vyos.vyos.vyos_firewall_rules module – FIREWALL rules resource module

Note

This module is part of the vyos.vyos collection (version 4.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_firewall_rules.

New in vyos.vyos 1.0.0

Synopsis

  • This module manages firewall rule-set attributes on VyOS devices

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of Firewall rule-set options.

afi

string / required

Specifies the type of rule-set.

Choices:

  • "ipv4"

  • "ipv6"

rule_sets

list / elements=dictionary

The Firewall rule-set list.

default_action

string

Default action for rule-set.

drop (Drop if no prior rules are hit (default))

reject (Drop and notify source if no prior rules are hit)

accept (Accept if no prior rules are hit)

Choices:

  • "drop"

  • "reject"

  • "accept"

description

string

Rule set description.

enable_default_log

boolean

Option to log packets hitting default-action.

Choices:

  • false

  • true

name

string

Firewall rule set name.

rules

list / elements=dictionary

A dictionary that specifies the rule-set configurations.

action

string

Specifying the action.

Choices:

  • "drop"

  • "reject"

  • "accept"

  • "inspect"

description

string

Description of this rule.

destination

dictionary

Specifying the destination parameters.

address

string

Destination ip address subnet or range.

IPv4/6 address, subnet or range to match.

Match everything except the specified address, subnet or range.

Destination ip address subnet or range.

group

dictionary

Destination group.

address_group

string

Group of addresses.

network_group

string

Group of networks.

port_group

string

Group of ports.

port

string

Multiple destination ports can be specified as a comma-separated list.

The whole list can also be “negated” using ‘!’.

For example:’!22,telnet,http,123,1001-1005’.

disable

aliases: disabled

boolean

Option to disable firewall rule.

Choices:

  • false

  • true

fragment

string

IP fragment match.

Choices:

  • "match-frag"

  • "match-non-frag"

icmp

dictionary

ICMP type and code information.

code

integer

ICMP code.

type

integer

ICMP type.

type_name

string

ICMP type-name.

Choices:

  • "any"

  • "echo-reply"

  • "destination-unreachable"

  • "network-unreachable"

  • "host-unreachable"

  • "protocol-unreachable"

  • "port-unreachable"

  • "fragmentation-needed"

  • "source-route-failed"

  • "network-unknown"

  • "host-unknown"

  • "network-prohibited"

  • "host-prohibited"

  • "TOS-network-unreachable"

  • "TOS-host-unreachable"

  • "communication-prohibited"

  • "host-precedence-violation"

  • "precedence-cutoff"

  • "source-quench"

  • "redirect"

  • "network-redirect"

  • "host-redirect"

  • "TOS-network-redirect"

  • "TOS-host-redirect"

  • "echo-request"

  • "router-advertisement"

  • "router-solicitation"

  • "time-exceeded"

  • "ttl-zero-during-transit"

  • "ttl-zero-during-reassembly"

  • "parameter-problem"

  • "ip-header-bad"

  • "required-option-missing"

  • "timestamp-request"

  • "timestamp-reply"

  • "address-mask-request"

  • "address-mask-reply"

  • "ping"

  • "pong"

  • "ttl-exceeded"

ipsec

string

Inbound ip sec packets.

Choices:

  • "match-ipsec"

  • "match-none"

limit

dictionary

Rate limit using a token bucket filter.

burst

integer

Maximum number of packets to allow in excess of rate.

rate

dictionary

format for rate (integer/time unit).

any one of second, minute, hour or day may be used to specify time unit.

eg. 1/second implies rule to be matched at an average of once per second.

number

integer

This is the integer value.

unit

string

This is the time unit.

log

string

Option to log packets matching rule

Choices:

  • "disable"

  • "enable"

number

integer / required

Rule number.

p2p

list / elements=dictionary

P2P application packets.

application

string

Name of the application.

Choices:

  • "all"

  • "applejuice"

  • "bittorrent"

  • "directconnect"

  • "edonkey"

  • "gnutella"

  • "kazaa"

protocol

string

Protocol to match (protocol name in /etc/protocols or protocol number or all).

<text> IP protocol name from /etc/protocols (e.g. “tcp” or “udp”).

<0-255> IP protocol number.

tcp_udp Both TCP and UDP.

all All IP protocols.

(!)All IP protocols except for the specified name or number.

recent

dictionary

Parameters for matching recently seen sources.

count

integer

Source addresses seen more than N times.

time

integer

Source addresses seen in the last N seconds.

source

dictionary

Source parameters.

address

string

Source ip address subnet or range.

IPv4/6 address, subnet or range to match.

Match everything except the specified address, subnet or range.

Source ip address subnet or range.

group

dictionary

Source group.

address_group

string

Group of addresses.

network_group

string

Group of networks.

port_group

string

Group of ports.

mac_address

string

<MAC address> MAC address to match.

<!MAC address> Match everything except the specified MAC address.

port

string

Multiple source ports can be specified as a comma-separated list.

The whole list can also be “negated” using ‘!’.

For example:’!22,telnet,http,123,1001-1005’.

state

dictionary

Session state.

established

boolean

Established state.

Choices:

  • false

  • true

invalid

boolean

Invalid state.

Choices:

  • false

  • true

new

boolean

New state.

Choices:

  • false

  • true

boolean

Related state.

Choices:

  • false

  • true

tcp

dictionary

TCP flags to match.

flags

string

TCP flags to be matched.

time

dictionary

Time to match rule.

monthdays

string

Monthdays to match rule on.

startdate

string

Date to start matching rule.

starttime

string

Time of day to start matching rule.

stopdate

string

Date to stop matching rule.

stoptime

string

Time of day to stop matching rule.

utc

boolean

Interpret times for startdate, stopdate, starttime and stoptime to be UTC.

Choices:

  • false

  • true

weekdays

string

Weekdays to match rule on.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep firewall.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

Examples

# Using deleted to delete firewall rules based on rule-set name
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'
#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
      rule_sets:
      - name: Downlink
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name Downlink"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall group address-group 'inbound'


# Using deleted to delete firewall rules based on afi
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'

#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'


# Using deleted to delete all the the firewall rules when provided config is empty
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'
#
- name: Delete attributes of given firewall rules.
  vyos.vyos.vyos_firewall_rules:
    config:
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
#    "before": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#    "commands": [
#        "delete firewall name"
#    ]
#
# "after": []
# After state
# ------------
# vyos@vyos# run show configuration commands | grep firewall
# set firewall group address-group 'inbound'


# Using merged
#
# Before state:
# -------------
#
# vyos@vyos# run show  configuration commands | grep firewall
# set firewall group address-group 'inbound'
#
- name: Merge the provided configuration with the existing running configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
        rules:
        - number: 1
          action: accept
          description: Fwipv6-Rule 1 is configured by Ansible
          ipsec: match-ipsec
        - number: 2
          action: accept
          description: Fwipv6-Rule 2 is configured by Ansible
          ipsec: match-ipsec

    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 102
          action: reject
          description: Rule 102 is configured by Ansible
          ipsec: match-ipsec
        - number: 103
          action: accept
          description: Rule 103 is configured by Ansible
          destination:
            group:
              address_group: inbound
          source:
            address: 192.0.2.0
          state:
            established: true
            new: false
            invalid: false
            related: true
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# before": []
#
#    "commands": [
#       "set firewall ipv6-name UPLINK default-action 'accept'",
#       "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'",
#       "set firewall ipv6-name UPLINK rule 1 action 'accept'",
#       "set firewall ipv6-name UPLINK rule 1",
#       "set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'",
#       "set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'",
#       "set firewall ipv6-name UPLINK rule 2 action 'accept'",
#       "set firewall ipv6-name UPLINK rule 2",
#       "set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'",
#       "set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'",
#       "set firewall name INBOUND default-action 'accept'",
#       "set firewall name INBOUND description 'IPv4 INBOUND rule set'",
#       "set firewall name INBOUND rule 101 action 'accept'",
#       "set firewall name INBOUND rule 101",
#       "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'",
#       "set firewall name INBOUND rule 101 ipsec 'match-ipsec'",
#       "set firewall name INBOUND rule 102 action 'reject'",
#       "set firewall name INBOUND rule 102",
#       "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'",
#       "set firewall name INBOUND rule 102 ipsec 'match-ipsec'",
#       "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'",
#       "set firewall name INBOUND rule 103 destination group address-group inbound",
#       "set firewall name INBOUND rule 103",
#       "set firewall name INBOUND rule 103 source address 192.0.2.0",
#       "set firewall name INBOUND rule 103 state established enable",
#       "set firewall name INBOUND rule 103 state related enable",
#       "set firewall name INBOUND rule 103 state invalid disable",
#       "set firewall name INBOUND rule 103 state new disable",
#       "set firewall name INBOUND rule 103 action 'accept'"
#    ]
#
# "after": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'
#
- name: Replace device configurations of listed firewall rules with provided configurations
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 104
          action: reject
          description: Rule 104 is configured by Ansible
          ipsec: match-none
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# "commands": [
#        "delete firewall ipv6-name UPLINK rule 1",
#        "delete firewall ipv6-name UPLINK rule 2",
#        "delete firewall name INBOUND rule 102",
#        "delete firewall name INBOUND rule 103",
#        "set firewall name INBOUND rule 104 action 'reject'",
#        "set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'",
#        "set firewall name INBOUND rule 104",
#        "set firewall name INBOUND rule 104 ipsec 'match-none'"
#    ]
#
#    "after": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK"
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 104 is configured by Ansible",
#                            "ipsec": "match-none",
#                            "number": 104
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 104 action 'reject'
# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'
# set firewall name INBOUND rule 104 ipsec 'match-none'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 104 action 'reject'
# set firewall name INBOUND rule 104 description 'Rule 104 is configured by Ansible'
# set firewall name INBOUND rule 104 ipsec 'match-none'
#
- name: Overrides all device configuration with provided configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv4
      rule_sets:
      - name: Downlink
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 501
          action: accept
          description: Rule 501 is configured by Ansible
          ipsec: match-ipsec
        - number: 502
          action: reject
          description: Rule 502 is configured by Ansible
          ipsec: match-ipsec
    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
# "before": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK"
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 104 is configured by Ansible",
#                            "ipsec": "match-none",
#                            "number": 104
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
#    "commands": [
#        "delete firewall ipv6-name UPLINK",
#        "delete firewall name INBOUND",
#        "set firewall name Downlink default-action 'accept'",
#        "set firewall name Downlink description 'IPv4 INBOUND rule set'",
#        "set firewall name Downlink rule 501 action 'accept'",
#        "set firewall name Downlink rule 501",
#        "set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'",
#        "set firewall name Downlink rule 501 ipsec 'match-ipsec'",
#        "set firewall name Downlink rule 502 action 'reject'",
#        "set firewall name Downlink rule 502",
#        "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'",
#        "set firewall name Downlink rule 502 ipsec 'match-ipsec'"
#
#
#    "after": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#               }
#            ]
#        }
#    ]
#
#
# After state
# ------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall name Downlink default-action 'accept'
# set firewall name Downlink description 'IPv4 INBOUND rule set'
# set firewall name Downlink rule 501 action 'accept'
# set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
# set firewall name Downlink rule 501 ipsec 'match-ipsec'
# set firewall name Downlink rule 502 action 'reject'
# set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
# set firewall name Downlink rule 502 ipsec 'match-ipsec'


# Using gathered
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'
#
- name: Gather listed firewall rules with provided configurations
  vyos.vyos.vyos_firewall_rules:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration commands| grep firewall
# set firewall group address-group 'inbound'
# set firewall ipv6-name UPLINK default-action 'accept'
# set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'
# set firewall ipv6-name UPLINK rule 1 action 'accept'
# set firewall ipv6-name UPLINK rule 1 description 'Fwipv6-Rule 1 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 1 ipsec 'match-ipsec'
# set firewall ipv6-name UPLINK rule 2 action 'accept'
# set firewall ipv6-name UPLINK rule 2 description 'Fwipv6-Rule 2 is configured by Ansible'
# set firewall ipv6-name UPLINK rule 2 ipsec 'match-ipsec'
# set firewall name INBOUND default-action 'accept'
# set firewall name INBOUND description 'IPv4 INBOUND rule set'
# set firewall name INBOUND rule 101 action 'accept'
# set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'
# set firewall name INBOUND rule 101 ipsec 'match-ipsec'
# set firewall name INBOUND rule 102 action 'reject'
# set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'
# set firewall name INBOUND rule 102 ipsec 'match-ipsec'
# set firewall name INBOUND rule 103 action 'accept'
# set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'
# set firewall name INBOUND rule 103 destination group address-group 'inbound'
# set firewall name INBOUND rule 103 source address '192.0.2.0'
# set firewall name INBOUND rule 103 state established 'enable'
# set firewall name INBOUND rule 103 state invalid 'disable'
# set firewall name INBOUND rule 103 state new 'disable'
# set firewall name INBOUND rule 103 state related 'enable'


# Using rendered
#
#
- name: Render the commands for provided  configuration
  vyos.vyos.vyos_firewall_rules:
    config:
    - afi: ipv6
      rule_sets:
      - name: UPLINK
        description: This is ipv6 specific rule-set
        default_action: accept
    - afi: ipv4
      rule_sets:
      - name: INBOUND
        description: IPv4 INBOUND rule set
        default_action: accept
        rules:
        - number: 101
          action: accept
          description: Rule 101 is configured by Ansible
          ipsec: match-ipsec
        - number: 102
          action: reject
          description: Rule 102 is configured by Ansible
          ipsec: match-ipsec
        - number: 103
          action: accept
          description: Rule 103 is configured by Ansible
          destination:
            group:
              address_group: inbound
          source:
            address: 192.0.2.0
          state:
            established: true
            new: false
            invalid: false
            related: true
    state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "set firewall ipv6-name UPLINK default-action 'accept'",
#        "set firewall ipv6-name UPLINK description 'This is ipv6 specific rule-set'",
#        "set firewall name INBOUND default-action 'accept'",
#        "set firewall name INBOUND description 'IPv4 INBOUND rule set'",
#        "set firewall name INBOUND rule 101 action 'accept'",
#        "set firewall name INBOUND rule 101",
#        "set firewall name INBOUND rule 101 description 'Rule 101 is configured by Ansible'",
#        "set firewall name INBOUND rule 101 ipsec 'match-ipsec'",
#        "set firewall name INBOUND rule 102 action 'reject'",
#        "set firewall name INBOUND rule 102",
#        "set firewall name INBOUND rule 102 description 'Rule 102 is configured by Ansible'",
#        "set firewall name INBOUND rule 102 ipsec 'match-ipsec'",
#        "set firewall name INBOUND rule 103 description 'Rule 103 is configured by Ansible'",
#        "set firewall name INBOUND rule 103 destination group address-group inbound",
#        "set firewall name INBOUND rule 103",
#        "set firewall name INBOUND rule 103 source address 192.0.2.0",
#        "set firewall name INBOUND rule 103 state established enable",
#        "set firewall name INBOUND rule 103 state related enable",
#        "set firewall name INBOUND rule 103 state invalid disable",
#        "set firewall name INBOUND rule 103 state new disable",
#        "set firewall name INBOUND rule 103 action 'accept'"
#    ]


# Using parsed
#
#
- name: Parsed the provided input commands.
  vyos.vyos.vyos_firewall_rules:
    running_config:
      "set firewall group address-group 'inbound'
       set firewall name Downlink default-action 'accept'
       set firewall name Downlink description 'IPv4 INBOUND rule set'
       set firewall name Downlink rule 501 action 'accept'
       set firewall name Downlink rule 501 description 'Rule 501 is configured by Ansible'
       set firewall name Downlink rule 501 ipsec 'match-ipsec'
       set firewall name Downlink rule 502 action 'reject'
       set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'
       set firewall name Downlink rule 502 ipsec 'match-ipsec'"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "Downlink",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 501 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 501
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 502 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 502
#                        }
#                    ]
#                }
#            ]
#        }
#    ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration model invocation.

Returned: when changed

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

before

list / elements=string

The configuration prior to the model invocation.

Returned: always

Sample: ["The configuration returned will always be in the same format\n of the parameters above.\n"]

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["set firewall name Downlink default-action 'accept'", "set firewall name Downlink description 'IPv4 INBOUND rule set'", "set firewall name Downlink rule 501 action 'accept'", "set firewall name Downlink rule 502 description 'Rule 502 is configured by Ansible'", "set firewall name Downlink rule 502 ipsec 'match-ipsec'"]

Authors

  • Rohit Thakur (@rohitthakur2590)