mellanox.onyx.onyx_qos module – Configures QoS

Note

This module is part of the mellanox.onyx collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install mellanox.onyx.

To use it in a playbook, specify: mellanox.onyx.onyx_qos.

Synopsis

  • This module provides declarative management of Onyx QoS configuration on Mellanox ONYX network devices.

Parameters

Parameter

Comments

interfaces

string / required

list of interfaces name.

rewrite_dscp

string

rewrite with type dscp.

Choices:

  • "enabled"

  • "disabled" ← (default)

rewrite_pcp

string

rewrite with type pcp.

Choices:

  • "enabled"

  • "disabled" ← (default)

trust

string

trust type.

Choices:

  • "L2" ← (default)

  • "L3"

  • "both"

Notes

Note

  • Tested on ONYX 3.6.8130

Examples

- name: Configure QoS
  onyx_QoS:
    interfaces:
      - Mpo7
      - Mpo7
    trust: L3
    rewrite_pcp: disabled
    rewrite_dscp: enabled

- name: Configure QoS
  onyx_QoS:
    interfaces:
      - Eth1/1
      - Eth1/2
    trust: both
    rewrite_pcp: disabled
    rewrite_dscp: enabled

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

The list of configuration mode commands to send to the device.

Returned: always

Sample: ["interface ethernet 1/16 qos trust L3", "interface mlag-port-channel 7 qos trust L3", "interface port-channel 1 qos trust L3", "interface mlag-port-channel 7 qos trust L2", "interface mlag-port-channel 7 qos rewrite dscp", "interface ethernet 1/16 qos rewrite pcp", "interface ethernet 1/1 no qos rewrite pcp"]

Authors

  • Anas Badaha (@anasb)