community.network.ce_interface_ospf module – Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 5.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_interface_ospf.

Synopsis

  • Manages configuration of an OSPF interface instanceon HUAWEI CloudEngine switches.

Parameters

Parameter

Comments

area

string / required

Ospf area associated with this ospf process. Valid values are a string, formatted as an IP address (i.e. “0.0.0.0”) or as an integer between 1 and 4294967295.

auth_key_id

string

Authentication key id when auth_mode is ‘hmac-sha256’, ‘md5’ or ‘hmac-md5. Valid value is an integer is in the range from 1 to 255.

auth_mode

string

Specifies the authentication type.

Choices:

  • "none"

  • "null"

  • "hmac-sha256"

  • "md5"

  • "hmac-md5"

  • "simple"

auth_text_md5

string

Specifies a password for MD5, HMAC-MD5, or HMAC-SHA256 authentication. The value is a string of 1 to 255 case-sensitive characters, spaces not supported.

auth_text_simple

string

Specifies a password for simple authentication. The value is a string of 1 to 8 characters.

cost

string

The cost associated with this interface. Valid values are an integer in the range from 1 to 65535.

dead_interval

string

Time interval an ospf neighbor waits for a hello packet before tearing down adjacencies. Valid values are an integer in the range from 1 to 235926000.

hello_interval

string

Time between sending successive hello packets. Valid values are an integer in the range from 1 to 65535.

interface

string / required

Full name of interface, i.e. 40GE1/0/10.

process_id

string / required

Specifies a process ID. The value is an integer ranging from 1 to 4294967295.

silent_interface

boolean

Setting to true will prevent this interface from receiving HELLO packets. Valid values are ‘true’ and ‘false’.

Choices:

  • false ← (default)

  • true

state

string

Determines whether the config should be present or not on the device.

Choices:

  • "present" ← (default)

  • "absent"

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: Eth_trunk module test
  hosts: cloudengine
  connection: local
  gather_facts: no
  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: "{{ ansible_ssh_port }}"
      username: "{{ username }}"
      password: "{{ password }}"
      transport: cli

  tasks:
  - name: Enables OSPF and sets the cost on an interface
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      cost: 100
      provider: '{{ cli }}'

  - name: Sets the dead interval of the OSPF neighbor
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      dead_interval: 100
      provider: '{{ cli }}'

  - name: Sets the interval for sending Hello packets on an interface
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      hello_interval: 2
      provider: '{{ cli }}'

  - name: Disables an interface from receiving and sending OSPF packets
    community.network.ce_interface_ospf:
      interface: 10GE1/0/30
      process_id: 1
      area: 100
      silent_interface: true
      provider: '{{ cli }}'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: true

end_state

dictionary

k/v pairs of configuration after module execution

Returned: verbose mode

Sample: {"area": "0.0.0.100", "auth_mode": "none", "cost": "100", "dead_interval": "40", "hello_interval": "10", "interface": "10GE1/0/30", "process_id": "1", "silent_interface": "false"}

existing

dictionary

k/v pairs of existing configuration

Returned: verbose mode

Sample: {"area": "0.0.0.100", "process_id": "1"}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: verbose mode

Sample: {"area": "0.0.0.100", "cost": "100", "interface": "10GE1/0/30", "process_id": "1"}

updates

list / elements=string

commands sent to the device

Returned: always

Sample: ["interface 10GE1/0/30", "ospf enable 1 area 0.0.0.100", "ospf cost 100"]

Authors

  • QijunPan (@QijunPan)