netapp.elementsw.na_elementsw_network_interfaces module – NetApp Element Software Configure Node Network Interfaces

Note

This module is part of the netapp.elementsw collection (version 21.7.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.elementsw. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: netapp.elementsw.na_elementsw_network_interfaces.

New in netapp.elementsw 2.7.0

Synopsis

  • Configure Element SW Node Network Interfaces for Bond 1G and 10G IP addresses.

  • This module does not create interfaces, it expects the interfaces to already exists and can only modify them.

  • This module cannot set or modify the method (Loopback, manual, dhcp, static).

  • This module is not idempotent and does not support check_mode.

Requirements

The below requirements are needed on the host that executes this module.

  • The modules were developed with SolidFire 10.1

  • solidfire-sdk-python (1.1.0.92) or greater. Install using ‘pip install solidfire-sdk-python’

Parameters

Parameter

Comments

bond_10g

dictionary

settings for the Bond10G interface.

address

string

IP address for the interface.

bond_lacp_rate

string

Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode.

Slow - Packets are transmitted at 30 second intervals.

Fast - Packets are transmitted in 1 second intervals.

Choices:

  • "Fast"

  • "Slow"

bond_mode

string

Bonding mode.

Choices:

  • "ActivePassive"

  • "ALB"

  • "LACP"

dns_nameservers

list / elements=string

List of addresses for domain name servers.

list / elements=string

List of DNS search domains.

gateway

string

IP router network address to send packets out of the local network.

mtu

string

The largest packet size (in bytes) that the interface can transmit..

Must be greater than or equal to 1500 bytes.

netmask

string

subnet mask for the interface.

virtual_network_tag

string

The virtual network identifier of the interface (VLAN tag).

bond_1g

dictionary

settings for the Bond1G interface.

address

string

IP address for the interface.

bond_lacp_rate

string

Link Aggregation Control Protocol - useful only if LACP is selected as the Bond Mode.

Slow - Packets are transmitted at 30 second intervals.

Fast - Packets are transmitted in 1 second intervals.

Choices:

  • "Fast"

  • "Slow"

bond_mode

string

Bonding mode.

Choices:

  • "ActivePassive"

  • "ALB"

  • "LACP"

dns_nameservers

list / elements=string

List of addresses for domain name servers.

list / elements=string

List of DNS search domains.

gateway

string

IP router network address to send packets out of the local network.

mtu

string

The largest packet size (in bytes) that the interface can transmit..

Must be greater than or equal to 1500 bytes.

netmask

string

subnet mask for the interface.

virtual_network_tag

string

The virtual network identifier of the interface (VLAN tag).

bond_mode_10g

string

deprecated, use bond_10g option.

bond_mode_1g

string

deprecated, use bond_1g option.

dns_nameservers

list / elements=string

deprecated, use bond_1g and bond_10g options.

dns_search_domains

list / elements=string

deprecated, use bond_1g and bond_10g options.

gateway_address_10g

string

deprecated, use bond_10g option.

gateway_address_1g

string

deprecated, use bond_1g option.

hostname

string / required

The hostname or IP address of the SolidFire cluster.

For na_elementsw_cluster, the Management IP (MIP) or hostname of the node to initiate the cluster creation from.

ip_address_10g

string

deprecated, use bond_10g option.

ip_address_1g

string

deprecated, use bond_1g option.

lacp_10g

string

deprecated, use bond_10g option.

lacp_1g

string

deprecated, use bond_1g option.

method

string

deprecated, this option would trigger a ‘updated failed’ error

mtu_10g

string

deprecated, use bond_10g option.

mtu_1g

string

deprecated, use bond_1g option.

password

aliases: pass

string / required

Password for the specified user.

subnet_10g

string

deprecated, use bond_10g option.

subnet_1g

string

deprecated, use bond_1g option.

username

aliases: user

string / required

Please ensure that the user has the adequate permissions. For more information, please read the official documentation https://mysupport.netapp.com/documentation/docweb/index.html?productID%3D62636%26language%3Den-US.

virtual_network_tag

string

deprecated, use bond_1g and bond_10g options.

Notes

Note

  • The modules prefixed with na\\_elementsw are built to support the SolidFire storage platform.

Examples

- name: Set Node network interfaces configuration for Bond 1G and 10G properties
  tags:
  - elementsw_network_interfaces
  na_elementsw_network_interfaces:
    hostname: "{{ elementsw_hostname }}"
    username: "{{ elementsw_username }}"
    password: "{{ elementsw_password }}"
    bond_1g:
      address: 10.253.168.131
      netmask: 255.255.248.0
      gateway: 10.253.168.1
      mtu: '1500'
      bond_mode: ActivePassive
      dns_nameservers: dns1,dns2
      dns_search: domain1,domain2
    bond_10g:
      address: 10.253.1.202
      netmask: 255.255.255.192
      gateway: 10.253.1.193
      mtu: '9000'
      bond_mode: LACP
      bond_lacp_rate: Fast
      virtual_network_tag: vnet_tag

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

msg

string

Success message

Returned: success

Authors

  • NetApp Ansible Team (@carchi8py)