fortinet.fortios.fortios_firewall_policy64 module – Configure IPv6 to IPv4 policies in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy64.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy64 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

firewall_policy64

dictionary

Configure IPv6 to IPv4 policies.

action

string

Policy action.

Choices:

  • "accept"

  • "deny"

comments

string

Comment.

dstaddr

list / elements=dictionary

Destination address name.

name

string / required

Address name. Source firewall.address.name firewall.addrgrp.name firewall.vip64.name firewall.vipgrp64.name.

dstintf

string

Destination interface name. Source system.interface.name system.zone.name.

fixedport

string

Enable/disable policy fixed port.

Choices:

  • "enable"

  • "disable"

ippool

string

Enable/disable policy64 IP pool.

Choices:

  • "enable"

  • "disable"

logtraffic

string

Enable/disable policy log traffic.

Choices:

  • "enable"

  • "disable"

logtraffic_start

string

Record logs when a session starts and ends.

Choices:

  • "enable"

  • "disable"

name

string

Policy name.

per_ip_shaper

string

Per-IP traffic shaper. Source firewall.shaper.per-ip-shaper.name.

permit_any_host

string

Enable/disable permit any host in.

Choices:

  • "enable"

  • "disable"

policyid

integer / required

Policy ID (0 - 4294967294).

poolname

list / elements=dictionary

Policy IP pool names.

name

string / required

IP pool name. Source firewall.ippool.name.

schedule

string

Schedule name. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.

service

list / elements=dictionary

Service name.

name

string / required

Address name. Source firewall.service.custom.name firewall.service.group.name.

srcaddr

list / elements=dictionary

Source address name.

name

string / required

Address name. Source firewall.address6.name firewall.addrgrp6.name.

srcintf

string

Source interface name. Source system.zone.name system.interface.name.

status

string

Enable/disable policy status.

Choices:

  • "enable"

  • "disable"

tcp_mss_receiver

integer

TCP MSS value of receiver.

tcp_mss_sender

integer

TCP MSS value of sender.

traffic_shaper

string

Traffic shaper. Source firewall.shaper.traffic-shaper.name.

traffic_shaper_reverse

string

Reverse traffic shaper. Source firewall.shaper.traffic-shaper.name.

uuid

string

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure IPv6 to IPv4 policies.
    fortios_firewall_policy64:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_policy64:
        action: "accept"
        comments: "<your_own_value>"
        dstaddr:
         -
            name: "default_name_6 (source firewall.address.name firewall.addrgrp.name firewall.vip64.name firewall.vipgrp64.name)"
        dstintf: "<your_own_value> (source system.interface.name system.zone.name)"
        fixedport: "enable"
        ippool: "enable"
        logtraffic: "enable"
        logtraffic_start: "enable"
        name: "default_name_12"
        per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
        permit_any_host: "enable"
        policyid: "0"
        poolname:
         -
            name: "default_name_17 (source firewall.ippool.name)"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_20 (source firewall.service.custom.name firewall.service.group.name)"
        srcaddr:
         -
            name: "default_name_22 (source firewall.address6.name firewall.addrgrp6.name)"
        srcintf: "<your_own_value> (source system.zone.name system.interface.name)"
        status: "enable"
        tcp_mss_receiver: "0"
        tcp_mss_sender: "0"
        traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
        uuid: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)