junipernetworks.junos.junos_interfaces module – Junos Interfaces resource module

Note

This module is part of the junipernetworks.junos collection (version 4.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install junipernetworks.junos. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: junipernetworks.junos.junos_interfaces.

New in junipernetworks.junos 1.0.0

Synopsis

  • This module manages the interfaces on Juniper Junos OS network devices.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

  • ncclient (>=v0.6.4)

Parameters

Parameter

Comments

config

list / elements=dictionary

The provided configuration

description

string

Interface description.

duplex

string

Interface link status. Applicable for Ethernet interfaces only, either in half duplex, full duplex or in automatic state which negotiates the duplex automatically.

Choices:

  • "automatic"

  • "full-duplex"

  • "half-duplex"

enabled

boolean

Administrative state of the interface.

Set the value to true to administratively enabled the interface or false to disable it.

Choices:

  • false

  • true ← (default)

hold_time

dictionary

The hold time for given interface name.

down

integer

The link down hold time in milliseconds.

up

integer

The link up hold time in milliseconds.

mtu

integer

MTU for a specific interface.

Applicable for Ethernet interfaces only.

name

string / required

Full name of interface, e.g. ge-0/0/0.

speed

string

Interface link speed. Applicable for Ethernet interfaces only.

units

list / elements=dictionary

Specify Logical interfaces units.

description

string

Specify logical interface description.

name

integer

Specify interface unit number.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the Junos device by executing the command show interfaces.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Tested against vSRX JUNOS version 18.4R1.

  • This module works with connection netconf.

  • See the Junos OS Platform Options.

Examples

# Using deleted

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
#    unit 0 {
#     description "This is logical intf unit0";
# }
# ge-0/0/2 {
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }

- name: "Delete given options for the interface (Note: This won't delete the interface itself if any other values are configured for interface)"
  junipernetworks.junos.junos_interfaces:
    config:
    - name: ge-0/0/1
      description: Configured by Ansible-1
      speed: 1g
      mtu: 1800
    - name: ge-0/0/2
      description: Configured by Ansible -2
    state: deleted

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
#    ether-options {
#        auto-negotiation;
#    }
# }


# Using merged

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "test interface";
#    speed 1g;
# }
# fe-0/0/2 {
#     vlan-tagging;
#     unit 10 {
#         vlan-id 10;
#     }
#     unit 11 {
#         vlan-id 11;
#     }
# }

- name: Merge provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_interfaces:
    config:
    - name: ge-0/0/1
      description: Configured by Ansible-1
      enabled: true
      units:
        - name: 0
          description: "This is logical intf unit0"
      mtu: 1800
    - name: ge-0/0/2
      description: Configured by Ansible-2
      enabled: false
    state: merged

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
#    unit 0 {
#     description "This is logical intf unit0";
#   }
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
# }


# Using overridden

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }

- name: Override device configuration of all interfaces with provided configuration
  junipernetworks.junos.junos_interfaces:
    config:
    - name: ge-0/0/2
      description: Configured by Ansible-2
      enabled: false
      mtu: 2800
    - name: ge-0/0/3
      description: Configured by Ansible-3
    state: overridden

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    mtu 2800
# }
# ge-0/0/3 {
#    description "Configured by Ansible-3";
# }


# Using replaced

# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    mtu 1800;
#    speed 1g;
#    description "Configured by Ansible-2";
#    ether-options {
#        auto-negotiation;
#    }
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }

- name: Replaces device configuration of listed interfaces with provided configuration
  junipernetworks.junos.junos_interfaces:
    config:
    - name: ge-0/0/2
      description: Configured by Ansible-2
      enabled: false
      mtu: 2800
    - name: ge-0/0/3
      description: Configured by Ansible-3
    state: replaced

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/1 {
#    description "Configured by Ansible-1";
#    speed 1g;
#    mtu 1800
# }
# ge-0/0/2 {
#    disable;
#    description "Configured by Ansible-2";
#    mtu 2800
# }
# ge-0/0/3 {
#    description "Configured by Ansible-3";
# }
# ge-0/0/11 {
#    description "Configured by Ansible-11";
# }
# Using gathered
# Before state:
# ------------
#
# vagrant@vsrx# show interfaces
# fe-0/0/2 {
#     description "This is interface DESCRIPTION";
#     vlan-tagging;
#     unit 10 {
#         description "UNIT 10 DESCRIPTION";
#         vlan-id 10;
#     }
#     unit 11 {
#         description "UNIT 11 DESCRIPTION";
#         vlan-id 11;
#     }
# }
# fxp0 {
#     description OUTER;
#     unit 0 {
#         description "Sample config";
#         family inet {
#             dhcp;
#         }
#     }
# }
#
- name: Gather junos interfaces as in given arguments
  junipernetworks.junos.junos_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "description": "This is interface DESCRIPTION",
#             "enabled": true,
#             "name": "fe-0/0/2",
#             "units": [
#                 {
#                     "description": "UNIT 10 DESCRIPTION",
#                     "name": 10
#                 },
#                 {
#                     "description": "UNIT 11 DESCRIPTION",
#                     "name": 11
#                 }
#             ]
#         },
#         {
#             "description": "OUTER",
#             "enabled": true,
#             "name": "fxp0",
#             "units": [
#                 {
#                     "description": "Sample config",
#                     "name": 0
#                 }
#             ]
#         }
#     ]
# After state:
# ------------
#
# vagrant@vsrx# show interfaces
# fe-0/0/2 {
#     description "This is interface DESCRIPTION";
#     vlan-tagging;
#     unit 10 {
#         description "UNIT 10 DESCRIPTION";
#         vlan-id 10;
#     }
#     unit 11 {
#         description "UNIT 11 DESCRIPTION";
#         vlan-id 11;
#     }
# }
# fxp0 {
#     description OUTER;
#     unit 0 {
#         description "Sample config";
#         family inet {
#             dhcp;
#         }
#     }
# }
#
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <interfaces>
#             <interface>
#                 <name>ge-0/0/1</name>
#                 <description>Configured by Ansible</description>
#                 <disable/>
#                 <speed>100m</speed>
#                 <mtu>1024</mtu>
#                 <hold-time>
#                     <up>2000</up>
#                     <down>2200</down>
#                 </hold-time>
#                 <link-mode>full-duplex</link-mode>
#                 <unit>
#                     <name>0</name>
#                     <family>
#                         <ethernet-switching>
#                             <interface-mode>access</interface-mode>
#                             <vlan>
#                                 <members>vlan100</members>
#                             </vlan>
#                         </ethernet-switching>
#                     </family>
#                 </unit>
#             </interface>
#         </interfaces>
#     </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "description": "Configured by Ansible",
#             "duplex": "full-duplex",
#             "enabled": false,
#             "hold_time": {
#                 "down": 2200,
#                 "up": 2000
#             },
#             "mtu": 1024,
#             "name": "ge-0/0/1",
#             "speed": "100m"
#         }
#     ]
#
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_interfaces:
    config:
    - name: ge-0/0/2
      description: Configured by Ansibull
      mtu: 2048
      speed: 20m
      hold_time:
        up: 3200
        down: 3200
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": <nc:interfaces
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:interface>
#         <nc:name>ge-0/0/2</nc:name>
#         <nc:description>Configured by Ansibull</nc:description>
#         <nc:speed>20m</nc:speed>
#         <nc:mtu>2048</nc:mtu>
#         <nc:hold-time>
#             <nc:up>3200</nc:up>
#             <nc:down>3200</nc:down>
#         </nc:hold-time>
#     </nc:interface>
# </nc:interfaces>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

xml

list / elements=string

The set of xml rpc payload pushed to the remote device.

Returned: always

Sample: ["<?xml version=\"1.0\" encoding=\"UTF-8\"?> <rpc-reply message-id=\"urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f\"> <configuration changed-seconds=\"1590139550\" changed-localtime=\"2020-05-22 09:25:50 UTC\"> <interfaces> <interface> <name>ge-0/0/1</name> <description>Configured by Ansible</description> <disable/> <speed>100m</speed> <mtu>1024</mtu> <hold-time> <up>2000</up> <down>2200</down> </hold-time> <link-mode>full-duplex</link-mode> <unit> <name>0</name> <family> <ethernet-switching> <interface-mode>access</interface-mode> <vlan> <members>vlan100</members> </vlan> </ethernet-switching> </family> </unit> </interface> </interfaces> </configuration> </rpc-reply>", "xml 2", "xml 3"]

Authors

  • Ganesh Nalawade (@ganeshrn)