community.general.hwc_vpc_security_group_rule module – Creates a resource of Vpc/SecurityGroupRule in Huawei Cloud

Note

This module is part of the community.general collection (version 6.6.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.hwc_vpc_security_group_rule.

New in community.general 0.2.0

Synopsis

  • vpc security group management.

Requirements

The below requirements are needed on the host that executes this module.

  • keystoneauth1 >= 3.6.0

Parameters

Parameter

Comments

description

string

Provides supplementary information about the security group rule. The value is a string of no more than 255 characters that can contain letters and digits.

direction

string / required

Specifies the direction of access control. The value can be egress or ingress.

domain

string / required

The name of the Domain to scope to (Identity v3). (currently only domain names are supported, and not domain IDs).

ethertype

string

Specifies the IP protocol version. The value can be IPv4 or IPv6. If you do not set this parameter, IPv4 is used by default.

id

string

The id of resource to be managed.

identity_endpoint

string / required

The Identity authentication URL.

password

string / required

The password to login with.

port_range_max

integer

Specifies the end port number. The value ranges from 1 to 65535. If the protocol is not icmp, the value cannot be smaller than the port_range_min value. An empty value indicates all ports.

port_range_min

integer

Specifies the start port number. The value ranges from 1 to 65535. The value cannot be greater than the port_range_max value. An empty value indicates all ports.

project

string / required

The name of the Tenant (Identity v2) or Project (Identity v3). (currently only project names are supported, and not project IDs).

protocol

string

Specifies the protocol type. The value can be icmp, tcp, or udp. If the parameter is left blank, the security group supports all protocols.

region

string

The region to which the project belongs.

remote_group_id

string

Specifies the ID of the peer security group. The value is exclusive with parameter remote_ip_prefix.

remote_ip_prefix

string

Specifies the remote IP address. If the access control direction is set to egress, the parameter specifies the source IP address. If the access control direction is set to ingress, the parameter specifies the destination IP address. The value can be in the CIDR format or IP addresses. The parameter is exclusive with parameter remote_group_id.

security_group_id

string / required

Specifies the security group rule ID, which uniquely identifies the security group rule.

state

string

Whether the given object should exist in Huawei Cloud.

Choices:

  • "present" ← (default)

  • "absent"

user

string / required

The user name to login with (currently only user names are supported, and not user IDs).

Attributes

Attribute

Support

Description

check_mode

Support: full

Can run in check_mode and return changed status prediction without modifying target.

diff_mode

Support: none

Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Notes

Note

  • If id option is provided, it takes precedence over enterprise_project_id for security group rule selection.

  • security_group_id is used for security group rule selection. If more than one security group rule with this options exists, execution is aborted.

  • No parameter support updating. If one of option is changed, the module will create a new resource.

  • For authentication, you can set identity_endpoint using the ANSIBLE_HWC_IDENTITY_ENDPOINT env variable.

  • For authentication, you can set user using the ANSIBLE_HWC_USER env variable.

  • For authentication, you can set password using the ANSIBLE_HWC_PASSWORD env variable.

  • For authentication, you can set domain using the ANSIBLE_HWC_DOMAIN env variable.

  • For authentication, you can set project using the ANSIBLE_HWC_PROJECT env variable.

  • For authentication, you can set region using the ANSIBLE_HWC_REGION env variable.

  • Environment variables values will only be used if the playbook values are not set.

Examples

# create a security group rule
- name: Create a security group
  hwc_vpc_security_group:
    name: "ansible_network_security_group_test"
  register: sg
- name: Create a security group rule
  community.general.hwc_vpc_security_group_rule:
    direction: "ingress"
    protocol: "tcp"
    ethertype: "IPv4"
    port_range_max: 22
    security_group_id: "{{ sg.id }}"
    port_range_min: 22
    remote_ip_prefix: "0.0.0.0/0"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

description

string

Provides supplementary information about the security group rule. The value is a string of no more than 255 characters that can contain letters and digits.

Returned: success

direction

string

Specifies the direction of access control. The value can be egress or ingress.

Returned: success

ethertype

string

Specifies the IP protocol version. The value can be IPv4 or IPv6. If you do not set this parameter, IPv4 is used by default.

Returned: success

port_range_max

integer

Specifies the end port number. The value ranges from 1 to 65535. If the protocol is not icmp, the value cannot be smaller than the port_range_min value. An empty value indicates all ports.

Returned: success

port_range_min

integer

Specifies the start port number. The value ranges from 1 to 65535. The value cannot be greater than the port_range_max value. An empty value indicates all ports.

Returned: success

protocol

string

Specifies the protocol type. The value can be icmp, tcp, or udp. If the parameter is left blank, the security group supports all protocols.

Returned: success

remote_group_id

string

Specifies the ID of the peer security group. The value is exclusive with parameter remote_ip_prefix.

Returned: success

remote_ip_prefix

string

Specifies the remote IP address. If the access control direction is set to egress, the parameter specifies the source IP address. If the access control direction is set to ingress, the parameter specifies the destination IP address. The value can be in the CIDR format or IP addresses. The parameter is exclusive with parameter remote_group_id.

Returned: success

security_group_id

string

Specifies the security group rule ID, which uniquely identifies the security group rule.

Returned: success

Authors

  • Huawei Inc. (@huaweicloud)