You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.hashi_vault.vault_kv2_write module – Perform a write operation against a KVv2 secret in HashiCorp Vault

Note

This module is part of the community.hashi_vault collection (version 4.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.hashi\_vault. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.hashi_vault.vault_kv2_write.

New in community.hashi_vault 4.2.0

Synopsis
Requirements
Parameters
Attributes
See Also
Examples
Return Values

Synopsis 

Perform a write operation against a KVv2 secret in HashiCorp Vault.

Requirements 

The below requirements are needed on the host that executes this module.

hvac (Python library)
For detailed requirements, see the collection requirements page.

Parameters 

Parameter	Comments
auth_method string	Authentication method to be used. `none` auth method was added in collection version `1.2.0`. `cert` auth method was added in collection version `1.4.0`. `aws_iam_login` was renamed `aws_iam` in collection version `2.1.0` and was removed in `3.0.0`. `azure` auth method was added in collection version `3.2.0`. Choices: `"token"` ← (default) `"userpass"` `"ldap"` `"approle"` `"aws_iam"` `"azure"` `"jwt"` `"cert"` `"none"`
aws_access_key aliases: aws_access_key_id string	The AWS access key to use.
aws_iam_server_id string added in community.hashi_vault 0.2.0	If specified, sets the value to use for the `X-Vault-AWS-IAM-Server-ID` header as part of `GetCallerIdentity` request.
aws_profile aliases: boto_profile string	The AWS profile
aws_secret_key aliases: aws_secret_access_key string	The AWS secret key that corresponds to the access key.
aws_security_token string	The AWS security token if using temporary access and secret keys.
azure_client_id string added in community.hashi_vault 3.2.0	The client ID (also known as application ID) of the Azure AD service principal or managed identity. Should be a UUID. If not specified, will use the system assigned managed identity.
azure_client_secret string added in community.hashi_vault 3.2.0	The client secret of the Azure AD service principal.
azure_resource string added in community.hashi_vault 3.2.0	The resource URL for the application registered in Azure Active Directory. Usually should not be changed from the default. Default: `"https://management.azure.com/"`
azure_tenant_id string added in community.hashi_vault 3.2.0	The Azure Active Directory Tenant ID (also known as the Directory ID) of the service principal. Should be a UUID. Required when using a service principal to authenticate to Vault, e.g. required when both azure_client_id and azure_client_secret are specified. Optional when using managed identity to authenticate to Vault.
ca_cert aliases: cacert string	Path to certificate to use for authentication. If not specified by any other means, the `VAULT_CACERT` environment variable will be used.
cas integer	Perform a check-and-set operation.
cert_auth_private_key path added in community.hashi_vault 1.4.0	For `cert` auth, path to the private key file to authenticate with, in PEM format.
cert_auth_public_key path added in community.hashi_vault 1.4.0	For `cert` auth, path to the certificate file to authenticate with, in PEM format.
data dictionary / required	KVv2 secret data to write.
engine_mount_point string	The path where the secret backend is mounted. Default: `"secret"`
jwt string	The JSON Web Token (JWT) to use for JWT authentication to Vault.
mount_point string	Vault mount point. If not specified, the default mount point for a given auth method is used. Does not apply to token authentication.
namespace string	Vault namespace where secrets reside. This option requires HVAC 0.7.0+ and Vault 0.11+. Optionally, this may be achieved by prefixing the authentication mount point and/or secret path with the namespace (e.g `mynamespace/secret/mysecret`). If environment variable `VAULT_NAMESPACE` is set, its value will be used last among all ways to specify namespace.
password string	Authentication password.
path string / required	Vault KVv2 path to be written to. This is relative to the engine_mount_point, so the mount path should not be included.
proxies any added in community.hashi_vault 1.1.0	URL(s) to the proxies used to access the Vault service. It can be a string or a dict. If it’s a dict, provide the scheme (eg. `http` or `https`) as the key, and the URL as the value. If it’s a string, provide a single URL that will be used as the proxy for both `http` and `https` schemes. A string that can be interpreted as a dictionary will be converted to one (see examples). You can specify a different proxy for HTTP and HTTPS resources. If not specified, environment variables from the Requests library are used.
read_before_write boolean	Read the secret first and write only when data differs from the read data. Requires `read` permission on the secret if `true`. If `false`, this module will always write to path when not in check mode. Choices: `false` ← (default) `true`
region string	The AWS region for which to create the connection.
retries any added in community.hashi_vault 1.3.0	Allows for retrying on errors, based on the Retry class in the urllib3 library. This collection defines recommended defaults for retrying connections to Vault. This option can be specified as a positive number (integer) or dictionary. If this option is not specified or the number is `0`, then retries are disabled. A number sets the total number of retries, and uses collection defaults for the other settings. A dictionary value is used directly to initialize the `Retry` class, so it can be used to fully customize retries. For detailed information on retries, see the collection User Guide.
retry_action string added in community.hashi_vault 1.3.0	Controls whether and how to show messages on retries. This has no effect if a request is not retried. Choices: `"ignore"` `"warn"` ← (default)
role_id string	Vault Role ID or name. Used in `approle`, `aws_iam`, `azure` and `cert` auth methods. For `cert` auth, if no role_id is supplied, the default behavior is to try all certificate roles and return any one that matches. For `azure` auth, role_id is required.
secret_id string	Secret ID to be used for Vault AppRole authentication.
timeout integer added in community.hashi_vault 1.3.0	Sets the connection timeout in seconds. If not set, then the `hvac` library’s default is used.
token string	Vault token. Token may be specified explicitly, through the listed [env] vars, and also through the `VAULT_TOKEN` env var. If no token is supplied, explicitly or through env, then the plugin will check for a token file, as determined by token_path and token_file. The order of token loading (first found wins) is `token param -> ansible var -> ANSIBLE_HASHI_VAULT_TOKEN -> VAULT_TOKEN -> token file`.
token_file string	If no token is specified, will try to read the token from this file in token_path. Default: `".vault-token"`
token_path string	If no token is specified, will try to read the token_file from this path.
token_validate boolean added in community.hashi_vault 0.2.0	For token auth, will perform a `lookup-self` operation to determine the token’s validity before using it. Disable if your token does not have the `lookup-self` capability. Choices: `false` ← (default) `true`
url string	URL to the Vault service. If not specified by any other means, the value of the `VAULT_ADDR` environment variable will be used. If `VAULT_ADDR` is also not defined then an error will be raised.
username string	Authentication user name.
validate_certs boolean	Controls verification and validation of SSL certificates, mostly you only want to turn off with self signed ones. Will be populated with the inverse of `VAULT_SKIP_VERIFY` if that is set and validate_certs is not explicitly provided. Will default to `true` if neither validate_certs or `VAULT_SKIP_VERIFY` are set. Choices: `false` `true`

Attributes 

Attribute	Support	Description
action_group	Action group: community.hashi_vault.vault	Use `group/community.hashi_vault.vault` in `module_defaults` to set defaults for this module.
check_mode	Support: partial If read_before_write is `true`, full check mode functionality is supported. If read_before_write is `false`, the status will always be `changed` but a write will not be performed in check mode.	Can run in `check_mode` and return changed status prediction without modifying target.

Examples 

- name: Write/create a secret
  community.hashi_vault.vault_kv2_write:
    url: https://vault:8200
    path: hello
    data:
      foo: bar

- name: Create a secret with CAS (the secret must not exist)
  community.hashi_vault.vault_kv2_write:
    url: https://vault:8200
    path: caspath
    cas: 0
    data:
      foo: bar

- name: Update a secret with CAS
  community.hashi_vault.vault_kv2_write:
    url: https://vault:8200
    path: caspath
    cas: 2
    data:
      hello: world

# This module does not have patch capability built in.
# Patching can be achieved with multiple tasks.

- name: Retrieve current secret
  register: current
  community.hashi_vault.vault_kv2_get:
    url: https://vault:8200
    path: hello

## patch without CAS
- name: Update the secret
  vars:
    values_to_update:
      foo: baz
      hello: goodbye
  community.hashi_vault.vault_kv2_write:
    url: https://vault:8200
    path: hello
    data: >-
      {{
        current.secret
        | combine(values_to_update)
      }}

## patch with CAS
- name: Update the secret
  vars:
    values_to_update:
      foo: baz
      hello: goodbye
  community.hashi_vault.vault_kv2_write:
    url: https://vault:8200
    path: hello
    cas: '{{ current.metadata.version | int }}'
    data: >-
      {{
        current.secret
        | combine(values_to_update)
      }}

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
raw dictionary	The raw Vault response. Returned: changed Sample: `{"auth": null, "data": {"created_time": "2023-02-21T19:51:50.801757862Z", "custom_metadata": null, "deletion_time": "", "destroyed": false, "version": 1}, "lease_duration": 0, "lease_id": "", "renewable": false, "request_id": "52eb1aa7-5a38-9a02-9246-efc5bf9581ec", "warnings": null, "wrap_info": null}`

Authors

Devon Mar (@devon-mar)

Collection links

Issue Tracker Repository (Sources) Discussion, Q&A, troubleshooting Communication

community.hashi_vault.vault_kv2_write module – Perform a write operation against a KVv2 secret in HashiCorp Vault

Synopsis

Requirements

Parameters

Attributes

See Also

Examples

Return Values