fortinet.fortios.fortios_firewall_proxy_policy module – Configure proxy policies in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_proxy_policy
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and proxy_policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.9
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Configure proxy policies. |
|
IPv4 access proxy. |
|
Access Proxy name. Source firewall.access-proxy.name. |
|
IPv6 access proxy. |
|
Access proxy name. Source firewall.access-proxy6.name. |
|
Accept or deny traffic matching the policy parameters. Choices:
|
|
Name of an existing Application list. Source application.list.name. |
|
Name of an existing Antivirus profile. Source antivirus.profile.name. |
|
Enable/disable block notification. Choices:
|
|
Name of an existing CIFS profile. Source cifs.profile.name. |
|
Optional comments. |
|
Decrypted traffic mirror. Source firewall.decrypted-traffic-mirror.name. |
|
When enabled, the ownership enforcement will be done at policy level. Choices:
|
|
Web proxy disclaimer setting: by domain, policy, or user. Choices:
|
|
Name of an existing DLP profile. Source dlp.profile.name. |
|
Name of an existing DLP sensor. Source dlp.sensor.name. |
|
Destination address objects. |
|
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip.name firewall.vipgrp.name system.external-resource.name. |
|
IPv6 destination address objects. |
|
Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system .external-resource.name. |
|
When enabled, destination addresses match against any address EXCEPT the specified destination addresses. Choices:
|
|
Destination interface names. |
|
Interface name. Source system.interface.name system.zone.name system.sdwan.zone.name. |
|
Name of an existing email filter profile. Source emailfilter.profile.name. |
|
Name of an existing file-filter profile. Source file-filter.profile.name. |
|
Global web-based manager visible label. |
|
Names of group objects. |
|
Group name. Source user.group.name. |
|
Enable/disable HTTP tunnel authentication. Choices:
|
|
Name of an existing ICAP profile. Source icap.profile.name. |
|
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used. Choices:
|
|
Enable/disable use of Internet Services IPv6 for this policy. If enabled, destination IPv6 address and service are not used. Choices:
|
|
Custom Internet Service IPv6 name. |
|
Custom Internet Service IPv6 name. Source firewall.internet-service-custom.name. |
|
Custom Internet Service IPv6 group name. |
|
Custom Internet Service IPv6 group name. Source firewall.internet-service-custom-group.name. |
|
Internet Service IPv6 group name. |
|
Internet Service IPv6 group name. Source firewall.internet-service-group.name. |
|
Internet Service IPv6 name. |
|
Internet Service IPv6 name. Source firewall.internet-service-name.name. |
|
When enabled, Internet Services match against any internet service IPv6 EXCEPT the selected Internet Service IPv6. Choices:
|
|
Custom Internet Service name. |
|
Custom Internet Service name. Source firewall.internet-service-custom.name. |
|
Custom Internet Service group name. |
|
Custom Internet Service group name. Source firewall.internet-service-custom-group.name. |
|
Internet Service group name. |
|
Internet Service group name. Source firewall.internet-service-group.name. |
|
Internet Service ID. |
|
Internet Service ID. Source firewall.internet-service.id. |
|
Internet Service name. |
|
Internet Service name. Source firewall.internet-service-name.name. |
|
When enabled, Internet Services match against any internet service EXCEPT the selected Internet Service. Choices:
|
|
Name of an existing IPS sensor. Source ips.sensor.name. |
|
Name of an existing VoIP (ips) profile. Source voip.profile.name. |
|
VDOM-specific GUI visible label. |
|
Enable/disable logging traffic through the policy. Choices:
|
|
Enable/disable policy log traffic start. Choices:
|
|
Name of an existing MMS profile. Source firewall.mms-profile.name. |
|
Policy name. |
|
Policy ID. |
|
Name of IP pool object. |
|
IP pool name. Source firewall.ippool.name. |
|
Name of profile group. Source firewall.profile-group.name. |
|
Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name. |
|
Determine whether the firewall policy allows security profile groups or single profiles only. Choices:
|
|
Type of explicit proxy. Choices:
|
|
Redirect URL for further explicit web proxy processing. |
|
Authentication replacement message override group. Source system.replacemsg-group.name. |
|
Enable/disable scanning of connections to Botnet servers. Choices:
|
|
Name of schedule object. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name. |
|
Name of an existing SCTP filter profile. Source sctp-filter.profile.name. |
|
Name of service objects. |
|
Service name. Source firewall.service.custom.name firewall.service.group.name. |
|
When enabled, services match against any service EXCEPT the specified destination services. Choices:
|
|
TTL in seconds for sessions accepted by this policy (0 means use the system ). |
|
Name of an existing Spam filter profile. Source spamfilter.profile.name. |
|
Source address objects. |
|
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system .external-resource.name. |
|
IPv6 source address objects. |
|
Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name. |
|
When enabled, source addresses match against any address EXCEPT the specified source addresses. Choices:
|
|
Source interface names. |
|
Interface name. Source system.interface.name system.zone.name system.sdwan.zone.name. |
|
Name of an existing SSH filter profile. Source ssh-filter.profile.name. |
|
Redirect SSH traffic to matching transparent proxy policy. Choices:
|
|
Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name. |
|
Enable/disable the active status of the policy. Choices:
|
|
Enable to use the IP address of the client to connect to the server. Choices:
|
|
Names of user objects. |
|
Group name. Source user.local.name user.certificate.name. |
|
Enable the use of UTM profiles/sensors/lists. Choices:
|
|
Universally Unique Identifier (UUID; automatically assigned but can be manually reset). |
|
Name of an existing VideoFilter profile. Source videofilter.profile.name. |
|
Name of an existing VoIP profile. Source voip.profile.name. |
|
Name of an existing Web application firewall profile. Source waf.profile.name. |
|
Enable/disable web caching. Choices:
|
|
Enable/disable web caching for HTTPS (Requires deep-inspection enabled in ssl-ssh-profile). Choices:
|
|
Name of an existing Web filter profile. Source webfilter.profile.name. |
|
Web proxy forward server name. Source web-proxy.forward-server.name web-proxy.forward-server-group.name. |
|
Name of web proxy profile. Source web-proxy.profile.name. |
|
ZTNA EMS Tag names. |
|
EMS Tag name. Source firewall.address.name firewall.addrgrp.name. |
|
ZTNA tag matching logic. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure proxy policies.
fortios_firewall_proxy_policy:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_proxy_policy:
access_proxy:
-
name: "default_name_4 (source firewall.access-proxy.name)"
access_proxy6:
-
name: "default_name_6 (source firewall.access-proxy6.name)"
action: "accept"
application_list: "<your_own_value> (source application.list.name)"
av_profile: "<your_own_value> (source antivirus.profile.name)"
block_notification: "enable"
cifs_profile: "<your_own_value> (source cifs.profile.name)"
comments: "<your_own_value>"
decrypted_traffic_mirror: "<your_own_value> (source firewall.decrypted-traffic-mirror.name)"
device_ownership: "enable"
disclaimer: "disable"
dlp_profile: "<your_own_value> (source dlp.profile.name)"
dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
dstaddr:
-
name: "default_name_19 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip
.name firewall.vipgrp.name system.external-resource.name)"
dstaddr_negate: "enable"
dstaddr6:
-
name: "default_name_22 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name system.external-resource
.name)"
dstintf:
-
name: "default_name_24 (source system.interface.name system.zone.name system.sdwan.zone.name)"
emailfilter_profile: "<your_own_value> (source emailfilter.profile.name)"
file_filter_profile: "<your_own_value> (source file-filter.profile.name)"
global_label: "<your_own_value>"
groups:
-
name: "default_name_29 (source user.group.name)"
http_tunnel_auth: "enable"
icap_profile: "<your_own_value> (source icap.profile.name)"
internet_service: "enable"
internet_service_custom:
-
name: "default_name_34 (source firewall.internet-service-custom.name)"
internet_service_custom_group:
-
name: "default_name_36 (source firewall.internet-service-custom-group.name)"
internet_service_group:
-
name: "default_name_38 (source firewall.internet-service-group.name)"
internet_service_id:
-
id: "40 (source firewall.internet-service.id)"
internet_service_name:
-
name: "default_name_42 (source firewall.internet-service-name.name)"
internet_service_negate: "enable"
internet_service6: "enable"
internet_service6_custom:
-
name: "default_name_46 (source firewall.internet-service-custom.name)"
internet_service6_custom_group:
-
name: "default_name_48 (source firewall.internet-service-custom-group.name)"
internet_service6_group:
-
name: "default_name_50 (source firewall.internet-service-group.name)"
internet_service6_name:
-
name: "default_name_52 (source firewall.internet-service-name.name)"
internet_service6_negate: "enable"
ips_sensor: "<your_own_value> (source ips.sensor.name)"
ips_voip_filter: "<your_own_value> (source voip.profile.name)"
label: "<your_own_value>"
logtraffic: "all"
logtraffic_start: "enable"
mms_profile: "<your_own_value> (source firewall.mms-profile.name)"
name: "default_name_60"
policyid: "0"
poolname:
-
name: "default_name_63 (source firewall.ippool.name)"
profile_group: "<your_own_value> (source firewall.profile-group.name)"
profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
profile_type: "single"
proxy: "explicit-web"
redirect_url: "<your_own_value>"
replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
scan_botnet_connections: "disable"
schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
sctp_filter_profile: "<your_own_value> (source sctp-filter.profile.name)"
service:
-
name: "default_name_74 (source firewall.service.custom.name firewall.service.group.name)"
service_negate: "enable"
session_ttl: "0"
spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
srcaddr:
-
name: "default_name_79 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system
.external-resource.name)"
srcaddr_negate: "enable"
srcaddr6:
-
name: "default_name_82 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
srcintf:
-
name: "default_name_84 (source system.interface.name system.zone.name system.sdwan.zone.name)"
ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
ssh_policy_redirect: "enable"
ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
status: "enable"
transparent: "enable"
users:
-
name: "default_name_91 (source user.local.name user.certificate.name)"
utm_status: "enable"
uuid: "<your_own_value>"
videofilter_profile: "<your_own_value> (source videofilter.profile.name)"
voip_profile: "<your_own_value> (source voip.profile.name)"
waf_profile: "<your_own_value> (source waf.profile.name)"
webcache: "enable"
webcache_https: "disable"
webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"
ztna_ems_tag:
-
name: "default_name_103 (source firewall.address.name firewall.addrgrp.name)"
ztna_tags_match_logic: "or"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |