You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

microsoft.ad.group module – Manage Active Directory group objects

Note

This module is part of the microsoft.ad collection (version 1.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install microsoft.ad. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: microsoft.ad.group.

Synopsis

• Manages Active Directory group objects and their attributes.

Requirements

The below requirements are needed on the host that executes this module.

• ActiveDirectory PowerShell module

Parameters

Parameter	Comments
attributes dictionary	The attributes to either add, remove, or set on the AD object. The value of each attribute option should be a dictionary where the key is the LDAP attribute, e.g. firstName, comment and the value is the value, or list of values, to set for that attribute. The attribute value(s) can either be the raw string, integer, or bool value to add, remove, or set on the attribute in question. The value can also be a dictionary with the type key set to bytes, date_time, security_descriptor, or raw and the value for this entry under the value key. The bytes type has a value that is a base64 encoded string of the raw bytes to set. The date_time type has a value that is the ISO 8601 DateTime string of the DateTime to set. The DateTime will be set as the Microsoft FILETIME integer value which is the number of 100 nanoseconds since 1601-01-01 in UTC. The security_descriptor type has a value that is the Security Descriptor SDDL string used for the nTSecurityDescriptor attribute. The raw type is the int, string, or boolean value to set. String attribute values are compared using a case sensitive match on the AD object being managed. See LDAP attributes help for more information. Default: {}
add dictionary	A dictionary of all the attributes and their value(s) to add to the AD object being managed if they are not already present. This is used for attributes that can contain multiple values, if the attribute only allows a single value, use set instead. Default: {}
remove dictionary	A dictionary of all the attributes and their value(s) to remove from the AD object being managed if they are present. This is used for attributes that can contain multiple values, if the attribute only allows a single value, use set instead. Default: {}
set dictionary	A dictionary of all attributes and their value(s) to set on the AD object being managed. This will replace any existing values if they do not match the ones being requested. The order of attribute values are not checked only, only that the values requested are the only values on the object attribute. Set this to null or an empty list to clear any values for the attribute. Default: {}
category string	The category of the group. If a new group is created then security will be used by default. A security group can be associated with access control lists whereas distribution groups are typically associated with mailing distribution lists. This is the value set on the groupType LDAP attributes. Choices: "distribution" "security"
description string	The description of the AD object to set. This is the value set on the description LDAP attribute.
display_name string	The display name of the AD object to set. This is the value of the displayName LDAP attribute.
domain_password string	The password for domain_username.
domain_server string	Specified the Active Directory Domain Services instance to connect to. Can be in the form of an FQDN or NetBIOS name. If not specified then the value is based on the default domain of the computer running PowerShell.
domain_username string	The username to use when interacting with AD. If this is not set then the user that is used for authentication will be the connection user. Ansible will be unable to use the connection user unless auth is Kerberos with credential delegation or CredSSP, or become is used on the task.
homepage string	The homepage of the group. This is the value set on the wWWHomePage LDAP attribute.
identity string	The identity of the AD object used to find the AD object to manage. Must be specified if name is not set, when trying to rename the object with a new name, or when trying to move the object into a different path. The identity can be in the form of a GUID representing the objectGUID value, the userPrincipalName, sAMAccountName, objectSid, or distinguishedName. If omitted, the AD object to managed is selected by the distinguishedName using the format CN={{ name }},{{ path }}. If path is not defined, the defaultNamingContext is used instead.
managed_by string	The user or group that manages the group. The value can be in the form of a distinguishedName, objectGUID, objectSid, or sAMAccountName. This is the value set on the managedBy LDAP attribute.
members dictionary	The members of the group to set. The value is a dictionary that contains 3 keys, add, remove, and set. Each subkey is set to a list of AD principal objects to add, remove or set as the members of this AD group respectively. A principal can be in the form of a distinguishedName, objectGUID, objectSid, or sAMAccountName. The module will fail if it cannot find any of the members referenced.
add list / elements=string	Adds the principals specified as members of the group, keeping the existing membership if they are not specified.
remove list / elements=string	Removes the principals specified as members of the group, keeping the existing membership if they are not specified.
set list / elements=string	Sets only the principals specified as members of the group. Any other existing member will be removed from the group membership if not specified in this list. Set this to an empty list to remove all members from a group.
name string	The name of the AD object to manage. If identity is specified, and the name of the object it found does not match this value, the object will be renamed. This must be set when state=present or if identity is not set. This is not always going to be the same as the sAMAccountName for user objects. It is strictly the name of the object in the path specified. Use identity to select an object to manage by sAMAccountName.
path string	The path of the OU or the container where the new object should exist in. If no path is specified, the default is the defaultNamingContext of domain for most objects. The modules microsoft.ad.computer, microsoft.ad.user, and microsoft.ad.group have their own default path that is configured on the Active Directory domain controller.
protect_from_deletion boolean	Marks the object as protected from accidental deletion. This applies a deny access right from deleting the object normally and the protection needs to be removed before the object can be deleted through the GUI or any other tool outside Ansible. Using state=absent will still delete the AD object even if it is marked as protected from deletion. Choices: false true
sam_account_name string	The sAMAccountName value to set for the group. If omitted, the name value is used when creating a new group.
scope string	The scope of the group. This is required when state=present and the group does not already exist. See Group scope for more information on the various domain group scopes. This is the value set on the groupType LDAP attributes. Choices: "domainlocal" "global" "universal"
state string	Set to present to ensure the AD object exists. Set to absent to remove the AD object if it exists. The option name must be set when state=present. Using absent will recursively remove the AD object and any child objects if it’s a container. It will also remove the AD object even if the object is marked as protected from accidental deletion. Choices: "absent" "present" ← (default)

Attributes

Attribute	Support	Description
check_mode	Support: full	Can run in check_mode and return changed status prediction without modifying target
diff_mode	Support: full	Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode
platform	Platform: windows	Target OS/families that can be operated against

Notes

Note

• See win_group migration for help on migrating from community.windows.win_domain_group to this module.

• Some LDAP attributes can have only a single value set while others can have multiple. Some attributes are also read only and cannot be changed. It is recommended to look at the schema metadata for an attribute where System-Only are read only values and Is-Single-Value are attributes with only 1 value.

• Attempting to set multiple values to a Is-Single-Value attribute results in undefined behaviour.

• If running on a server that is not a Domain Controller, credential delegation through CredSSP or Kerberos with delegation must be used or the domain_username, domain_password must be set.

See Also

See also

microsoft.ad.domain

The official documentation on the microsoft.ad.domain module.

microsoft.ad.domain_controller

The official documentation on the microsoft.ad.domain_controller module.

microsoft.ad.membership

The official documentation on the microsoft.ad.membership module.

microsoft.ad.object_info

The official documentation on the microsoft.ad.object_info module.

microsoft.ad.object

The official documentation on the microsoft.ad.object module.

microsoft.ad.user

The official documentation on the microsoft.ad.user module.

Migration guide

This module replaces community.windows.win_domain_group. See the migration guide for details.

community.windows.win_domain_group

The official documentation on the community.windows.win_domain_group module.

Examples

- name: Ensure a group exists
  microsoft.ad.group:
    name: Cow
    scope: global

- name: Remove a group
  microsoft.ad.group:
    name: Cow
    state: absent

- name: Create a group in a custom path
  microsoft.ad.group:
    name: Cow
    scope: global
    path: OU=groups,DC=ansible,DC=local
    state: present

- name: Remove a group in a custom path
  microsoft.ad.group:
    name: Cow
    path: OU=groups,DC=ansible,DC=local
    state: absent

- name: Create group with delete protection enabled and custom attributes
  microsoft.ad.group:
    name: Ansible Users
    scope: domainlocal
    category: security
    homepage: www.ansible.com
    attributes:
      set:
        mail: [email protected]
    protect_from_deletion: true

- name: Change the path of a group
  microsoft.ad.group:
    name: MyGroup
    scope: global
    identity: S-1-5-21-2171456218-3732823212-122182344-1189
    path: OU=groups,DC=ansible,DC=local

- name: Add managed_by user
  microsoft.ad.group:
    name: Group Name Here
    scope: global
    managed_by: Domain Admins

- name: Add group and specify the AD domain services to use for the create
  microsoft.ad.group:
    name: Test Group
    domain_username: [email protected]
    domain_password: Password01!
    domain_server: corp-DC12.corp.ansible.com
    scope: domainlocal

- name: Add members to the group, preserving existing membership
  microsoft.ad.group:
    name: Test Group
    scope: domainlocal
    members:
      add:
      - Domain Admins
      - Domain Users

- name: Remove members from the group, preserving existing membership
  microsoft.ad.group:
    name: Test Group
    scope: domainlocal
    members:
      remove:
      - Domain Admins
      - Domain Users

- name: Replace entire membership of group
  microsoft.ad.group:
    name: Test Group
    scope: domainlocal
    members:
      set:
      - Domain Admins
      - Domain Users

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
distinguished_name string	The distinguishedName of the AD object that was created, removed, or edited. Returned: always Sample: "CN=MyGroup,CN=Users,,DC=domain,DC=test"
object_guid string	The objectGUID of the AD object that was created, removed, or edited. If a new object was created in check mode, a GUID of 0s will be returned. Returned: always Sample: "d84a141f-2b99-4f08-9da0-ed2d26864ba1"
sid string	The Security Identifier (SID) of the group managed. If a new group was created in check mode, the SID will be S-1-5-0000. Returned: always Sample: "S-1-5-21-4151808797-3430561092-2843464588-1104"

Authors

• Jordan Borean (@jborean93)

Collection links

Issue Tracker Repository (Sources) Report an issue Communication