community.network.slxos_l3_interface module – Manage L3 interfaces on Extreme Networks SLX-OS network devices.

Note

This module is part of the community.network collection (version 5.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.slxos_l3_interface.

Synopsis

  • This module provides declarative management of L3 interfaces on slxos network devices.

Parameters

Parameter

Comments

aggregate

string

List of L3 interfaces definitions. Each of the entry in aggregate list should define name of interface name and a optional ipv4 or ipv6 address.

ipv4

string

IPv4 address to be set for the L3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 192.168.0.1/24

ipv6

string

IPv6 address to be set for the L3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64

name

string

Name of the L3 interface to be configured eg. Ethernet 0/2

state

string

State of the L3 interface configuration. It indicates if the configuration should be present or absent on remote device.

Choices:

  • "present" ← (default)

  • "absent"

Notes

Note

  • Tested against slxos 15.2

Examples

- name: Remove Ethernet 0/3 IPv4 and IPv6 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    state: absent

- name: Set Ethernet 0/3 IPv4 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    ipv4: 192.168.0.1/24

- name: Set Ethernet 0/3 IPv6 address
  community.network.slxos_l3_interface:
    name: Ethernet 0/3
    ipv6: "fd5d:12c9:2201:1::1/64"

- name: Set IP addresses on aggregate
  community.network.slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }

- name: Remove IP addresses on aggregate
  community.network.slxos_l3_interface:
    aggregate:
      - { name: Ethernet 0/3, ipv4: 192.168.2.10/24 }
      - { name: Ethernet 0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

The list of configuration mode commands to send to the device

Returned: always, except for the platforms that use Netconf transport to manage the device.

Sample: ["interface Ethernet 0/2", "ip address 192.168.0.1/24", "ipv6 address fd5d:12c9:2201:1::1/64"]

Authors

  • Matthew Stone (@bigmstone)