You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.fortios.fmgr_fwobj_ippool module – Allows the editing of IP Pool Objects within FortiManager.

Note

This module is part of the community.fortios collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.fortios.

To use it in a playbook, specify: community.fortios.fmgr_fwobj_ippool.

Synopsis

• Allows users to add/edit/delete IP Pool Objects.

Parameters

Parameter	Comments
adom string	The ADOM the configuration should belong to. Default: "root"
arp_intf string	Select an interface from available options that will reply to ARP requests. (If blank, any is selected).
arp_reply string	Enable/disable replying to ARP requests when an IP Pool is added to a policy (default = enable). choice | disable | Disable ARP reply. choice | enable | Enable ARP reply. Choices: "disable" "enable"
associated_interface string	Associated interface name.
block_size string	Number of addresses in a block (64 to 4096, default = 128).
comments string	Comment.
dynamic_mapping string	EXPERTS ONLY! KNOWLEDGE OF FMGR JSON API IS REQUIRED! List of multiple child objects to be added. Expects a list of dictionaries. Dictionaries must use FortiManager API parameters, not the ansible ones listed below. If submitted, all other prefixed sub-parameter.ARE IGNORED. This object is MUTUALLY EXCLUSIVE with its options. We expect that you know what you are doing with these list parameters, and are leveraging the JSON API Guide. WHEN IN DOUBT, USE THE SUB OPTIONS BELOW INSTEAD TO CREATE OBJECTS WITH MULTIPLE TASKS
dynamic_mapping_arp_intf string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_arp_reply string	Dynamic Mapping clone of original suffixed parameter. Choices: "disable" "enable"
dynamic_mapping_associated_interface string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_block_size string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_comments string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_endip string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_num_blocks_per_user string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_pba_timeout string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_permit_any_host string	Dynamic Mapping clone of original suffixed parameter. Choices: "disable" "enable"
dynamic_mapping_source_endip string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_source_startip string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_startip string	Dynamic Mapping clone of original suffixed parameter.
dynamic_mapping_type string	Dynamic Mapping clone of original suffixed parameter. Choices: "overload" "one-to-one" "fixed-port-range" "port-block-allocation"
endip string	Final IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default| 0.0.0.0).
mode string	Sets one of three modes for managing the object. Allows use of soft-adds instead of overwriting existing values Choices: "add" ← (default) "set" "delete" "update"
name string	IP pool name.
num_blocks_per_user string	Number of addresses blocks that can be used by a user (1 to 128, default = 8).
pba_timeout string	Port block allocation timeout (seconds).
permit_any_host string	Enable/disable full cone NAT. choice | disable | Disable full cone NAT. choice | enable | Enable full cone NAT. Choices: "disable" "enable"
source_endip string	Final IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default| 0.0.0.0).
source_startip string	First IPv4 address (inclusive) in the range of the source addresses to be translated (format xxx.xxx.xxx.xxx, Default| 0.0.0.0).
startip string	First IPv4 address (inclusive) in the range for the address pool (format xxx.xxx.xxx.xxx, Default| 0.0.0.0).
type string	IP pool type (overload, one-to-one, fixed port range, or port block allocation). choice | overload | IP addresses in the IP pool can be shared by clients. choice | one-to-one | One to one mapping. choice | fixed-port-range | Fixed port range. choice | port-block-allocation | Port block allocation. Choices: "overload" "one-to-one" "fixed-port-range" "port-block-allocation"

Notes

Note

• Full Documentation at https://ftnt-ansible-docs.readthedocs.io/en/latest/.

Examples

- name: ADD FMGR_FIREWALL_IPPOOL Overload
  community.fortios.fmgr_fwobj_ippool:
    mode: "add"
    adom: "ansible"
    name: "Ansible_pool4_overload"
    comments: "Created by ansible"
    type: "overload"

    # OPTIONS FOR ALL MODES
    startip: "10.10.10.10"
    endip: "10.10.10.100"
    arp_reply: "enable"

- name: ADD FMGR_FIREWALL_IPPOOL one-to-one
  community.fortios.fmgr_fwobj_ippool:
    mode: "add"
    adom: "ansible"
    name: "Ansible_pool4_121"
    comments: "Created by ansible"
    type: "one-to-one"

    # OPTIONS FOR ALL MODES
    startip: "10.10.20.10"
    endip: "10.10.20.100"
    arp_reply: "enable"

- name: ADD FMGR_FIREWALL_IPPOOL FIXED PORT RANGE
  community.fortios.fmgr_fwobj_ippool:
    mode: "add"
    adom: "ansible"
    name: "Ansible_pool4_fixed_port"
    comments: "Created by ansible"
    type: "fixed-port-range"

    # OPTIONS FOR ALL MODES
    startip: "10.10.40.10"
    endip: "10.10.40.100"
    arp_reply: "enable"
    # FIXED PORT RANGE OPTIONS
    source_startip: "192.168.20.1"
    source_endip: "192.168.20.20"

- name: ADD FMGR_FIREWALL_IPPOOL PORT BLOCK ALLOCATION
  community.fortios.fmgr_fwobj_ippool:
    mode: "add"
    adom: "ansible"
    name: "Ansible_pool4_port_block_allocation"
    comments: "Created by ansible"
    type: "port-block-allocation"

    # OPTIONS FOR ALL MODES
    startip: "10.10.30.10"
    endip: "10.10.30.100"
    arp_reply: "enable"
    # PORT BLOCK ALLOCATION OPTIONS
    block_size: "128"
    num_blocks_per_user: "1"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
api_result string	full API response, includes status code and message Returned: always

Authors

• Luke Weighall (@lweighall)

• Andrew Welsh (@Ghilli3)

• Jim Huber (@p4r4n0y1ng)

Collection links

Issue Tracker Repository (Sources)