fortinet.fortios.fortios_wireless_controller_wtp_profile module – Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms in Fortinet’s FortiOS and FortiGate.

Note

This module is part of the fortinet.fortios collection (version 2.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_wtp_profile.

New in fortinet.fortios 2.0.0

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and wtp_profile category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • false ← (default)

  • true

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • "present"

  • "absent"

state

string / required

Indicates whether to create or remove the object.

Choices:

  • "present"

  • "absent"

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: "root"

wireless_controller_wtp_profile

dictionary

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

allowaccess

list / elements=string

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

Choices:

  • "https"

  • "ssh"

  • "snmp"

  • "telnet"

  • "http"

ap_country

string

Country in which this WTP, FortiAP, or AP will operate .

Choices:

  • "--"

  • "AF"

  • "AL"

  • "DZ"

  • "AS"

  • "AO"

  • "AR"

  • "AM"

  • "AU"

  • "AT"

  • "AZ"

  • "BS"

  • "BH"

  • "BD"

  • "BB"

  • "BY"

  • "BE"

  • "BZ"

  • "BJ"

  • "BM"

  • "BT"

  • "BO"

  • "BA"

  • "BW"

  • "BR"

  • "BN"

  • "BG"

  • "BF"

  • "KH"

  • "CM"

  • "KY"

  • "CF"

  • "TD"

  • "CL"

  • "CN"

  • "CX"

  • "CO"

  • "CG"

  • "CD"

  • "CR"

  • "HR"

  • "CY"

  • "CZ"

  • "DK"

  • "DM"

  • "DO"

  • "EC"

  • "EG"

  • "SV"

  • "ET"

  • "EE"

  • "GF"

  • "PF"

  • "FO"

  • "FJ"

  • "FI"

  • "FR"

  • "GE"

  • "DE"

  • "GH"

  • "GI"

  • "GR"

  • "GL"

  • "GD"

  • "GP"

  • "GU"

  • "GT"

  • "GY"

  • "HT"

  • "HN"

  • "HK"

  • "HU"

  • "IS"

  • "IN"

  • "ID"

  • "IQ"

  • "IE"

  • "IM"

  • "IL"

  • "IT"

  • "CI"

  • "JM"

  • "JO"

  • "KZ"

  • "KE"

  • "KR"

  • "KW"

  • "LA"

  • "LV"

  • "LB"

  • "LS"

  • "LY"

  • "LI"

  • "LT"

  • "LU"

  • "MO"

  • "MK"

  • "MG"

  • "MW"

  • "MY"

  • "MV"

  • "ML"

  • "MT"

  • "MH"

  • "MQ"

  • "MR"

  • "MU"

  • "YT"

  • "MX"

  • "FM"

  • "MD"

  • "MC"

  • "MN"

  • "MA"

  • "MZ"

  • "MM"

  • "NA"

  • "NP"

  • "NL"

  • "AN"

  • "AW"

  • "NZ"

  • "NI"

  • "NE"

  • "NO"

  • "MP"

  • "OM"

  • "PK"

  • "PW"

  • "PA"

  • "PG"

  • "PY"

  • "PE"

  • "PH"

  • "PL"

  • "PT"

  • "PR"

  • "QA"

  • "RE"

  • "RO"

  • "RU"

  • "RW"

  • "BL"

  • "KN"

  • "LC"

  • "MF"

  • "PM"

  • "VC"

  • "SA"

  • "SN"

  • "RS"

  • "ME"

  • "SL"

  • "SG"

  • "SK"

  • "SI"

  • "ZA"

  • "ES"

  • "LK"

  • "SE"

  • "SR"

  • "CH"

  • "TW"

  • "TZ"

  • "TH"

  • "TG"

  • "TT"

  • "TN"

  • "TR"

  • "TM"

  • "AE"

  • "TC"

  • "UG"

  • "UA"

  • "GB"

  • "US"

  • "PS"

  • "UY"

  • "UZ"

  • "VU"

  • "VE"

  • "VN"

  • "VI"

  • "WF"

  • "YE"

  • "ZM"

  • "ZW"

  • "JP"

  • "CA"

  • "IR"

  • "KP"

  • "SD"

  • "SY"

  • "ZB"

ap_handoff

string

Enable/disable AP handoff of clients to other APs .

Choices:

  • "enable"

  • "disable"

apcfg_profile

string

AP local configuration profile name. Source wireless-controller.apcfg-profile.name.

ble_profile

string

Bluetooth Low Energy profile name. Source wireless-controller.ble-profile.name.

comment

string

Comment.

console_login

string

Enable/disable FortiAP console login access .

Choices:

  • "enable"

  • "disable"

control_message_offload

list / elements=string

Enable/disable CAPWAP control message data channel offload.

Choices:

  • "ebp-frame"

  • "aeroscout-tag"

  • "ap-list"

  • "sta-list"

  • "sta-cap-list"

  • "stats"

  • "aeroscout-mu"

  • "sta-health"

  • "spectral-analysis"

deny_mac_list

list / elements=dictionary

List of MAC addresses that are denied access to this WTP, FortiAP, or AP.

id

integer / required

ID.

mac

string

A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP.

dtls_in_kernel

string

Enable/disable data channel DTLS in kernel.

Choices:

  • "enable"

  • "disable"

dtls_policy

list / elements=string

WTP data channel DTLS policy .

Choices:

  • "clear-text"

  • "dtls-enabled"

  • "ipsec-vpn"

  • "ipsec-sn-vpn"

energy_efficient_ethernet

string

Enable/disable use of energy efficient Ethernet on WTP.

Choices:

  • "enable"

  • "disable"

esl_ses_dongle

dictionary

ESL SES-imagotag dongle configuration.

apc_addr_type

string

ESL SES-imagotag APC address type .

Choices:

  • "fqdn"

  • "ip"

apc_fqdn

string

FQDN of ESL SES-imagotag Access Point Controller (APC).

apc_ip

string

IP address of ESL SES-imagotag Access Point Controller (APC).

apc_port

integer

Port of ESL SES-imagotag Access Point Controller (APC).

coex_level

string

ESL SES-imagotag dongle coexistence level .

Choices:

  • "none"

compliance_level

string

Compliance levels for the ESL solution integration .

Choices:

  • "compliance-level-2"

esl_channel

string

ESL SES-imagotag dongle channel .

Choices:

  • "-1"

  • "0"

  • "1"

  • "2"

  • "3"

  • "4"

  • "5"

  • "6"

  • "7"

  • "8"

  • "9"

  • "10"

  • "127"

output_power

string

ESL SES-imagotag dongle output power .

Choices:

  • "a"

  • "b"

  • "c"

  • "d"

  • "e"

  • "f"

  • "g"

  • "h"

scd_enable

string

Enable/disable ESL SES-imagotag Serial Communication Daemon (SCD) .

Choices:

  • "enable"

  • "disable"

tls_cert_verification

string

Enable/disable TLS certificate verification .

Choices:

  • "enable"

  • "disable"

tls_fqdn_verification

string

Enable/disable TLS certificate verification .

Choices:

  • "enable"

  • "disable"

ext_info_enable

string

Enable/disable station/VAP/radio extension information.

Choices:

  • "enable"

  • "disable"

frequency_handoff

string

Enable/disable frequency handoff of clients to other channels .

Choices:

  • "enable"

  • "disable"

handoff_roaming

string

Enable/disable client load balancing during roaming to avoid roaming delay .

Choices:

  • "enable"

  • "disable"

handoff_rssi

integer

Minimum received signal strength indicator (RSSI) value for handoff (20 - 30).

handoff_sta_thresh

integer

Threshold value for AP handoff.

indoor_outdoor_deployment

string

Set to allow indoor/outdoor-only channels under regulatory rules .

Choices:

  • "platform-determined"

  • "outdoor"

  • "indoor"

ip_fragment_preventing

list / elements=string

Method(s) by which IP fragmentation is prevented for control and data packets through CAPWAP tunnel .

Choices:

  • "tcp-mss-adjust"

  • "icmp-unreachable"

lan

dictionary

WTP LAN port mapping.

port1_mode

string

LAN port 1 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port1_ssid

string

Bridge LAN port 1 to SSID. Source system.interface.name.

port2_mode

string

LAN port 2 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port2_ssid

string

Bridge LAN port 2 to SSID. Source system.interface.name.

port3_mode

string

LAN port 3 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port3_ssid

string

Bridge LAN port 3 to SSID. Source system.interface.name.

port4_mode

string

LAN port 4 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port4_ssid

string

Bridge LAN port 4 to SSID. Source system.interface.name.

port5_mode

string

LAN port 5 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port5_ssid

string

Bridge LAN port 5 to SSID. Source system.interface.name.

port6_mode

string

LAN port 6 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port6_ssid

string

Bridge LAN port 6 to SSID. Source system.interface.name.

port7_mode

string

LAN port 7 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port7_ssid

string

Bridge LAN port 7 to SSID. Source system.interface.name.

port8_mode

string

LAN port 8 mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port8_ssid

string

Bridge LAN port 8 to SSID. Source system.interface.name.

port_esl_mode

string

ESL port mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port_esl_ssid

string

Bridge ESL port to SSID. Source system.interface.name.

port_mode

string

LAN port mode.

Choices:

  • "offline"

  • "nat-to-wan"

  • "bridge-to-wan"

  • "bridge-to-ssid"

port_ssid

string

Bridge LAN port to SSID. Source system.interface.name.

lbs

dictionary

Set various location based service (LBS) options.

aeroscout

string

Enable/disable AeroScout Real Time Location Service (RTLS) support .

Choices:

  • "enable"

  • "disable"

aeroscout_ap_mac

string

Use BSSID or board MAC address as AP MAC address in AeroScout AP messages .

Choices:

  • "bssid"

  • "board-mac"

aeroscout_mmu_report

string

Enable/disable compounded AeroScout tag and MU report .

Choices:

  • "enable"

  • "disable"

aeroscout_mu

string

Enable/disable AeroScout Mobile Unit (MU) support .

Choices:

  • "enable"

  • "disable"

aeroscout_mu_factor

integer

AeroScout MU mode dilution factor .

aeroscout_mu_timeout

integer

AeroScout MU mode timeout (0 - 65535 sec).

aeroscout_server_ip

string

IP address of AeroScout server.

aeroscout_server_port

integer

AeroScout server UDP listening port.

string

Enable/disable Ekahau blink mode (now known as AiRISTA Flow) to track and locate WiFi tags .

Choices:

  • "enable"

  • "disable"

ekahau_tag

string

WiFi frame MAC address or WiFi Tag.

erc_server_ip

string

IP address of Ekahau RTLS Controller (ERC).

erc_server_port

integer

Ekahau RTLS Controller (ERC) UDP listening port.

fortipresence

string

Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don”t connect to this WiFi network .

Choices:

  • "foreign"

  • "both"

  • "disable"

fortipresence_ble

string

Enable/disable FortiPresence finding and reporting BLE devices.

Choices:

  • "enable"

  • "disable"

fortipresence_frequency

integer

FortiPresence report transmit frequency (5 - 65535 sec).

fortipresence_port

integer

UDP listening port of FortiPresence server .

fortipresence_project

string

FortiPresence project name (max. 16 characters).

fortipresence_rogue

string

Enable/disable FortiPresence finding and reporting rogue APs.

Choices:

  • "enable"

  • "disable"

fortipresence_secret

string

FortiPresence secret password (max. 16 characters).

fortipresence_server

string

IP address of FortiPresence server.

fortipresence_server_addr_type

string

FortiPresence server address type .

Choices:

  • "ipv4"

  • "fqdn"

fortipresence_server_fqdn

string

FQDN of FortiPresence server.

fortipresence_unassoc

string

Enable/disable FortiPresence finding and reporting unassociated stations.

Choices:

  • "enable"

  • "disable"

station_locate

string

Enable/disable client station locating services for all clients, whether associated or not .

Choices:

  • "enable"

  • "disable"

led_schedules

list / elements=dictionary

Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.

name

string / required

Schedule name. Source firewall.schedule.group.name firewall.schedule.recurring.name firewall.schedule.onetime.name.

led_state

string

Enable/disable use of LEDs on WTP .

Choices:

  • "enable"

  • "disable"

lldp

string

Enable/disable Link Layer Discovery Protocol (LLDP) for the WTP, FortiAP, or AP .

Choices:

  • "enable"

  • "disable"

login_passwd

string

Set the managed WTP, FortiAP, or AP”s administrator password.

login_passwd_change

string

Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no).

Choices:

  • "yes"

  • "default"

  • "no"

max_clients

integer

Maximum number of stations (STAs) supported by the WTP .

name

string / required

WTP (or FortiAP or AP) profile name.

platform

dictionary

WTP, FortiAP, or AP platform.

ddscan

string

Enable/disable use of one radio for dedicated full-band scanning to detect RF characterization and wireless threat management.

Choices:

  • "enable"

  • "disable"

mode

string

Configure operation mode of 5G radios .

Choices:

  • "single-5G"

  • "dual-5G"

type

string

WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.

Choices:

  • "AP-11N"

  • "C24JE"

  • "421E"

  • "423E"

  • "221E"

  • "222E"

  • "223E"

  • "224E"

  • "231E"

  • "321E"

  • "431F"

  • "431FL"

  • "432F"

  • "432FR"

  • "433F"

  • "433FL"

  • "231F"

  • "231FL"

  • "234F"

  • "23JF"

  • "831F"

  • "231G"

  • "233G"

  • "234G"

  • "431G"

  • "433G"

  • "U421E"

  • "U422EV"

  • "U423E"

  • "U221EV"

  • "U223EV"

  • "U24JEV"

  • "U321EV"

  • "U323EV"

  • "U431F"

  • "U433F"

  • "U231F"

  • "U234F"

  • "U432F"

  • "U231G"

  • "220B"

  • "210B"

  • "222B"

  • "112B"

  • "320B"

  • "11C"

  • "14C"

  • "223B"

  • "28C"

  • "320C"

  • "221C"

  • "25D"

  • "222C"

  • "224D"

  • "214B"

  • "21D"

  • "24D"

  • "112D"

  • "223C"

  • "321C"

  • "C220C"

  • "C225C"

  • "C23JD"

  • "S321C"

  • "S322C"

  • "S323C"

  • "S311C"

  • "S313C"

  • "S321CR"

  • "S322CR"

  • "S323CR"

  • "S421E"

  • "S422E"

  • "S423E"

  • "S221E"

  • "S223E"

  • "U441G"

poe_mode

string

Set the WTP, FortiAP, or AP”s PoE mode.

Choices:

  • "auto"

  • "8023af"

  • "8023at"

  • "power-adapter"

  • "full"

  • "high"

  • "low"

radio_1

dictionary

Configuration options for radio 1.

airtime_fairness

string

Enable/disable airtime fairness .

Choices:

  • "enable"

  • "disable"

amsdu

string

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

Choices:

  • "enable"

  • "disable"

ap_handoff

string

Enable/disable AP handoff of clients to other APs .

Choices:

  • "enable"

  • "disable"

ap_sniffer_addr

string

MAC address to monitor.

ap_sniffer_bufsize

integer

Sniffer buffer size (1 - 32 MB).

ap_sniffer_chan

integer

Channel on which to operate the sniffer .

ap_sniffer_ctl

string

Enable/disable sniffer on WiFi control frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_data

string

Enable/disable sniffer on WiFi data frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_beacon

string

Enable/disable sniffer on WiFi management Beacon frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_other

string

Enable/disable sniffer on WiFi management other frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_probe

string

Enable/disable sniffer on WiFi management probe frames .

Choices:

  • "enable"

  • "disable"

arrp_profile

string

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio. Source wireless-controller .arrp-profile.name.

auto_power_high

integer

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_level

string

Enable/disable automatic power-level adjustment to prevent co-channel interference .

Choices:

  • "enable"

  • "disable"

auto_power_low

integer

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_target

string

Target of automatic transmit power adjustment in dBm (-95 to -20).

band

string

WiFi band that Radio 1 operates on.

Choices:

  • "802.11a"

  • "802.11b"

  • "802.11g"

  • "802.11n"

  • "802.11n-5G"

  • "802.11ac"

  • "802.11ax-5G"

  • "802.11ax"

  • "802.11ac-2G"

  • "802.11ax-6G"

  • "802.11n,g-only"

  • "802.11g-only"

  • "802.11n-only"

  • "802.11n-5G-only"

  • "802.11ac,n-only"

  • "802.11ac-only"

  • "802.11ax,ac-only"

  • "802.11ax,ac,n-only"

  • "802.11ax-5G-only"

  • "802.11ax,n-only"

  • "802.11ax,n,g-only"

  • "802.11ax-only"

band_5g_type

string

WiFi 5G band type.

Choices:

  • "5g-full"

  • "5g-high"

  • "5g-low"

bandwidth_admission_control

string

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

Choices:

  • "enable"

  • "disable"

bandwidth_capacity

integer

Maximum bandwidth capacity allowed (1 - 600000 Kbps).

beacon_interval

integer

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

bss_color

integer

BSS color value for this 11ax radio (0 - 63, disable = 0).

bss_color_mode

string

BSS color mode for this 11ax radio .

Choices:

  • "auto"

  • "static"

call_admission_control

string

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

Choices:

  • "enable"

  • "disable"

call_capacity

integer

Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60).

channel

list / elements=dictionary

Selected list of wireless radio channels.

chan

string / required

Channel number.

channel_bonding

string

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

Choices:

  • "160MHz"

  • "80MHz"

  • "40MHz"

  • "20MHz"

channel_utilization

string

Enable/disable measuring channel utilization.

Choices:

  • "enable"

  • "disable"

coexistence

string

Enable/disable allowing both HT20 and HT40 on the same radio .

Choices:

  • "enable"

  • "disable"

darrp

string

Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel .

Choices:

  • "enable"

  • "disable"

drma

string

Enable/disable dynamic radio mode assignment (DRMA) .

Choices:

  • "disable"

  • "enable"

drma_sensitivity

string

Network Coverage Factor (NCF) percentage required to consider a radio as redundant .

Choices:

  • "low"

  • "medium"

  • "high"

dtim

integer

Delivery Traffic Indication Map (DTIM) period (1 - 255). Set higher to save battery life of WiFi client in power-save mode.

frag_threshold

integer

Maximum packet size that can be sent without fragmentation (800 - 2346 bytes).

frequency_handoff

string

Enable/disable frequency handoff of clients to other channels .

Choices:

  • "enable"

  • "disable"

iperf_protocol

string

Iperf test protocol .

Choices:

  • "udp"

  • "tcp"

iperf_server_port

integer

Iperf service port number.

max_clients

integer

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

max_distance

integer

Maximum expected distance between the AP and clients (0 - 54000 m).

mode

string

Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

Choices:

  • "disabled"

  • "ap"

  • "monitor"

  • "sniffer"

  • "sam"

optional_antenna

string

Optional antenna used on FAP .

Choices:

  • "none"

  • "FANT-04ABGN-0606-O-N"

  • "FANT-04ABGN-1414-P-N"

  • "FANT-04ABGN-8065-P-N"

  • "FANT-04ABGN-0606-O-R"

  • "FANT-04ABGN-0606-P-R"

  • "FANT-10ACAX-1213-D-N"

  • "FANT-08ABGN-1213-D-R"

power_level

integer

Radio EIRP power level as a percentage of the maximum EIRP power (0 - 100).

power_mode

string

Set radio effective isotropic radiated power (EIRP) in dBm or by a percentage of the maximum EIRP . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

Choices:

  • "dBm"

  • "percentage"

power_value

integer

Radio EIRP power in dBm (1 - 33).

powersave_optimize

list / elements=string

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

Choices:

  • "tim"

  • "ac-vo"

  • "no-obss-scan"

  • "no-11b-rate"

  • "client-rate-follow"

protection_mode

string

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

Choices:

  • "rtscts"

  • "ctsonly"

  • "disable"

radio_id

integer

radio-id

rts_threshold

integer

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes).

sam_bssid

string

BSSID for WiFi network.

sam_captive_portal

string

Enable/disable Captive Portal Authentication .

Choices:

  • "enable"

  • "disable"

sam_cwp_failure_string

string

Failure identification on the page after an incorrect login.

sam_cwp_match_string

string

Identification string from the captive portal login form.

sam_cwp_password

string

Password for captive portal authentication.

sam_cwp_success_string

string

Success identification on the page after a successful login.

sam_cwp_test_url

string

Website the client is trying to access.

sam_cwp_username

string

Username for captive portal authentication.

sam_password

string

Passphrase for WiFi network connection.

sam_report_intv

integer

SAM report interval (sec), 0 for a one-time report.

sam_security_type

string

Select WiFi network security type .

Choices:

  • "open"

  • "wpa-personal"

  • "wpa-enterprise"

sam_server

string

SAM test server IP address or domain name.

sam_server_fqdn

string

SAM test server domain name.

sam_server_ip

string

SAM test server IP address.

sam_server_type

string

Select SAM server type .

Choices:

  • "ip"

  • "fqdn"

sam_ssid

string

SSID for WiFi network.

sam_test

string

Select SAM test type .

Choices:

  • "ping"

  • "iperf"

sam_username

string

Username for WiFi network connection.

set_80211d

string

Enable/disable 802.11d countryie.

Choices:

  • "enable"

  • "disable"

short_guard_interval

string

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

Choices:

  • "enable"

  • "disable"

spectrum_analysis

string

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

Choices:

  • "enable"

  • "scan-only"

  • "disable"

transmit_optimize

list / elements=string

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

Choices:

  • "disable"

  • "power-save"

  • "aggr-limit"

  • "retry-limit"

  • "send-bar"

vap_all

string

Configure method for assigning SSIDs to this FortiAP .

Choices:

  • "tunnel"

  • "bridge"

  • "manual"

  • "enable"

  • "disable"

vaps

list / elements=dictionary

Manually selected list of Virtual Access Points (VAPs).

name

string / required

Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name system.interface.name.

wids_profile

string

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name.

zero_wait_dfs

string

Enable/disable zero wait DFS on radio .

Choices:

  • "enable"

  • "disable"

radio_2

dictionary

Configuration options for radio 2.

airtime_fairness

string

Enable/disable airtime fairness .

Choices:

  • "enable"

  • "disable"

amsdu

string

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

Choices:

  • "enable"

  • "disable"

ap_handoff

string

Enable/disable AP handoff of clients to other APs .

Choices:

  • "enable"

  • "disable"

ap_sniffer_addr

string

MAC address to monitor.

ap_sniffer_bufsize

integer

Sniffer buffer size (1 - 32 MB).

ap_sniffer_chan

integer

Channel on which to operate the sniffer .

ap_sniffer_ctl

string

Enable/disable sniffer on WiFi control frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_data

string

Enable/disable sniffer on WiFi data frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_beacon

string

Enable/disable sniffer on WiFi management Beacon frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_other

string

Enable/disable sniffer on WiFi management other frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_probe

string

Enable/disable sniffer on WiFi management probe frames .

Choices:

  • "enable"

  • "disable"

arrp_profile

string

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio. Source wireless-controller .arrp-profile.name.

auto_power_high

integer

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_level

string

Enable/disable automatic power-level adjustment to prevent co-channel interference .

Choices:

  • "enable"

  • "disable"

auto_power_low

integer

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_target

string

Target of automatic transmit power adjustment in dBm (-95 to -20).

band

string

WiFi band that Radio 2 operates on.

Choices:

  • "802.11a"

  • "802.11b"

  • "802.11g"

  • "802.11n"

  • "802.11n-5G"

  • "802.11ac"

  • "802.11ax-5G"

  • "802.11ax"

  • "802.11ac-2G"

  • "802.11ax-6G"

  • "802.11n,g-only"

  • "802.11g-only"

  • "802.11n-only"

  • "802.11n-5G-only"

  • "802.11ac,n-only"

  • "802.11ac-only"

  • "802.11ax,ac-only"

  • "802.11ax,ac,n-only"

  • "802.11ax-5G-only"

  • "802.11ax,n-only"

  • "802.11ax,n,g-only"

  • "802.11ax-only"

band_5g_type

string

WiFi 5G band type.

Choices:

  • "5g-full"

  • "5g-high"

  • "5g-low"

bandwidth_admission_control

string

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

Choices:

  • "enable"

  • "disable"

bandwidth_capacity

integer

Maximum bandwidth capacity allowed (1 - 600000 Kbps).

beacon_interval

integer

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

bss_color

integer

BSS color value for this 11ax radio (0 - 63, disable = 0).

bss_color_mode

string

BSS color mode for this 11ax radio .

Choices:

  • "auto"

  • "static"

call_admission_control

string

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

Choices:

  • "enable"

  • "disable"

call_capacity

integer

Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60).

channel

list / elements=dictionary

Selected list of wireless radio channels.

chan

string / required

Channel number.

channel_bonding

string

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

Choices:

  • "160MHz"

  • "80MHz"

  • "40MHz"

  • "20MHz"

channel_utilization

string

Enable/disable measuring channel utilization.

Choices:

  • "enable"

  • "disable"

coexistence

string

Enable/disable allowing both HT20 and HT40 on the same radio .

Choices:

  • "enable"

  • "disable"

darrp

string

Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel .

Choices:

  • "enable"

  • "disable"

drma

string

Enable/disable dynamic radio mode assignment (DRMA) .

Choices:

  • "disable"

  • "enable"

drma_sensitivity

string

Network Coverage Factor (NCF) percentage required to consider a radio as redundant .

Choices:

  • "low"

  • "medium"

  • "high"

dtim

integer

Delivery Traffic Indication Map (DTIM) period (1 - 255). Set higher to save battery life of WiFi client in power-save mode.

frag_threshold

integer

Maximum packet size that can be sent without fragmentation (800 - 2346 bytes).

frequency_handoff

string

Enable/disable frequency handoff of clients to other channels .

Choices:

  • "enable"

  • "disable"

iperf_protocol

string

Iperf test protocol .

Choices:

  • "udp"

  • "tcp"

iperf_server_port

integer

Iperf service port number.

max_clients

integer

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

max_distance

integer

Maximum expected distance between the AP and clients (0 - 54000 m).

mode

string

Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

Choices:

  • "disabled"

  • "ap"

  • "monitor"

  • "sniffer"

  • "sam"

optional_antenna

string

Optional antenna used on FAP .

Choices:

  • "none"

  • "FANT-04ABGN-0606-O-N"

  • "FANT-04ABGN-1414-P-N"

  • "FANT-04ABGN-8065-P-N"

  • "FANT-04ABGN-0606-O-R"

  • "FANT-04ABGN-0606-P-R"

  • "FANT-10ACAX-1213-D-N"

  • "FANT-08ABGN-1213-D-R"

power_level

integer

Radio EIRP power level as a percentage of the maximum EIRP power (0 - 100).

power_mode

string

Set radio effective isotropic radiated power (EIRP) in dBm or by a percentage of the maximum EIRP . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

Choices:

  • "dBm"

  • "percentage"

power_value

integer

Radio EIRP power in dBm (1 - 33).

powersave_optimize

list / elements=string

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

Choices:

  • "tim"

  • "ac-vo"

  • "no-obss-scan"

  • "no-11b-rate"

  • "client-rate-follow"

protection_mode

string

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

Choices:

  • "rtscts"

  • "ctsonly"

  • "disable"

radio_id

integer

radio-id

rts_threshold

integer

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes).

sam_bssid

string

BSSID for WiFi network.

sam_captive_portal

string

Enable/disable Captive Portal Authentication .

Choices:

  • "enable"

  • "disable"

sam_cwp_failure_string

string

Failure identification on the page after an incorrect login.

sam_cwp_match_string

string

Identification string from the captive portal login form.

sam_cwp_password

string

Password for captive portal authentication.

sam_cwp_success_string

string

Success identification on the page after a successful login.

sam_cwp_test_url

string

Website the client is trying to access.

sam_cwp_username

string

Username for captive portal authentication.

sam_password

string

Passphrase for WiFi network connection.

sam_report_intv

integer

SAM report interval (sec), 0 for a one-time report.

sam_security_type

string

Select WiFi network security type .

Choices:

  • "open"

  • "wpa-personal"

  • "wpa-enterprise"

sam_server

string

SAM test server IP address or domain name.

sam_server_fqdn

string

SAM test server domain name.

sam_server_ip

string

SAM test server IP address.

sam_server_type

string

Select SAM server type .

Choices:

  • "ip"

  • "fqdn"

sam_ssid

string

SSID for WiFi network.

sam_test

string

Select SAM test type .

Choices:

  • "ping"

  • "iperf"

sam_username

string

Username for WiFi network connection.

set_80211d

string

Enable/disable 802.11d countryie.

Choices:

  • "enable"

  • "disable"

short_guard_interval

string

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

Choices:

  • "enable"

  • "disable"

spectrum_analysis

string

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

Choices:

  • "enable"

  • "scan-only"

  • "disable"

transmit_optimize

list / elements=string

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

Choices:

  • "disable"

  • "power-save"

  • "aggr-limit"

  • "retry-limit"

  • "send-bar"

vap_all

string

Configure method for assigning SSIDs to this FortiAP .

Choices:

  • "tunnel"

  • "bridge"

  • "manual"

  • "enable"

  • "disable"

vaps

list / elements=dictionary

Manually selected list of Virtual Access Points (VAPs).

name

string / required

Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name system.interface.name.

wids_profile

string

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name.

zero_wait_dfs

string

Enable/disable zero wait DFS on radio .

Choices:

  • "enable"

  • "disable"

radio_3

dictionary

Configuration options for radio 3.

airtime_fairness

string

Enable/disable airtime fairness .

Choices:

  • "enable"

  • "disable"

amsdu

string

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

Choices:

  • "enable"

  • "disable"

ap_handoff

string

Enable/disable AP handoff of clients to other APs .

Choices:

  • "enable"

  • "disable"

ap_sniffer_addr

string

MAC address to monitor.

ap_sniffer_bufsize

integer

Sniffer buffer size (1 - 32 MB).

ap_sniffer_chan

integer

Channel on which to operate the sniffer .

ap_sniffer_ctl

string

Enable/disable sniffer on WiFi control frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_data

string

Enable/disable sniffer on WiFi data frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_beacon

string

Enable/disable sniffer on WiFi management Beacon frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_other

string

Enable/disable sniffer on WiFi management other frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_probe

string

Enable/disable sniffer on WiFi management probe frames .

Choices:

  • "enable"

  • "disable"

arrp_profile

string

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio. Source wireless-controller .arrp-profile.name.

auto_power_high

integer

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_level

string

Enable/disable automatic power-level adjustment to prevent co-channel interference .

Choices:

  • "enable"

  • "disable"

auto_power_low

integer

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_target

string

Target of automatic transmit power adjustment in dBm (-95 to -20).

band

string

WiFi band that Radio 3 operates on.

Choices:

  • "802.11a"

  • "802.11b"

  • "802.11g"

  • "802.11n"

  • "802.11n-5G"

  • "802.11ac"

  • "802.11ax-5G"

  • "802.11ax"

  • "802.11ac-2G"

  • "802.11ax-6G"

  • "802.11n,g-only"

  • "802.11g-only"

  • "802.11n-only"

  • "802.11n-5G-only"

  • "802.11ac,n-only"

  • "802.11ac-only"

  • "802.11ax,ac-only"

  • "802.11ax,ac,n-only"

  • "802.11ax-5G-only"

  • "802.11ax,n-only"

  • "802.11ax,n,g-only"

  • "802.11ax-only"

band_5g_type

string

WiFi 5G band type.

Choices:

  • "5g-full"

  • "5g-high"

  • "5g-low"

bandwidth_admission_control

string

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

Choices:

  • "enable"

  • "disable"

bandwidth_capacity

integer

Maximum bandwidth capacity allowed (1 - 600000 Kbps).

beacon_interval

integer

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

bss_color

integer

BSS color value for this 11ax radio (0 - 63, disable = 0).

bss_color_mode

string

BSS color mode for this 11ax radio .

Choices:

  • "auto"

  • "static"

call_admission_control

string

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

Choices:

  • "enable"

  • "disable"

call_capacity

integer

Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60).

channel

list / elements=dictionary

Selected list of wireless radio channels.

chan

string / required

Channel number.

channel_bonding

string

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

Choices:

  • "160MHz"

  • "80MHz"

  • "40MHz"

  • "20MHz"

channel_utilization

string

Enable/disable measuring channel utilization.

Choices:

  • "enable"

  • "disable"

coexistence

string

Enable/disable allowing both HT20 and HT40 on the same radio .

Choices:

  • "enable"

  • "disable"

darrp

string

Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel .

Choices:

  • "enable"

  • "disable"

drma

string

Enable/disable dynamic radio mode assignment (DRMA) .

Choices:

  • "disable"

  • "enable"

drma_sensitivity

string

Network Coverage Factor (NCF) percentage required to consider a radio as redundant .

Choices:

  • "low"

  • "medium"

  • "high"

dtim

integer

Delivery Traffic Indication Map (DTIM) period (1 - 255). Set higher to save battery life of WiFi client in power-save mode.

frag_threshold

integer

Maximum packet size that can be sent without fragmentation (800 - 2346 bytes).

frequency_handoff

string

Enable/disable frequency handoff of clients to other channels .

Choices:

  • "enable"

  • "disable"

iperf_protocol

string

Iperf test protocol .

Choices:

  • "udp"

  • "tcp"

iperf_server_port

integer

Iperf service port number.

max_clients

integer

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

max_distance

integer

Maximum expected distance between the AP and clients (0 - 54000 m).

mode

string

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

Choices:

  • "disabled"

  • "ap"

  • "monitor"

  • "sniffer"

  • "sam"

optional_antenna

string

Optional antenna used on FAP .

Choices:

  • "none"

  • "FANT-04ABGN-0606-O-N"

  • "FANT-04ABGN-1414-P-N"

  • "FANT-04ABGN-8065-P-N"

  • "FANT-04ABGN-0606-O-R"

  • "FANT-04ABGN-0606-P-R"

  • "FANT-10ACAX-1213-D-N"

  • "FANT-08ABGN-1213-D-R"

power_level

integer

Radio EIRP power level as a percentage of the maximum EIRP power (0 - 100).

power_mode

string

Set radio effective isotropic radiated power (EIRP) in dBm or by a percentage of the maximum EIRP . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

Choices:

  • "dBm"

  • "percentage"

power_value

integer

Radio EIRP power in dBm (1 - 33).

powersave_optimize

list / elements=string

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

Choices:

  • "tim"

  • "ac-vo"

  • "no-obss-scan"

  • "no-11b-rate"

  • "client-rate-follow"

protection_mode

string

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

Choices:

  • "rtscts"

  • "ctsonly"

  • "disable"

radio_id

integer

radio-id

rts_threshold

integer

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes).

sam_bssid

string

BSSID for WiFi network.

sam_captive_portal

string

Enable/disable Captive Portal Authentication .

Choices:

  • "enable"

  • "disable"

sam_cwp_failure_string

string

Failure identification on the page after an incorrect login.

sam_cwp_match_string

string

Identification string from the captive portal login form.

sam_cwp_password

string

Password for captive portal authentication.

sam_cwp_success_string

string

Success identification on the page after a successful login.

sam_cwp_test_url

string

Website the client is trying to access.

sam_cwp_username

string

Username for captive portal authentication.

sam_password

string

Passphrase for WiFi network connection.

sam_report_intv

integer

SAM report interval (sec), 0 for a one-time report.

sam_security_type

string

Select WiFi network security type .

Choices:

  • "open"

  • "wpa-personal"

  • "wpa-enterprise"

sam_server

string

SAM test server IP address or domain name.

sam_server_fqdn

string

SAM test server domain name.

sam_server_ip

string

SAM test server IP address.

sam_server_type

string

Select SAM server type .

Choices:

  • "ip"

  • "fqdn"

sam_ssid

string

SSID for WiFi network.

sam_test

string

Select SAM test type .

Choices:

  • "ping"

  • "iperf"

sam_username

string

Username for WiFi network connection.

set_80211d

string

Enable/disable 802.11d countryie.

Choices:

  • "enable"

  • "disable"

short_guard_interval

string

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

Choices:

  • "enable"

  • "disable"

spectrum_analysis

string

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

Choices:

  • "enable"

  • "scan-only"

  • "disable"

transmit_optimize

list / elements=string

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

Choices:

  • "disable"

  • "power-save"

  • "aggr-limit"

  • "retry-limit"

  • "send-bar"

vap_all

string

Configure method for assigning SSIDs to this FortiAP .

Choices:

  • "tunnel"

  • "bridge"

  • "manual"

  • "enable"

  • "disable"

vaps

list / elements=dictionary

Manually selected list of Virtual Access Points (VAPs).

name

string / required

Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name system.interface.name.

wids_profile

string

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name.

zero_wait_dfs

string

Enable/disable zero wait DFS on radio .

Choices:

  • "enable"

  • "disable"

radio_4

dictionary

Configuration options for radio 4.

airtime_fairness

string

Enable/disable airtime fairness .

Choices:

  • "enable"

  • "disable"

amsdu

string

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

Choices:

  • "enable"

  • "disable"

ap_handoff

string

Enable/disable AP handoff of clients to other APs .

Choices:

  • "enable"

  • "disable"

ap_sniffer_addr

string

MAC address to monitor.

ap_sniffer_bufsize

integer

Sniffer buffer size (1 - 32 MB).

ap_sniffer_chan

integer

Channel on which to operate the sniffer .

ap_sniffer_ctl

string

Enable/disable sniffer on WiFi control frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_data

string

Enable/disable sniffer on WiFi data frame .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_beacon

string

Enable/disable sniffer on WiFi management Beacon frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_other

string

Enable/disable sniffer on WiFi management other frames .

Choices:

  • "enable"

  • "disable"

ap_sniffer_mgmt_probe

string

Enable/disable sniffer on WiFi management probe frames .

Choices:

  • "enable"

  • "disable"

arrp_profile

string

Distributed Automatic Radio Resource Provisioning (DARRP) profile name to assign to the radio. Source wireless-controller .arrp-profile.name.

auto_power_high

integer

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_level

string

Enable/disable automatic power-level adjustment to prevent co-channel interference .

Choices:

  • "enable"

  • "disable"

auto_power_low

integer

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

auto_power_target

string

Target of automatic transmit power adjustment in dBm (-95 to -20).

band

string

WiFi band that Radio 3 operates on.

Choices:

  • "802.11a"

  • "802.11b"

  • "802.11g"

  • "802.11n"

  • "802.11n-5G"

  • "802.11ac"

  • "802.11ax-5G"

  • "802.11ax"

  • "802.11ac-2G"

  • "802.11ax-6G"

  • "802.11n,g-only"

  • "802.11g-only"

  • "802.11n-only"

  • "802.11n-5G-only"

  • "802.11ac,n-only"

  • "802.11ac-only"

  • "802.11ax,ac-only"

  • "802.11ax,ac,n-only"

  • "802.11ax-5G-only"

  • "802.11ax,n-only"

  • "802.11ax,n,g-only"

  • "802.11ax-only"

band_5g_type

string

WiFi 5G band type.

Choices:

  • "5g-full"

  • "5g-high"

  • "5g-low"

bandwidth_admission_control

string

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

Choices:

  • "enable"

  • "disable"

bandwidth_capacity

integer

Maximum bandwidth capacity allowed (1 - 600000 Kbps).

beacon_interval

integer

Beacon interval. The time between beacon frames in milliseconds. Actual range of beacon interval depends on the AP platform type .

bss_color

integer

BSS color value for this 11ax radio (0 - 63, disable = 0).

bss_color_mode

string

BSS color mode for this 11ax radio .

Choices:

  • "auto"

  • "static"

call_admission_control

string

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

Choices:

  • "enable"

  • "disable"

call_capacity

integer

Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60).

channel

list / elements=dictionary

Selected list of wireless radio channels.

chan

string / required

Channel number.

channel_bonding

string

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

Choices:

  • "160MHz"

  • "80MHz"

  • "40MHz"

  • "20MHz"

channel_utilization

string

Enable/disable measuring channel utilization.

Choices:

  • "enable"

  • "disable"

coexistence

string

Enable/disable allowing both HT20 and HT40 on the same radio .

Choices:

  • "enable"

  • "disable"

darrp

string

Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel .

Choices:

  • "enable"

  • "disable"

drma

string

Enable/disable dynamic radio mode assignment (DRMA) .

Choices:

  • "disable"

  • "enable"

drma_sensitivity

string

Network Coverage Factor (NCF) percentage required to consider a radio as redundant .

Choices:

  • "low"

  • "medium"

  • "high"

dtim

integer

Delivery Traffic Indication Map (DTIM) period (1 - 255). Set higher to save battery life of WiFi client in power-save mode.

frag_threshold

integer

Maximum packet size that can be sent without fragmentation (800 - 2346 bytes).

frequency_handoff

string

Enable/disable frequency handoff of clients to other channels .

Choices:

  • "enable"

  • "disable"

iperf_protocol

string

Iperf test protocol .

Choices:

  • "udp"

  • "tcp"

iperf_server_port

integer

Iperf service port number.

max_clients

integer

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

max_distance

integer

Maximum expected distance between the AP and clients (0 - 54000 m).

mode

string

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, a sniffer, or a station.

Choices:

  • "disabled"

  • "ap"

  • "monitor"

  • "sniffer"

  • "sam"

optional_antenna

string

Optional antenna used on FAP .

Choices:

  • "none"

  • "FANT-04ABGN-0606-O-N"

  • "FANT-04ABGN-1414-P-N"

  • "FANT-04ABGN-8065-P-N"

  • "FANT-04ABGN-0606-O-R"

  • "FANT-04ABGN-0606-P-R"

  • "FANT-10ACAX-1213-D-N"

  • "FANT-08ABGN-1213-D-R"

power_level

integer

Radio EIRP power level as a percentage of the maximum EIRP power (0 - 100).

power_mode

string

Set radio effective isotropic radiated power (EIRP) in dBm or by a percentage of the maximum EIRP . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

Choices:

  • "dBm"

  • "percentage"

power_value

integer

Radio EIRP power in dBm (1 - 33).

powersave_optimize

list / elements=string

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

Choices:

  • "tim"

  • "ac-vo"

  • "no-obss-scan"

  • "no-11b-rate"

  • "client-rate-follow"

protection_mode

string

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

Choices:

  • "rtscts"

  • "ctsonly"

  • "disable"

rts_threshold

integer

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes).

sam_bssid

string

BSSID for WiFi network.

sam_captive_portal

string

Enable/disable Captive Portal Authentication .

Choices:

  • "enable"

  • "disable"

sam_cwp_failure_string

string

Failure identification on the page after an incorrect login.

sam_cwp_match_string

string

Identification string from the captive portal login form.

sam_cwp_password

string

Password for captive portal authentication.

sam_cwp_success_string

string

Success identification on the page after a successful login.

sam_cwp_test_url

string

Website the client is trying to access.

sam_cwp_username

string

Username for captive portal authentication.

sam_password

string

Passphrase for WiFi network connection.

sam_report_intv

integer

SAM report interval (sec), 0 for a one-time report.

sam_security_type

string

Select WiFi network security type .

Choices:

  • "open"

  • "wpa-personal"

  • "wpa-enterprise"

sam_server

string

SAM test server IP address or domain name.

sam_server_fqdn

string

SAM test server domain name.

sam_server_ip

string

SAM test server IP address.

sam_server_type

string

Select SAM server type .

Choices:

  • "ip"

  • "fqdn"

sam_ssid

string

SSID for WiFi network.

sam_test

string

Select SAM test type .

Choices:

  • "ping"

  • "iperf"

sam_username

string

Username for WiFi network connection.

set_80211d

string

Enable/disable 802.11d countryie.

Choices:

  • "enable"

  • "disable"

short_guard_interval

string

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

Choices:

  • "enable"

  • "disable"

spectrum_analysis

string

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

Choices:

  • "enable"

  • "scan-only"

  • "disable"

transmit_optimize

list / elements=string

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

Choices:

  • "disable"

  • "power-save"

  • "aggr-limit"

  • "retry-limit"

  • "send-bar"

vap_all

string

Configure method for assigning SSIDs to this FortiAP .

Choices:

  • "tunnel"

  • "bridge"

  • "manual"

  • "enable"

  • "disable"

vaps

list / elements=dictionary

Manually selected list of Virtual Access Points (VAPs).

name

string / required

Virtual Access Point (VAP) name. Source wireless-controller.vap-group.name system.interface.name.

wids_profile

string

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. Source wireless-controller.wids-profile.name.

zero_wait_dfs

string

Enable/disable zero wait DFS on radio .

Choices:

  • "enable"

  • "disable"

split_tunneling_acl

list / elements=dictionary

Split tunneling ACL filter list.

dest_ip

string

Destination IP and mask for the split-tunneling subnet.

id

integer / required

ID.

split_tunneling_acl_local_ap_subnet

string

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

Choices:

  • "enable"

  • "disable"

split_tunneling_acl_path

string

Split tunneling ACL path is local/tunnel.

Choices:

  • "tunnel"

  • "local"

syslog_profile

string

System log server configuration profile name. Source wireless-controller.syslog-profile.name.

integer

The MTU of downlink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; ).

integer

The maximum transmission unit (MTU) of uplink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; ).

unii_4_5ghz_band

string

Enable/disable UNII-4 5Ghz band channels .

Choices:

  • "enable"

  • "disable"

wan_port_auth

string

Set WAN port authentication mode .

Choices:

  • "none"

  • "802.1x"

wan_port_auth_methods

string

WAN port 802.1x supplicant EAP methods .

Choices:

  • "all"

  • "EAP-FAST"

  • "EAP-TLS"

  • "EAP-PEAP"

wan_port_auth_password

string

Set WAN port 802.1x supplicant password.

wan_port_auth_usrname

string

Set WAN port 802.1x supplicant user name.

wan_port_mode

string

Enable/disable using a WAN port as a LAN port.

Choices:

  • "wan-lan"

  • "wan-only"

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.
    fortios_wireless_controller_wtp_profile:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      wireless_controller_wtp_profile:
        allowaccess: "https"
        ap_country: "--"
        ap_handoff: "enable"
        apcfg_profile: "<your_own_value> (source wireless-controller.apcfg-profile.name)"
        ble_profile: "<your_own_value> (source wireless-controller.ble-profile.name)"
        comment: "Comment."
        console_login: "enable"
        control_message_offload: "ebp-frame"
        deny_mac_list:
         -
            id:  "12"
            mac: "<your_own_value>"
        dtls_in_kernel: "enable"
        dtls_policy: "clear-text"
        energy_efficient_ethernet: "enable"
        esl_ses_dongle:
            apc_addr_type: "fqdn"
            apc_fqdn: "<your_own_value>"
            apc_ip: "<your_own_value>"
            apc_port: "0"
            coex_level: "none"
            compliance_level: "compliance-level-2"
            esl_channel: "-1"
            output_power: "a"
            scd_enable: "enable"
            tls_cert_verification: "enable"
            tls_fqdn_verification: "enable"
        ext_info_enable: "enable"
        frequency_handoff: "enable"
        handoff_roaming: "enable"
        handoff_rssi: "25"
        handoff_sta_thresh: "0"
        indoor_outdoor_deployment: "platform-determined"
        ip_fragment_preventing: "tcp-mss-adjust"
        lan:
            port_esl_mode: "offline"
            port_esl_ssid: "<your_own_value> (source system.interface.name)"
            port_mode: "offline"
            port_ssid: "<your_own_value> (source system.interface.name)"
            port1_mode: "offline"
            port1_ssid: "<your_own_value> (source system.interface.name)"
            port2_mode: "offline"
            port2_ssid: "<your_own_value> (source system.interface.name)"
            port3_mode: "offline"
            port3_ssid: "<your_own_value> (source system.interface.name)"
            port4_mode: "offline"
            port4_ssid: "<your_own_value> (source system.interface.name)"
            port5_mode: "offline"
            port5_ssid: "<your_own_value> (source system.interface.name)"
            port6_mode: "offline"
            port6_ssid: "<your_own_value> (source system.interface.name)"
            port7_mode: "offline"
            port7_ssid: "<your_own_value> (source system.interface.name)"
            port8_mode: "offline"
            port8_ssid: "<your_own_value> (source system.interface.name)"
        lbs:
            aeroscout: "enable"
            aeroscout_ap_mac: "bssid"
            aeroscout_mmu_report: "enable"
            aeroscout_mu: "enable"
            aeroscout_mu_factor: "20"
            aeroscout_mu_timeout: "5"
            aeroscout_server_ip: "<your_own_value>"
            aeroscout_server_port: "0"
            ekahau_blink_mode: "enable"
            ekahau_tag: "<your_own_value>"
            erc_server_ip: "<your_own_value>"
            erc_server_port: "8569"
            fortipresence: "foreign"
            fortipresence_ble: "enable"
            fortipresence_frequency: "30"
            fortipresence_port: "3000"
            fortipresence_project: "<your_own_value>"
            fortipresence_rogue: "enable"
            fortipresence_secret: "<your_own_value>"
            fortipresence_server: "<your_own_value>"
            fortipresence_server_addr_type: "ipv4"
            fortipresence_server_fqdn: "<your_own_value>"
            fortipresence_unassoc: "enable"
            station_locate: "enable"
        led_schedules:
         -
            name: "default_name_83 (source firewall.schedule.group.name firewall.schedule.recurring.name firewall.schedule.onetime.name)"
        led_state: "enable"
        lldp: "enable"
        login_passwd: "<your_own_value>"
        login_passwd_change: "yes"
        max_clients: "0"
        name: "default_name_89"
        platform:
            ddscan: "enable"
            mode: "single-5G"
            type: "AP-11N"
        poe_mode: "auto"
        radio_1:
            airtime_fairness: "enable"
            amsdu: "enable"
            ap_handoff: "enable"
            ap_sniffer_addr: "<your_own_value>"
            ap_sniffer_bufsize: "16"
            ap_sniffer_chan: "36"
            ap_sniffer_ctl: "enable"
            ap_sniffer_data: "enable"
            ap_sniffer_mgmt_beacon: "enable"
            ap_sniffer_mgmt_other: "enable"
            ap_sniffer_mgmt_probe: "enable"
            arrp_profile: "<your_own_value> (source wireless-controller.arrp-profile.name)"
            auto_power_high: "17"
            auto_power_level: "enable"
            auto_power_low: "10"
            auto_power_target: "<your_own_value>"
            band: "802.11a"
            band_5g_type: "5g-full"
            bandwidth_admission_control: "enable"
            bandwidth_capacity: "2000"
            beacon_interval: "100"
            bss_color: "0"
            bss_color_mode: "auto"
            call_admission_control: "enable"
            call_capacity: "10"
            channel:
             -
                chan: "<your_own_value>"
            channel_bonding: "160MHz"
            channel_utilization: "enable"
            coexistence: "enable"
            darrp: "enable"
            drma: "disable"
            drma_sensitivity: "low"
            dtim: "1"
            frag_threshold: "2346"
            frequency_handoff: "enable"
            iperf_protocol: "udp"
            iperf_server_port: "5001"
            max_clients: "0"
            max_distance: "0"
            mode: "disabled"
            optional_antenna: "none"
            power_level: "100"
            power_mode: "dBm"
            power_value: "27"
            powersave_optimize: "tim"
            protection_mode: "rtscts"
            radio_id: "2"
            rts_threshold: "2346"
            sam_bssid: "<your_own_value>"
            sam_captive_portal: "enable"
            sam_cwp_failure_string: "<your_own_value>"
            sam_cwp_match_string: "<your_own_value>"
            sam_cwp_password: "<your_own_value>"
            sam_cwp_success_string: "<your_own_value>"
            sam_cwp_test_url: "<your_own_value>"
            sam_cwp_username: "<your_own_value>"
            sam_password: "<your_own_value>"
            sam_report_intv: "0"
            sam_security_type: "open"
            sam_server: "<your_own_value>"
            sam_server_fqdn: "<your_own_value>"
            sam_server_ip: "<your_own_value>"
            sam_server_type: "ip"
            sam_ssid: "<your_own_value>"
            sam_test: "ping"
            sam_username: "<your_own_value>"
            set_80211d: "enable"
            short_guard_interval: "enable"
            spectrum_analysis: "enable"
            transmit_optimize: "disable"
            vap_all: "tunnel"
            vaps:
             -
                name: "default_name_169 (source wireless-controller.vap-group.name system.interface.name)"
            wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
            zero_wait_dfs: "enable"
        radio_2:
            airtime_fairness: "enable"
            amsdu: "enable"
            ap_handoff: "enable"
            ap_sniffer_addr: "<your_own_value>"
            ap_sniffer_bufsize: "16"
            ap_sniffer_chan: "6"
            ap_sniffer_ctl: "enable"
            ap_sniffer_data: "enable"
            ap_sniffer_mgmt_beacon: "enable"
            ap_sniffer_mgmt_other: "enable"
            ap_sniffer_mgmt_probe: "enable"
            arrp_profile: "<your_own_value> (source wireless-controller.arrp-profile.name)"
            auto_power_high: "17"
            auto_power_level: "enable"
            auto_power_low: "10"
            auto_power_target: "<your_own_value>"
            band: "802.11a"
            band_5g_type: "5g-full"
            bandwidth_admission_control: "enable"
            bandwidth_capacity: "2000"
            beacon_interval: "100"
            bss_color: "0"
            bss_color_mode: "auto"
            call_admission_control: "enable"
            call_capacity: "10"
            channel:
             -
                chan: "<your_own_value>"
            channel_bonding: "160MHz"
            channel_utilization: "enable"
            coexistence: "enable"
            darrp: "enable"
            drma: "disable"
            drma_sensitivity: "low"
            dtim: "1"
            frag_threshold: "2346"
            frequency_handoff: "enable"
            iperf_protocol: "udp"
            iperf_server_port: "5001"
            max_clients: "0"
            max_distance: "0"
            mode: "disabled"
            optional_antenna: "none"
            power_level: "100"
            power_mode: "dBm"
            power_value: "27"
            powersave_optimize: "tim"
            protection_mode: "rtscts"
            radio_id: "2"
            rts_threshold: "2346"
            sam_bssid: "<your_own_value>"
            sam_captive_portal: "enable"
            sam_cwp_failure_string: "<your_own_value>"
            sam_cwp_match_string: "<your_own_value>"
            sam_cwp_password: "<your_own_value>"
            sam_cwp_success_string: "<your_own_value>"
            sam_cwp_test_url: "<your_own_value>"
            sam_cwp_username: "<your_own_value>"
            sam_password: "<your_own_value>"
            sam_report_intv: "0"
            sam_security_type: "open"
            sam_server: "<your_own_value>"
            sam_server_fqdn: "<your_own_value>"
            sam_server_ip: "<your_own_value>"
            sam_server_type: "ip"
            sam_ssid: "<your_own_value>"
            sam_test: "ping"
            sam_username: "<your_own_value>"
            set_80211d: "enable"
            short_guard_interval: "enable"
            spectrum_analysis: "enable"
            transmit_optimize: "disable"
            vap_all: "tunnel"
            vaps:
             -
                name: "default_name_246 (source wireless-controller.vap-group.name system.interface.name)"
            wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
            zero_wait_dfs: "enable"
        radio_3:
            airtime_fairness: "enable"
            amsdu: "enable"
            ap_handoff: "enable"
            ap_sniffer_addr: "<your_own_value>"
            ap_sniffer_bufsize: "16"
            ap_sniffer_chan: "6"
            ap_sniffer_ctl: "enable"
            ap_sniffer_data: "enable"
            ap_sniffer_mgmt_beacon: "enable"
            ap_sniffer_mgmt_other: "enable"
            ap_sniffer_mgmt_probe: "enable"
            arrp_profile: "<your_own_value> (source wireless-controller.arrp-profile.name)"
            auto_power_high: "17"
            auto_power_level: "enable"
            auto_power_low: "10"
            auto_power_target: "<your_own_value>"
            band: "802.11a"
            band_5g_type: "5g-full"
            bandwidth_admission_control: "enable"
            bandwidth_capacity: "2000"
            beacon_interval: "100"
            bss_color: "0"
            bss_color_mode: "auto"
            call_admission_control: "enable"
            call_capacity: "10"
            channel:
             -
                chan: "<your_own_value>"
            channel_bonding: "160MHz"
            channel_utilization: "enable"
            coexistence: "enable"
            darrp: "enable"
            drma: "disable"
            drma_sensitivity: "low"
            dtim: "1"
            frag_threshold: "2346"
            frequency_handoff: "enable"
            iperf_protocol: "udp"
            iperf_server_port: "5001"
            max_clients: "0"
            max_distance: "0"
            mode: "disabled"
            optional_antenna: "none"
            power_level: "100"
            power_mode: "dBm"
            power_value: "27"
            powersave_optimize: "tim"
            protection_mode: "rtscts"
            radio_id: "2"
            rts_threshold: "2346"
            sam_bssid: "<your_own_value>"
            sam_captive_portal: "enable"
            sam_cwp_failure_string: "<your_own_value>"
            sam_cwp_match_string: "<your_own_value>"
            sam_cwp_password: "<your_own_value>"
            sam_cwp_success_string: "<your_own_value>"
            sam_cwp_test_url: "<your_own_value>"
            sam_cwp_username: "<your_own_value>"
            sam_password: "<your_own_value>"
            sam_report_intv: "0"
            sam_security_type: "open"
            sam_server: "<your_own_value>"
            sam_server_fqdn: "<your_own_value>"
            sam_server_ip: "<your_own_value>"
            sam_server_type: "ip"
            sam_ssid: "<your_own_value>"
            sam_test: "ping"
            sam_username: "<your_own_value>"
            set_80211d: "enable"
            short_guard_interval: "enable"
            spectrum_analysis: "enable"
            transmit_optimize: "disable"
            vap_all: "tunnel"
            vaps:
             -
                name: "default_name_323 (source wireless-controller.vap-group.name system.interface.name)"
            wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
            zero_wait_dfs: "enable"
        radio_4:
            airtime_fairness: "enable"
            amsdu: "enable"
            ap_handoff: "enable"
            ap_sniffer_addr: "<your_own_value>"
            ap_sniffer_bufsize: "16"
            ap_sniffer_chan: "6"
            ap_sniffer_ctl: "enable"
            ap_sniffer_data: "enable"
            ap_sniffer_mgmt_beacon: "enable"
            ap_sniffer_mgmt_other: "enable"
            ap_sniffer_mgmt_probe: "enable"
            arrp_profile: "<your_own_value> (source wireless-controller.arrp-profile.name)"
            auto_power_high: "17"
            auto_power_level: "enable"
            auto_power_low: "10"
            auto_power_target: "<your_own_value>"
            band: "802.11a"
            band_5g_type: "5g-full"
            bandwidth_admission_control: "enable"
            bandwidth_capacity: "2000"
            beacon_interval: "100"
            bss_color: "0"
            bss_color_mode: "auto"
            call_admission_control: "enable"
            call_capacity: "10"
            channel:
             -
                chan: "<your_own_value>"
            channel_bonding: "160MHz"
            channel_utilization: "enable"
            coexistence: "enable"
            darrp: "enable"
            drma: "disable"
            drma_sensitivity: "low"
            dtim: "1"
            frag_threshold: "2346"
            frequency_handoff: "enable"
            iperf_protocol: "udp"
            iperf_server_port: "5001"
            max_clients: "0"
            max_distance: "0"
            mode: "disabled"
            optional_antenna: "none"
            power_level: "100"
            power_mode: "dBm"
            power_value: "27"
            powersave_optimize: "tim"
            protection_mode: "rtscts"
            rts_threshold: "2346"
            sam_bssid: "<your_own_value>"
            sam_captive_portal: "enable"
            sam_cwp_failure_string: "<your_own_value>"
            sam_cwp_match_string: "<your_own_value>"
            sam_cwp_password: "<your_own_value>"
            sam_cwp_success_string: "<your_own_value>"
            sam_cwp_test_url: "<your_own_value>"
            sam_cwp_username: "<your_own_value>"
            sam_password: "<your_own_value>"
            sam_report_intv: "0"
            sam_security_type: "open"
            sam_server: "<your_own_value>"
            sam_server_fqdn: "<your_own_value>"
            sam_server_ip: "<your_own_value>"
            sam_server_type: "ip"
            sam_ssid: "<your_own_value>"
            sam_test: "ping"
            sam_username: "<your_own_value>"
            set_80211d: "enable"
            short_guard_interval: "enable"
            spectrum_analysis: "enable"
            transmit_optimize: "disable"
            vap_all: "tunnel"
            vaps:
             -
                name: "default_name_399 (source wireless-controller.vap-group.name system.interface.name)"
            wids_profile: "<your_own_value> (source wireless-controller.wids-profile.name)"
            zero_wait_dfs: "enable"
        split_tunneling_acl:
         -
            dest_ip: "<your_own_value>"
            id:  "404"
        split_tunneling_acl_local_ap_subnet: "enable"
        split_tunneling_acl_path: "tunnel"
        syslog_profile: "<your_own_value> (source wireless-controller.syslog-profile.name)"
        tun_mtu_downlink: "0"
        tun_mtu_uplink: "0"
        unii_4_5ghz_band: "enable"
        wan_port_auth: "none"
        wan_port_auth_methods: "all"
        wan_port_auth_password: "<your_own_value>"
        wan_port_auth_usrname: "<your_own_value>"
        wan_port_mode: "wan-lan"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: "1547"

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: "PUT"

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: "200"

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: "id"

name

string

Name of the table used to fulfill the request

Returned: always

Sample: "urlfilter"

path

string

Path of the table used to fulfill the request

Returned: always

Sample: "webfilter"

revision

string

Internal revision number

Returned: always

Sample: "17.0.2.10658"

serial

string

Serial number of the unit

Returned: always

Sample: "FGVMEVYYQT3AB5352"

status

string

Indication of the operation’s result

Returned: always

Sample: "success"

vdom

string

Virtual domain used

Returned: always

Sample: "root"

version

string

Version of the FortiGate

Returned: always

Sample: "v5.6.3"

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)