community.general.proxmox module – Management of instances in Proxmox VE cluster

Note

This module is part of the community.general collection (version 6.6.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.proxmox.

Synopsis

  • allows you to create/delete/stop instances in Proxmox VE cluster

  • Starting in Ansible 2.1, it automatically detects containerization type (lxc for PVE 4, openvz for older)

  • Since community.general 4.0.0 on, there are no more default values, see proxmox_default_behavior.

Requirements

The below requirements are needed on the host that executes this module.

  • proxmoxer

  • requests

Parameters

Parameter

Comments

api_host

string / required

Specify the target host of the Proxmox VE cluster.

api_password

string

Specify the password to authenticate with.

You can use PROXMOX_PASSWORD environment variable.

api_token_id

string

added in community.general 1.3.0

Specify the token ID.

api_token_secret

string

added in community.general 1.3.0

Specify the token secret.

api_user

string / required

Specify the user to authenticate with.

clone

integer

added in community.general 4.3.0

ID of the container to be cloned.

description, hostname, and pool will be copied from the cloned container if not specified.

The type of clone created is defined by the clone_type parameter.

This operator is only supported for Proxmox clusters that use LXC containerization (PVE version >= 4).

clone_type

string

added in community.general 4.3.0

Type of the clone created.

full creates a full clone, and storage must be specified.

linked creates a linked clone, and the cloned container must be a template container.

opportunistic creates a linked clone if the cloned container is a template container, and a full clone if not. storage may be specified, if not it will fall back to the default.

Choices:

  • "full"

  • "linked"

  • "opportunistic" ← (default)

cores

integer

Specify number of cores per socket.

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 1.

cpus

integer

numbers of allocated cpus for instance

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 1.

cpuunits

integer

CPU weight for a VM

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 1000.

description

string

added in community.general 0.2.0

Specify the description for the container. Only used on the configuration web interface.

This is saved as a comment inside the configuration file.

disk

string

This option was previously described as “hard disk size in GB for instance” however several formats describing a lxc mount are permitted.

Older versions of Proxmox will accept a numeric value for size using the storage parameter to automatically choose which storage to allocate from, however new versions enforce the <STORAGE>:<SIZE> syntax.

Additional options are available by using some combination of the following key-value pairs as a comma-delimited list [volume=]<volume> [,acl=<1|0>] [,mountoptions=<opt[;opt...]>] [,quota=<1|0>] [,replicate=<1|0>] [,ro=<1|0>] [,shared=<1|0>] [,size=<DiskSize>].

See https://pve.proxmox.com/wiki/Linux_Container for a full description.

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 3.

features

list / elements=string

added in community.general 2.0.0

Specifies a list of features to be enabled. For valid options, see https://pve.proxmox.com/wiki/Linux_Container#pct_options.

Some features require the use of a privileged container.

force

boolean

forcing operations

can be used only with states present, stopped, restarted

with state=present force option allow to overwrite existing container

with states stopped , restarted allow to force stop instance

Choices:

  • false ← (default)

  • true

hookscript

string

added in community.general 0.2.0

Script that will be executed during various steps in the containers lifetime.

hostname

string

the instance hostname

required only for state=present

must be unique if vmid is not passed

ip_address

string

specifies the address the container will be assigned

memory

integer

memory size in MB for instance

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 512.

mounts

dictionary

specifies additional mounts (separate disks) for the container. As a hash/dictionary defining mount points

nameserver

string

sets DNS server IP address for a container

netif

dictionary

specifies network interfaces for the container. As a hash/dictionary defining interfaces.

node

string

Proxmox VE node on which to operate.

Only required for state=present.

For every other states it will be autodiscovered.

onboot

boolean

specifies whether a VM will be started during system bootup

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is false.

Choices:

  • false

  • true

ostemplate

string

the template for VM creating

required only for state=present

password

string

the instance root password

pool

string

Add the new VM to the specified pool.

proxmox_default_behavior

string

added in community.general 1.3.0

As of community.general 4.0.0, various options no longer have default values. These default values caused problems when users expected different behavior from Proxmox by default or filled options which caused problems when set.

The value compatibility (default before community.general 4.0.0) will ensure that the default values are used when the values are not explicitly specified by the user. The new default is no_defaults, which makes sure these options have no defaults.

This affects the disk, cores, cpus, memory, onboot, swap, cpuunits options.

Choices:

  • "compatibility"

  • "no_defaults" ← (default)

pubkey

string

Public key to add to /root/.ssh/authorized_keys. This was added on Proxmox 4.2, it is ignored for earlier versions

purge

boolean

added in community.general 2.3.0

Remove container from all related configurations.

For example backup jobs, replication jobs, or HA.

Related ACLs and Firewall entries will always be removed.

Used with state absent.

Choices:

  • false ← (default)

  • true

searchdomain

string

sets DNS search domain for a container

state

string

Indicate desired state of the instance

Choices:

  • "present" ← (default)

  • "started"

  • "absent"

  • "stopped"

  • "restarted"

storage

string

target storage

Default: "local"

swap

integer

swap memory size in MB for instance

This option has no default unless proxmox_default_behavior is set to compatiblity; then the default is 0.

tags

list / elements=string

added in community.general 6.2.0

List of tags to apply to the container.

Tags must start with [a-z0-9_] followed by zero or more of the following characters [a-z0-9_-+.].

Tags are only available in Proxmox 7+.

timeout

integer

timeout for operations

Default: 30

unprivileged

boolean

Indicate if the container should be unprivileged.

The default value for this parameter is false but that is deprecated and it will be replaced with true in community.general 7.0.0.

Choices:

  • false

  • true

validate_certs

boolean

If false, SSL certificates will not be validated.

This should only be used on personally controlled sites using self-signed certificates.

Choices:

  • false ← (default)

  • true

vmid

integer

Specifies the instance ID.

If not set the next available ID will be fetched from ProxmoxAPI.

Attributes

Attribute

Support

Description

check_mode

Support: none

Can run in check_mode and return changed status prediction without modifying target.

diff_mode

Support: none

Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Examples

- name: Create new container with minimal options
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'

- name: Create new container with hookscript and description
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    hookscript: 'local:snippets/vm_hook.sh'
    description: created with ansible

- name: Create new container automatically selecting the next available vmid.
  community.general.proxmox:
    node: 'uk-mc02'
    api_user: 'root@pam'
    api_password: '1q2w3e'
    api_host: 'node1'
    password: '123456'
    hostname: 'example.org'
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'

- name: Create new container with minimal options with force(it will rewrite existing container)
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    force: true

- name: Create new container with minimal options use environment PROXMOX_PASSWORD variable(you should export it before)
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'

- name: Create new container with minimal options defining network interface with dhcp
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    netif: '{"net0":"name=eth0,ip=dhcp,ip6=dhcp,bridge=vmbr0"}'

- name: Create new container with minimal options defining network interface with static ip
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: 'local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    netif: '{"net0":"name=eth0,gw=192.168.0.1,ip=192.168.0.2/24,bridge=vmbr0"}'

- name: Create new container with minimal options defining a mount with 8GB
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    mounts: '{"mp0":"local:8,mp=/mnt/test/"}'

- name: Create new container with minimal options defining a cpu core limit
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    cores: 2

- name: Create a new container with nesting enabled and allows the use of CIFS/NFS inside the container.
  community.general.proxmox:
    vmid: 100
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    password: 123456
    hostname: example.org
    ostemplate: local:vztmpl/ubuntu-14.04-x86_64.tar.gz'
    features:
     - nesting=1
     - mount=cifs,nfs

- name: >
    Create a linked clone of the template container with id 100. The newly created container with be a
    linked clone, because no storage parameter is defined
  community.general.proxmox:
    vmid: 201
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    clone: 100
    hostname: clone.example.org

- name: Create a full clone of the container with id 100
  community.general.proxmox:
    vmid: 201
    node: uk-mc02
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    clone: 100
    hostname: clone.example.org
    storage: local

- name: Start container
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    state: started

- name: >
    Start container with mount. You should enter a 90-second timeout because servers
    with additional disks take longer to boot
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    state: started
    timeout: 90

- name: Stop container
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    state: stopped

- name: Stop container with force
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    force: true
    state: stopped

- name: Restart container(stopped or mounted container you can't restart)
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    state: restarted

- name: Remove container
  community.general.proxmox:
    vmid: 100
    api_user: root@pam
    api_password: 1q2w3e
    api_host: node1
    state: absent

Authors

  • Sergei Antipov (@UnderGreen)