You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_monitor_dns module – Manage DNS monitors on a BIG-IP

Note

This module is part of the f5networks.f5_modules collection (version 1.25.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5\_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_monitor_dns.

New in f5networks.f5_modules 1.0.0

Synopsis

• Manages DNS health monitors on a BIG-IP.

Parameters

Parameter	Comments
accept_rcode string	Specifies the RCODE required in the response for an up status. When creating a new monitor, if this parameter is not specified, the default value is no-error. When no-error, specifies the status of the node is marked up if the received DNS message has no error. When anything, specifies the status of the node is marked up irrespective of the RCODE in the DNS message received. If this parameter is set to anything, it disregards the receive string, and nullify it if the monitor is being updated. Choices: "no-error" "anything"
adaptive boolean	Specifies whether adaptive response time monitoring is enabled for this monitor. When true, the monitor determines the state of a service based on how divergent from the mean latency a monitor probe for that service is allowed to be. Also, values for the allowed_divergence, adaptive_limit, and and sampling_timespan are enforced. When disabled, the monitor determines the state of a service based on the interval, up_interval, time_until_up, and timeout monitor settings. Choices: false true
adaptive_limit integer	Specifies the absolute number of milliseconds that may not be exceeded by a monitor probe, regardless of allowed_divergence setting, for a probe to be considered successful. This value applies regardless of the value of the allowed_divergence setting. While this value can be configured when adaptive is false, it will not take effect on the system until adaptive is true.
allowed_divergence_type string	When specifying a new monitor, if adaptive is true, the default is relative. When absolute, the number of milliseconds the latency of a monitor probe can exceed the mean latency of a monitor probe for the service being probed. In typical cases, if the monitor detects three probes in a row that miss the latency value you set, the pool member or node is marked down. When relative, the percentage of deviation the latency of a monitor probe can exceed the mean latency of a monitor probe for the service being probed. Choices: "relative" "absolute"
allowed_divergence_value integer	When specifying a new monitor, if adaptive is true, and type is relative, the default is 25 percent.
answer_section_contains string	Specifies the type of DNS query the monitor sends. When creating a new monitor, if this value is not specified, the default value is query-type. When query-type, specifies that the response should contain at least one answer of which the resource record type matches the query type. When any-type, specifies the DNS message should contain at least one answer. When anything, specifies an empty answer is enough to mark the status of the node up. Choices: "any-type" "anything" "query-type"
description string	The description of the monitor.
interval integer	The interval specifying how frequently the monitor instance of this template will run. This value must be less than the timeout value. When creating a new monitor, if this parameter is not provided, the default 5 is used.
ip string	IP address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value will be *.
manual_resume boolean	Specifies whether the system automatically changes the status of a resource to enabled at the next successful monitor check. If true, you must manually re-enable the resource before the system can use it for load balancing connections. When creating a new monitor, if this parameter is not specified, the default value is false. When true, specifies you must manually re-enable the resource after an unsuccessful monitor check. When false, specifies the system automatically changes the status of a resource to enabled at the next successful monitor check. Choices: false true
name string / required	Specifies the name of the monitor.
parent string	The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the dns parent on the Common partition. Default: "/Common/dns"
partition string	Device partition to manage resources on. Default: "Common"
port string	Port address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value will be *. Note that if specifying an IP address, you must use a value between 1 and 65535.
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TELEMETRY_OFF. Previously used variable F5_TEEM is deprecated as its name was confusing. Choices: false ← (default) true
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.
server string / required	The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. Default: 443
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: "rest" ← (default)
user string / required	The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
validate_certs boolean	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS. Choices: false true ← (default)
query_name string	Specifies a query name for the monitor to use in a DNS query.
query_type string	Specifies the type of DNS query the monitor sends. When creating a new monitor, if this parameter is not specified, the default value is a. When a, specifies the monitor will send a DNS query of type A. When aaaa, specifies the monitor will send a DNS query of type AAAA. Choices: "a" "aaaa"
receive string	Specifies the IP address the monitor uses from the resource record sections of the DNS response. The IP address should be specified in the dotted-decimal notation or IPv6 notation.
reverse boolean	Specifies whether the monitor operates in reverse mode. When the monitor is in reverse mode, a successful receive string match marks the monitored object down instead of up. You can use the this mode only if you configure the receive option. This parameter is not compatible with the time_until_up parameter. If time_until_up is specified, it must be 0. Or, if it already exists, it must be 0. Choices: false true
sampling_timespan integer	Specifies the length, in seconds, of the probe history window the system uses to calculate the mean latency and standard deviation of a monitor probe. While this value can be configured when adaptive is false, it will not take effect on the system until adaptive is true.
state string	When present, ensures the monitor exists. When absent, ensures the monitor is removed. Choices: "present" ← (default) "absent"
time_until_up integer	Specifies the amount of time in seconds after the first successful response before a node will be marked up. A value of 0 will cause a node to be marked up immediately after a valid response is received from the node. If this parameter is not provided when creating a new monitor, the default value will be 0.
timeout integer	The number of seconds in which the node or service must respond to the monitor request. If the target responds within the set time period, it is considered up. If the target does not respond within the set time period, it is considered down. You can change this to any number, however, it should be 3 times the interval number of seconds plus 1 second. If this parameter is not provided when creating a new monitor, the default value is 16.
transparent boolean	Specifies whether the monitor operates in transparent mode. Monitors in transparent mode can monitor pool members through firewalls. When creating a new monitor, if this parameter is not provided, the default value is false. Choices: false true
up_interval integer	Specifies the interval for the system to use to perform the health check when a resource is up. When 0, specifies the system uses the interval specified in interval to check the health of the resource. When any other number, enables you to specify a different interval to use when checking the health of a resource that is up. When creating a new monitor, if this parameter is not provided, the default 0 is used.

Notes

Note

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a DNS monitor
  bigip_monitor_dns:
    name: DNS-UDP-V6
    interval: 2
    query_name: localhost
    query_type: aaaa
    up_interval: 5
    adaptive: no
    state: present
    provider:
      user: admin
      password: secret
      server: lb.mydomain.com
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
accept_rcode string	RCODE required in the response for an up status. Returned: changed Sample: "no-error"
adaptive boolean	Whether adaptive is enabled or not. Returned: changed Sample: true
adaptive_limit integer	Absolute number of milliseconds that may not be exceeded by a monitor probe. Returned: changed Sample: 200
allowed_divergence_type string	Type of divergence used for adaptive response time monitoring. Returned: changed Sample: "absolute"
allowed_divergence_value integer	Value of the type of divergence used for adaptive response time monitoring. May be percent or ms depending on whether relative or absolute. Returned: changed Sample: 25
answer_section_contains string	Type of DNS query that the monitor sends. Returned: changed Sample: "query-type"
description string	The description of the monitor. Returned: changed Sample: "Important Monitor"
interval integer	The new interval in which to run the monitor check. Returned: changed Sample: 2
ip string	The new IP of IP/port definition. Returned: changed Sample: "10.12.13.14"
manual_resume string	Whether the system automatically changes the status of a resource to enabled at the next successful monitor check. Returned: changed Sample: "query-type"
parent string	New parent template of the monitor. Returned: changed Sample: "http"
port string	Alias port or service for the monitor to check, on behalf of the pools or pool members with which the monitor is associated. Returned: changed Sample: "80"
query_name string	Query name for the monitor to use in a DNS query. Returned: changed Sample: "foo"
query_type string	Type of DNS query the monitor sends. Either a or aaaa. Returned: changed Sample: "aaaa"
receive string	IP address the monitor uses from the resource record sections of the DNS response. Returned: changed Sample: "2.3.2.4"
reverse boolean	Whether the monitor operates in reverse mode. Returned: changed Sample: true
sampling_timespan integer	Absolute number of milliseconds that may not be exceeded by a monitor probe. Returned: changed Sample: 200
time_until_up integer	The new time in which to mark a system as up after first successful response. Returned: changed Sample: 2
timeout integer	The new timeout in which the remote system must respond to the monitor. Returned: changed Sample: 10
transparent boolean	Whether the monitor operates in transparent mode. Returned: changed Sample: false
up_interval integer	Interval for the system to use to perform the health check when a resource is up. Returned: changed Sample: 0

Authors

• Tim Rupp (@caphrim007)

• Wojciech Wypior (@wojtek0806)

Collection links

Issue Tracker Homepage Repository (Sources)