fortinet.fortios.fortios_firewall_consolidated_policy module – Configure consolidated IPv4/IPv6 policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_consolidated_policy.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall_consolidated feature and policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

firewall_consolidated_policy

dictionary

Configure consolidated IPv4/IPv6 policies.

action

string

Policy action (allow/deny/ipsec).

Choices:

  • "accept"

  • "deny"

  • "ipsec"

application_list

string

Name of an existing Application list. Source application.list.name.

auto_asic_offload

string

Enable/disable policy traffic ASIC offloading.

Choices:

  • "enable"

  • "disable"

av_profile

string

Name of an existing Antivirus profile. Source antivirus.profile.name.

captive_portal_exempt

string

Enable exemption of some users from the captive portal.

Choices:

  • "enable"

  • "disable"

cifs_profile

string

Name of an existing CIFS profile. Source cifs.profile.name.

comments

string

Comment.

diffserv_forward

string

Enable to change packet”s DiffServ values to the specified diffservcode-forward value.

Choices:

  • "enable"

  • "disable"

diffserv_reverse

string

Enable to change packet”s reverse (reply) DiffServ values to the specified diffservcode-rev value.

Choices:

  • "enable"

  • "disable"

diffservcode_forward

string

Change packet”s DiffServ to this value.

diffservcode_rev

string

Change packet”s reverse (reply) DiffServ to this value.

dlp_sensor

string

Name of an existing DLP sensor. Source dlp.sensor.name.

dnsfilter_profile

string

Name of an existing DNS filter profile. Source dnsfilter.profile.name.

dstaddr4

list / elements=dictionary

Destination IPv4 address name and address group names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource .name.

dstaddr6

list / elements=dictionary

Destination IPv6 address name and address group names.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system .external-resource.name.

dstaddr_negate

string

When enabled dstaddr specifies what the destination address must NOT be.

Choices:

  • "enable"

  • "disable"

dstintf

list / elements=dictionary

Outgoing (egress) interface.

name

string / required

Interface name. Source system.interface.name system.zone.name.

emailfilter_profile

string

Name of an existing email filter profile. Source emailfilter.profile.name.

fixedport

string

Enable to prevent source NAT from changing a session”s source port.

Choices:

  • "enable"

  • "disable"

fsso_groups

list / elements=dictionary

Names of FSSO groups.

name

string / required

Names of FSSO groups. Source user.adgrp.name.

global_label

string

Label for the policy that appears when the GUI is in Global View mode.

groups

list / elements=dictionary

Names of user groups that can authenticate with this policy.

name

string / required

Group name. Source user.group.name.

http_policy_redirect

string

Redirect HTTP(S) traffic to matching transparent web proxy policy.

Choices:

  • "enable"

  • "disable"

icap_profile

string

Name of an existing ICAP profile. Source icap.profile.name.

inbound

string

Policy-based IPsec VPN: only traffic from the remote network can initiate a VPN.

Choices:

  • "enable"

  • "disable"

inspection_mode

string

Policy inspection mode (Flow/proxy). Default is Flow mode.

Choices:

  • "proxy"

  • "flow"

internet_service

string

Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.

Choices:

  • "enable"

  • "disable"

internet_service_custom

list / elements=dictionary

Custom Internet Service name.

name

string / required

Custom Internet Service name. Source firewall.internet-service-custom.name.

internet_service_custom_group

list / elements=dictionary

Custom Internet Service group name.

name

string / required

Custom Internet Service group name. Source firewall.internet-service-custom-group.name.

internet_service_group

list / elements=dictionary

Internet Service group name.

name

string / required

Internet Service group name. Source firewall.internet-service-group.name.

internet_service_id

list / elements=dictionary

Internet Service ID.

id

integer / required

Internet Service ID. Source firewall.internet-service.id.

internet_service_negate

string

When enabled internet-service specifies what the service must NOT be.

Choices:

  • "enable"

  • "disable"

internet_service_src

string

Enable/disable use of Internet Services in source for this policy. If enabled, source address is not used.

Choices:

  • "enable"

  • "disable"

internet_service_src_custom

list / elements=dictionary

Custom Internet Service source name.

name

string / required

Custom Internet Service name. Source firewall.internet-service-custom.name.

internet_service_src_custom_group

list / elements=dictionary

Custom Internet Service source group name.

name

string / required

Custom Internet Service group name. Source firewall.internet-service-custom-group.name.

internet_service_src_group

list / elements=dictionary

Internet Service source group name.

name

string / required

Internet Service group name. Source firewall.internet-service-group.name.

internet_service_src_id

list / elements=dictionary

Internet Service source ID.

id

integer / required

Internet Service ID. Source firewall.internet-service.id.

internet_service_src_negate

string

When enabled internet-service-src specifies what the service must NOT be.

Choices:

  • "enable"

  • "disable"

ippool

string

Enable to use IP Pools for source NAT.

Choices:

  • "enable"

  • "disable"

ips_sensor

string

Name of an existing IPS sensor. Source ips.sensor.name.

logtraffic

string

Enable or disable logging. Log all sessions or security profile sessions.

Choices:

  • "all"

  • "utm"

  • "disable"

logtraffic_start

string

Record logs when a session starts.

Choices:

  • "enable"

  • "disable"

mms_profile

string

Name of an existing MMS profile. Source firewall.mms-profile.name.

name

string

Policy name.

nat

string

Enable/disable source NAT.

Choices:

  • "enable"

  • "disable"

outbound

string

Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.

Choices:

  • "enable"

  • "disable"

per_ip_shaper

string

Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.

policyid

integer / required

Policy ID (0 - 4294967294).

poolname4

list / elements=dictionary

IPv4 pool names.

name

string / required

IPv4 pool name. Source firewall.ippool.name.

poolname6

list / elements=dictionary

IPv6 pool names.

name

string / required

IPv6 pool name. Source firewall.ippool6.name.

profile_group

string

Name of profile group. Source firewall.profile-group.name.

profile_protocol_options

string

Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.

profile_type

string

Determine whether the firewall policy allows security profile groups or single profiles only.

Choices:

  • "single"

  • "group"

schedule

string

Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.

service

list / elements=dictionary

Service and service group names.

name

string / required

Service name. Source firewall.service.custom.name firewall.service.group.name.

service_negate

string

When enabled service specifies what the service must NOT be.

Choices:

  • "enable"

  • "disable"

session_ttl

integer

TTL in seconds for sessions accepted by this policy (0 means use the system ).

srcaddr4

list / elements=dictionary

Source IPv4 address name and address group names.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name system.external-resource.name.

srcaddr6

list / elements=dictionary

Source IPv6 address name and address group names.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.

srcaddr_negate

string

When enabled srcaddr specifies what the source address must NOT be.

Choices:

  • "enable"

  • "disable"

srcintf

list / elements=dictionary

Incoming (ingress) interface.

name

string / required

Interface name. Source system.interface.name system.zone.name.

ssh_filter_profile

string

Name of an existing SSH filter profile. Source ssh-filter.profile.name.

ssh_policy_redirect

string

Redirect SSH traffic to matching transparent proxy policy.

Choices:

  • "enable"

  • "disable"

ssl_ssh_profile

string

Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.

status

string

Enable or disable this policy.

Choices:

  • "enable"

  • "disable"

tcp_mss_receiver

integer

Receiver TCP maximum segment size (MSS).

tcp_mss_sender

integer

Sender TCP maximum segment size (MSS).

traffic_shaper

string

Traffic shaper. Source firewall.shaper.traffic-shaper.name.

traffic_shaper_reverse

string

Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.

users

list / elements=dictionary

Names of individual users that can authenticate with this policy.

name

string / required

User name. Source user.local.name.

utm_status

string

Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.

Choices:

  • "enable"

  • "disable"

uuid

string

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

voip_profile

string

Name of an existing VoIP profile. Source voip.profile.name.

vpntunnel

string

Policy-based IPsec VPN: name of the IPsec VPN Phase 1. Source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name.

waf_profile

string

Name of an existing Web application firewall profile. Source waf.profile.name.

wanopt

string

Enable/disable WAN optimization.

Choices:

  • "enable"

  • "disable"

wanopt_detection

string

WAN optimization auto-detection mode.

Choices:

  • "active"

  • "passive"

  • "off"

wanopt_passive_opt

string

WAN optimization passive mode options. This option decides what IP address will be used to connect to server.

Choices:

  • "default"

  • "transparent"

  • "non-transparent"

wanopt_peer

string

WAN optimization peer. Source wanopt.peer.peer-host-id.

wanopt_profile

string

WAN optimization profile. Source wanopt.profile.name.

webcache

string

Enable/disable web cache.

Choices:

  • "enable"

  • "disable"

webcache_https

string

Enable/disable web cache for HTTPS.

Choices:

  • "disable"

  • "enable"

webfilter_profile

string

Name of an existing Web filter profile. Source webfilter.profile.name.

webproxy_forward_server

string

Webproxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.

webproxy_profile

string

Webproxy profile name. Source web-proxy.profile.name.

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure consolidated IPv4/IPv6 policies.
    fortios_firewall_consolidated_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_consolidated_policy:
        action: "accept"
        application_list: "<your_own_value> (source application.list.name)"
        auto_asic_offload: "enable"
        av_profile: "<your_own_value> (source antivirus.profile.name)"
        captive_portal_exempt: "enable"
        cifs_profile: "<your_own_value> (source cifs.profile.name)"
        comments: "<your_own_value>"
        diffserv_forward: "enable"
        diffserv_reverse: "enable"
        diffservcode_forward: "<your_own_value>"
        diffservcode_rev: "<your_own_value>"
        dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
        dnsfilter_profile: "<your_own_value> (source dnsfilter.profile.name)"
        dstaddr_negate: "enable"
        dstaddr4:
         -
            name: "default_name_18 (source firewall.address.name firewall.addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource.name)"
        dstaddr6:
         -
            name: "default_name_20 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system.external-resource
              .name)"
        dstintf:
         -
            name: "default_name_22 (source system.interface.name system.zone.name)"
        emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
        fixedport: "enable"
        fsso_groups:
         -
            name: "default_name_26 (source user.adgrp.name)"
        global_label: "<your_own_value>"
        groups:
         -
            name: "default_name_29 (source user.group.name)"
        http_policy_redirect: "enable"
        icap_profile: "<your_own_value> (source icap.profile.name)"
        inbound: "enable"
        inspection_mode: "proxy"
        internet_service: "enable"
        internet_service_custom:
         -
            name: "default_name_36 (source firewall.internet-service-custom.name)"
        internet_service_custom_group:
         -
            name: "default_name_38 (source firewall.internet-service-custom-group.name)"
        internet_service_group:
         -
            name: "default_name_40 (source firewall.internet-service-group.name)"
        internet_service_id:
         -
            id:  "42 (source firewall.internet-service.id)"
        internet_service_negate: "enable"
        internet_service_src: "enable"
        internet_service_src_custom:
         -
            name: "default_name_46 (source firewall.internet-service-custom.name)"
        internet_service_src_custom_group:
         -
            name: "default_name_48 (source firewall.internet-service-custom-group.name)"
        internet_service_src_group:
         -
            name: "default_name_50 (source firewall.internet-service-group.name)"
        internet_service_src_id:
         -
            id:  "52 (source firewall.internet-service.id)"
        internet_service_src_negate: "enable"
        ippool: "enable"
        ips_sensor: "<your_own_value> (source ips.sensor.name)"
        logtraffic: "all"
        logtraffic_start: "enable"
        mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
        name: "default_name_59"
        nat: "enable"
        outbound: "enable"
        per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
        policyid: "2147483647"
        poolname4:
         -
            name: "default_name_65 (source firewall.ippool.name)"
        poolname6:
         -
            name: "default_name_67 (source firewall.ippool6.name)"
        profile_group: "<your_own_value> (source firewall.profile-group.name)"
        profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
        profile_type: "single"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_73 (source firewall.service.custom.name firewall.service.group.name)"
        service_negate: "enable"
        session_ttl: "1382400"
        srcaddr_negate: "enable"
        srcaddr4:
         -
            name: "default_name_78 (source firewall.address.name firewall.addrgrp.name system.external-resource.name)"
        srcaddr6:
         -
            name: "default_name_80 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        srcintf:
         -
            name: "default_name_82 (source system.interface.name system.zone.name)"
        ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
        ssh_policy_redirect: "enable"
        ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        tcp_mss_receiver: "32767"
        tcp_mss_sender: "32767"
        traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        users:
         -
            name: "default_name_92 (source user.local.name)"
        utm_status: "enable"
        uuid: "<your_own_value>"
        voip_profile: "<your_own_value> (source voip.profile.name)"
        vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
        waf_profile: "<your_own_value> (source waf.profile.name)"
        wanopt: "enable"
        wanopt_detection: "active"
        wanopt_passive_opt: "default"
        wanopt_peer: "<your_own_value> (source wanopt.peer.peer-host-id)"
        wanopt_profile: "<your_own_value> (source wanopt.profile.name)"
        webcache: "enable"
        webcache_https: "disable"
        webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
        webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
        webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)