strategy plugin tells Ansible how to order multiple tasks on multiple hosts. Strategy is set at the playbook level.
The default strategy is
linear. With strategy set to
linear, Ansible waits until the current task has run on all hosts before starting the next task on any host. Ansible may have forks free, but will not use them until all hosts have completed the current task. If each task in your playbook must succeed on all hosts before you run the next task, use the
free strategy, Ansible uses available forks to execute tasks on each host as quickly as possible. Even if an earlier task is still running on one host, Ansible executes later tasks on other hosts. The
free strategy uses available forks more efficiently. If your playbook stalls on each task, waiting for one slow host, consider using
strategy: free to boost overall performance.
show running command is the most resource-intensive command to execute on a network device, because of the way queries are handled by the network OS. Using the command in your Ansible playbook will slow performance significantly, especially on large devices; repeating it will multiply the performance hit. If you have a playbook that checks the running config, then executes changes, then checks the running config again, you should expect that playbook to be very slow.
Network modules support the use of a proxy or jump host with the
ProxyCommand parameter. However, when you use a jump host, Ansible must open a new SSH connection for every task, even if you are using a persistent connection type (
netconf). To maximize the performance benefits of the persistent connection types introduced in version 2.5, avoid using jump hosts whenever possible.
Every time Ansible runs a task, it forks its own process. The
--forks parameter defines the number of concurrent tasks - if you retain the default setting, which is
--forks=5, and you are running a playbook on 10 hosts, five of those hosts will have to wait until a fork is available. Of course, the more forks you allow, the more memory and processing power Ansible will use. Since most network tasks are run on the control host, this means your laptop can quickly become cpu- or memory-bound.
Ansible replaces any string marked
no_log, including passwords, with
******** in Ansible output. This is done by design, to protect your sensitive data. Most users are happy to have their passwords redacted. However, Ansible replaces every string that matches your password with
********. If you use a common word for your password, this can be a problem. For example, if you choose
Admin as your password, Ansible will replace every instance of the word
******** in your output. This may make your output harder to read. To avoid this problem, select a secure password that will not occur elsewhere in your Ansible output.
When you issue commands directly on a network device, you can use abbreviated commands. For example,
int g1/0/11 and
interface GigabitEthernet1/0/11 do the same thing;
shutdown do the same thing. Ansible Network
*_command modules work with abbreviations, because they run commands through the network OS.
When committing configuration, however, the network OS converts abbreviations into long-form commands. Whether you use
GigabitEthernet1/0/11, the result in the configuration is the same:
*_config modules compare the text of the commands you specify in
lines to the text in the configuration. If you use
shut in the
lines section of your task, and the configuration reads
shutdown, the module returns
changed=true even though the configuration is already correct. Your task will update the configuration every time it runs.
To avoid this problem, use long-form commands with the
- hosts: all
parents: interface GigabitEthernet1/0/11