host that executes this module.
python >= 3.6
boto3 >= 1.18.0
botocore >= 1.21.0
Parameters
Parameter |
Comments |
|---|---|
AWS access key ID. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The aws_access_key and profile options are mutually exclusive. The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
The location of a CA Bundle to use when validating SSL certificates. The |
|
A dictionary to modify the botocore configuration. Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config. |
|
Use a The Choices:
|
|
URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS. The The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
Whether or not to get target groups not used by any load balancers. Choices:
|
|
What instance ID to get information for. |
|
A named AWS profile to use for authentication. See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html. The The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options. |
|
The AWS region to use. For global services such as IAM, Route53 and CloudFront, region is ignored. The See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region. The Support for the |
|
AWS secret access key. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The secret_key and profile options are mutually exclusive. The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK. The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
AWS STS session token for use with temporary credentials. See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys. The The security_token and profile options are mutually exclusive. Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0. The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01. Support for the |
|
When set to Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead. Choices:
|
Notes
Note
Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.
The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically
~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.
Examples
# practical use case - dynamically de-registering and re-registering nodes
- name: Get EC2 Metadata
amazon.aws.ec2_metadata_facts:
- name: Get initial list of target groups
delegate_to: localhost
community.aws.elb_target_info:
instance_id: "{{ ansible_ec2_instance_id }}"
region: "{{ ansible_ec2_placement_region }}"
register: target_info
- name: save fact for later
ansible.builtin.set_fact:
original_tgs: "{{ target_info.instance_target_groups }}"
- name: Deregister instance from all target groups
delegate_to: localhost
community.aws.elb_target:
target_group_arn: "{{ item.0.target_group_arn }}"
target_port: "{{ item.1.target_port }}"
target_az: "{{ item.1.target_az }}"
target_id: "{{ item.1.target_id }}"
state: absent
target_status: "draining"
region: "{{ ansible_ec2_placement_region }}"
with_subelements:
- "{{ original_tgs }}"
- "targets"
# This avoids having to wait for 'elb_target' to serially deregister each
# target group. An alternative would be to run all of the 'elb_target'
# tasks async and wait for them to finish.
- name: wait for all targets to deregister simultaneously
delegate_to: localhost
community.aws.elb_target_info:
get_unused_target_groups: false
instance_id: "{{ ansible_ec2_instance_id }}"
region: "{{ ansible_ec2_placement_region }}"
register: target_info
until: (target_info.instance_target_groups | length) == 0
retries: 60
delay: 10
- name: reregister in elbv2s
community.aws.elb_target:
region: "{{ ansible_ec2_placement_region }}"
target_group_arn: "{{ item.0.target_group_arn }}"
target_port: "{{ item.1.target_port }}"
target_az: "{{ item.1.target_az }}"
target_id: "{{ item.1.target_id }}"
state: present
target_status: "initial"
with_subelements:
- "{{ original_tgs }}"
- "targets"
# wait until all groups associated with this instance are 'healthy' or
# 'unused'
- name: wait for registration
community.aws.elb_target_info:
get_unused_target_groups: false
instance_id: "{{ ansible_ec2_instance_id }}"
region: "{{ ansible_ec2_placement_region }}"
register: target_info
until: (target_info.instance_target_groups |
map(attribute='targets') |
flatten |
map(attribute='target_health') |
rejectattr('state', 'equalto', 'healthy') |
rejectattr('state', 'equalto', 'unused') |
list |
length) == 0
retries: 61
delay: 10
# using the target groups to generate AWS CLI commands to reregister the
# instance - useful in case the playbook fails mid-run and manual
# rollback is required
- name: "reregistration commands: ELBv2s"
ansible.builtin.debug:
msg: >
aws --region {{ansible_ec2_placement_region}} elbv2
register-targets --target-group-arn {{item.target_group_arn}}
--targets{%for target in item.targets%}
Id={{target.target_id}},
Port={{target.target_port}}{%if target.target_az%},AvailabilityZone={{target.target_az}}
{%endif%}
{%endfor%}
loop: "{{target_info.instance_target_groups}}"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
a list of target groups to which the instance is registered to Returned: always |
|
The ARN of the target group Returned: always Sample: |
|
Which target type is used for this group Returned: always Sample: |
|
A list of targets that point to this instance ID Returned: always |
|
which availability zone is explicitly associated with this target Returned: when an AZ is associated with this instance Sample: |
|
The target health description. See following link for all the possible values https://boto3.readthedocs.io/en/latest/reference/services/elbv2.html#ElasticLoadBalancingv2.Client.describe_target_health Returned: always |
|
description of target health Returned: if state!=present Sample: |
|
reason code for target health Returned: if state!=healthy Sample: |
|
health state Returned: always Sample: |
|
the target ID referring to this instance Returned: always Sample: |
|
which port this target is listening on Returned: always Sample: |