amazon.aws.elb_application_lb module – Manage an Application Load Balancer

Note

This module is part of the amazon.aws collection (version 6.5.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install amazon.aws. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: amazon.aws.elb_application_lb.

New in amazon.aws 5.0.0

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 3.6

  • boto3 >= 1.22.0

  • botocore >= 1.25.0

Parameters

Parameter

Comments

access_key

aliases: aws_access_key_id, aws_access_key, ec2_access_key

string

AWS access key ID.

See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys.

The AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variables may also be used in decreasing order of preference.

The aws_access_key and profile options are mutually exclusive.

The aws_access_key_id alias was added in release 5.1.0 for consistency with the AWS botocore SDK.

The ec2_access_key alias has been deprecated and will be removed in a release after 2024-12-01.

Support for the EC2_ACCESS_KEY environment variable has been deprecated and will be removed in a release after 2024-12-01.

access_logs_enabled

boolean

Whether or not to enable access logs.

When set, access_logs_s3_bucket must also be set.

Choices:

  • false

  • true

access_logs_s3_bucket

string

The name of the S3 bucket for the access logs.

The bucket must exist in the same region as the load balancer and have a bucket policy that grants Elastic Load Balancing permission to write to the bucket.

Required if access logs in Amazon S3 are enabled.

When set, access_logs_enabled must also be set.

access_logs_s3_prefix

string

The prefix for the log location in the S3 bucket.

If you don’t specify a prefix, the access logs are stored in the root of the bucket.

Cannot begin or end with a slash.

aws_ca_bundle

path

The location of a CA Bundle to use when validating SSL certificates.

The AWS_CA_BUNDLE environment variable may also be used.

aws_config

dictionary

A dictionary to modify the botocore configuration.

Parameters can be found in the AWS documentation https://botocore.amazonaws.com/v1/documentation/api/latest/reference/config.html#botocore.config.Config.

debug_botocore_endpoint_logs

boolean

Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook.

The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.

Choices:

  • false ← (default)

  • true

deletion_protection

boolean

Indicates whether deletion protection for the ALB is enabled.

Defaults to False.

Choices:

  • false

  • true

endpoint_url

aliases: ec2_url, aws_endpoint_url, s3_url

string

URL to connect to instead of the default AWS endpoints. While this can be used to connection to other AWS-compatible services the amazon.aws and community.aws collections are only tested against AWS.

The AWS_URL or EC2_URL environment variables may also be used, in decreasing order of preference.

The ec2_url and s3_url aliases have been deprecated and will be removed in a release after 2024-12-01.

Support for the EC2_URL environment variable has been deprecated and will be removed in a release after 2024-12-01.

http2

boolean

Indicates whether to enable HTTP2 routing.

Defaults to True.

Choices:

  • false

  • true

http_desync_mitigation_mode

string

added in community.aws 3.2.0

Determines how the load balancer handles requests that might pose a security risk to an application.

Defaults to 'defensive'

Choices:

  • "monitor"

  • "defensive"

  • "strictest"

http_drop_invalid_header_fields

boolean

added in community.aws 3.2.0

Indicates whether HTTP headers with invalid header fields are removed by the load balancer True or routed to targets False.

Defaults to False.

Choices:

  • false

  • true

http_x_amzn_tls_version_and_cipher_suite

boolean

added in community.aws 3.2.0

Indicates whether the two headers are added to the client request before sending it to the target.

Defaults to False.

Choices:

  • false

  • true

http_xff_client_port

boolean

added in community.aws 3.2.0

Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer.

Defaults to False.

Choices:

  • false

  • true

idle_timeout

integer

The number of seconds to wait before an idle connection is closed.

ip_address_type

string

Sets the type of IP addresses used by the subnets of the specified Application Load Balancer.

Choices:

  • "ipv4"

  • "dualstack"

listeners

list / elements=dictionary

A list of dicts containing listeners to attach to the ALB. See examples for detail of the dict required. Note that listener keys are CamelCased.

Certificates

list / elements=dictionary

The SSL server certificate.

CertificateArn

string

The Amazon Resource Name (ARN) of the certificate.

DefaultActions

list / elements=dictionary / required

The default actions for the listener.

TargetGroupArn

string

The Amazon Resource Name (ARN) of the target group.

Mutually exclusive with TargetGroupName.

TargetGroupName

string

The name of the target group.

Mutually exclusive with TargetGroupArn.

Type

string

The type of action.

Port

integer / required

The port on which the load balancer is listening.

Protocol

string / required

The protocol for connections from clients to the load balancer.

Rules

list / elements=dictionary

A list of ALB Listener Rules.

For the complete documentation of possible Conditions and Actions please see the boto3 documentation:

https://boto3.amazonaws.com/v1/documentation/api/latest/reference/services/elbv2.html#ElasticLoadBalancingv2.Client.create_rule

Keep in mind that AWS uses default values for parameters that are not requested. For example for Scope and SessionTimeout when the action type is authenticate-oidc.

Actions

list / elements=dictionary

Actions to apply if all of the rule’s conditions are met.

Conditions

list / elements=dictionary

Conditions which must be met for the actions to be applied.

Priority

integer

The rule priority.

SslPolicy

string

The security policy that defines which ciphers and protocols are supported.

name

string / required

The name of the load balancer. This name must be unique within your AWS account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end with a hyphen.

profile

aliases: aws_profile

string

A named AWS profile to use for authentication.

See the AWS documentation for more information about named profiles https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html.

The AWS_PROFILE environment variable may also be used.

The profile option is mutually exclusive with the aws_access_key, aws_secret_key and security_token options.

purge_listeners

boolean

If true, existing listeners will be purged from the ALB to match exactly what is defined by listeners parameter.

If the listeners parameter is not set then listeners will not be modified.

Choices:

  • false

  • true ← (default)

purge_rules

boolean

When set to no, keep the existing load balancer rules in place. Will modify and add, but will not delete.

Choices:

  • false

  • true ← (default)

purge_tags

boolean

If purge_tags=true and tags is set, existing tags will be purged from the resource to match exactly what is defined by tags parameter.

If the tags parameter is not set then tags will not be modified, even if purge_tags=True.

Tag keys beginning with aws: are reserved by Amazon and can not be modified. As such they will be ignored for the purposes of the purge_tags parameter. See the Amazon documentation for more information https://docs.aws.amazon.com/general/latest/gr/aws_tagging.html#tag-conventions.

Choices:

  • false

  • true ← (default)

region

aliases: aws_region, ec2_region

string

The AWS region to use.

For global services such as IAM, Route53 and CloudFront, region is ignored.

The AWS_REGION or EC2_REGION environment variables may also be used.

See the Amazon AWS documentation for more information http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region.

The ec2_region alias has been deprecated and will be removed in a release after 2024-12-01

Support for the EC2_REGION environment variable has been deprecated and will be removed in a release after 2024-12-01.

scheme

string

Internet-facing or internal load balancer. An ALB scheme can not be modified after creation.

Choices:

  • "internet-facing" ← (default)

  • "internal"

secret_key

aliases: aws_secret_access_key, aws_secret_key, ec2_secret_key

string

AWS secret access key.

See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys.

The AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variables may also be used in decreasing order of preference.

The secret_key and profile options are mutually exclusive.

The aws_secret_access_key alias was added in release 5.1.0 for consistency with the AWS botocore SDK.

The ec2_secret_key alias has been deprecated and will be removed in a release after 2024-12-01.

Support for the EC2_SECRET_KEY environment variable has been deprecated and will be removed in a release after 2024-12-01.

security_groups

list / elements=string

A list of the names or IDs of the security groups to assign to the load balancer.

Required if state=present.

If [], the VPC’s default security group will be used.

session_token

aliases: aws_session_token, security_token, aws_security_token, access_token

string

AWS STS session token for use with temporary credentials.

See the AWS documentation for more information about access tokens https://docs.aws.amazon.com/general/latest/gr/aws-sec-cred-types.html#access-keys-and-secret-access-keys.

The AWS_SESSION_TOKEN, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variables may also be used in decreasing order of preference.

The security_token and profile options are mutually exclusive.

Aliases aws_session_token and session_token were added in release 3.2.0, with the parameter being renamed from security_token to session_token in release 6.0.0.

The security_token, aws_security_token, and access_token aliases have been deprecated and will be removed in a release after 2024-12-01.

Support for the EC2_SECRET_KEY and AWS_SECURITY_TOKEN environment variables has been deprecated and will be removed in a release after 2024-12-01.

state

string

Create or destroy the load balancer.

Choices:

  • "present" ← (default)

  • "absent"

subnets

list / elements=string

A list of the IDs of the subnets to attach to the load balancer. You can specify only one subnet per Availability Zone. You must specify subnets from at least two Availability Zones.

Required if state=present.

tags

aliases: resource_tags

dictionary

A dictionary representing the tags to be applied to the resource.

If the tags parameter is not set then tags will not be modified.

validate_certs

boolean

When set to false, SSL certificates will not be validated for communication with the AWS APIs.

Setting validate_certs=false is strongly discouraged, as an alternative, consider setting aws_ca_bundle instead.

Choices:

  • false

  • true ← (default)

waf_fail_open

boolean

added in community.aws 3.2.0

Indicates whether to allow a AWS WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF.

Defaults to False.

Choices:

  • false

  • true

wait

boolean

Wait for the load balancer to have a state of ‘active’ before completing. A status check is performed every 15 seconds until a successful state is reached. An error is returned after 40 failed checks.

Choices:

  • false ← (default)

  • true

wait_timeout

integer

The time in seconds to use in conjunction with wait.

Notes

Note

  • Listeners are matched based on port. If a listener’s port is changed then a new listener will be created.

  • Listener rules are matched based on priority. If a rule’s priority is changed then a new rule will be created.

  • Caution: For modules, environment variables and configuration files are read from the Ansible ‘host’ context and not the ‘controller’ context. As such, files may need to be explicitly copied to the ‘host’. For lookup and connection plugins, environment variables and configuration files are read from the Ansible ‘controller’ context and not the ‘host’ context.

  • The AWS SDK (boto3) that Ansible uses may also read defaults for credentials and other settings, such as the region, from its configuration files in the Ansible ‘host’ context (typically ~/.aws/credentials). See https://boto3.amazonaws.com/v1/documentation/api/latest/guide/credentials.html for more information.

Examples

# Note: These examples do not set authentication details, see the AWS Guide for details.

# Create an ALB and attach a listener
- amazon.aws.elb_application_lb:
    name: myalb
    security_groups:
      - sg-12345678
      - my-sec-group
    subnets:
      - subnet-012345678
      - subnet-abcdef000
    listeners:
      - Protocol: HTTP # Required. The protocol for connections from clients to the load balancer (HTTP or HTTPS) (case-sensitive).
        Port: 80 # Required. The port on which the load balancer is listening.
        # The security policy that defines which ciphers and protocols are supported. The default is the current predefined security policy.
        SslPolicy: ELBSecurityPolicy-2015-05
        Certificates: # The ARN of the certificate (only one certficate ARN should be provided)
          - CertificateArn: arn:aws:iam::123456789012:server-certificate/test.domain.com
        DefaultActions:
          - Type: forward # Required.
            TargetGroupName: # Required. The name of the target group
    state: present

# Create an ALB and attach a listener with logging enabled
- amazon.aws.elb_application_lb:
    access_logs_enabled: true
    access_logs_s3_bucket: mybucket
    access_logs_s3_prefix: "logs"
    name: myalb
    security_groups:
      - sg-12345678
      - my-sec-group
    subnets:
      - subnet-012345678
      - subnet-abcdef000
    listeners:
      - Protocol: HTTP # Required. The protocol for connections from clients to the load balancer (HTTP or HTTPS) (case-sensitive).
        Port: 80 # Required. The port on which the load balancer is listening.
        # The security policy that defines which ciphers and protocols are supported. The default is the current predefined security policy.
        SslPolicy: ELBSecurityPolicy-2015-05
        Certificates: # The ARN of the certificate (only one certficate ARN should be provided)
          - CertificateArn: arn:aws:iam::123456789012:server-certificate/test.domain.com
        DefaultActions:
          - Type: forward # Required.
            TargetGroupName: # Required. The name of the target group
    state: present

# Create an ALB with listeners and rules
- amazon.aws.elb_application_lb:
    name: test-alb
    subnets:
      - subnet-12345678
      - subnet-87654321
    security_groups:
      - sg-12345678
    scheme: internal
    listeners:
      - Protocol: HTTPS
        Port: 443
        DefaultActions:
          - Type: forward
            TargetGroupName: test-target-group
        Certificates:
          - CertificateArn: arn:aws:iam::123456789012:server-certificate/test.domain.com
        SslPolicy: ELBSecurityPolicy-2015-05
        Rules:
          - Conditions:
              - Field: path-pattern
                Values:
                  - '/test'
            Priority: '1'
            Actions:
              - TargetGroupName: test-target-group
                Type: forward
          - Conditions:
              - Field: path-pattern
                Values:
                  - "/redirect-path/*"
            Priority: '2'
            Actions:
              - Type: redirect
                RedirectConfig:
                  Host: "#{host}"
                  Path: "/example/redir" # or /#{path}
                  Port: "#{port}"
                  Protocol: "#{protocol}"
                  Query: "#{query}"
                  StatusCode: "HTTP_302" # or HTTP_301
          - Conditions:
              - Field: path-pattern
                Values:
                  - "/fixed-response-path/"
            Priority: '3'
            Actions:
              - Type: fixed-response
                FixedResponseConfig:
                  ContentType: "text/plain"
                  MessageBody: "This is the page you're looking for"
                  StatusCode: "200"
          - Conditions:
              - Field: host-header
                Values:
                  - "hostname.domain.com"
                  - "alternate.domain.com"
            Priority: '4'
            Actions:
              - TargetGroupName: test-target-group
                Type: forward
    state: present

# Remove an ALB
- amazon.aws.elb_application_lb:
    name: myalb
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

access_logs_s3_bucket

string

The name of the S3 bucket for the access logs.

Returned: when state is present

Sample: "mys3bucket"

access_logs_s3_enabled

boolean

Indicates whether access logs stored in Amazon S3 are enabled.

Returned: when state is present

Sample: true

access_logs_s3_prefix

string

The prefix for the location in the S3 bucket.

Returned: when state is present

Sample: "my/logs"

availability_zones

list / elements=string

The Availability Zones for the load balancer.

Returned: when state is present

Sample: [{"load_balancer_addresses": [], "subnet_id": "subnet-aabbccddff", "zone_name": "ap-southeast-2a"}]

canonical_hosted_zone_id

string

The ID of the Amazon Route 53 hosted zone associated with the load balancer.

Returned: when state is present

Sample: "ABCDEF12345678"

changed

boolean

Whether an ALB was created/updated/deleted

Returned: always

Sample: true

created_time

string

The date and time the load balancer was created.

Returned: when state is present

Sample: "2015-02-12T02:14:02+00:00"

deletion_protection_enabled

boolean

Indicates whether deletion protection is enabled.

Returned: when state is present

Sample: true

dns_name

string

The public DNS name of the load balancer.

Returned: when state is present

Sample: "internal-my-elb-123456789.ap-southeast-2.elb.amazonaws.com"

idle_timeout_timeout_seconds

integer

The idle timeout value, in seconds.

Returned: when state is present

Sample: 60

ip_address_type

string

The type of IP addresses used by the subnets for the load balancer.

Returned: when state is present

Sample: "ipv4"

listeners

complex

Information about the listeners.

Returned: when state is present

certificates

complex

The SSL server certificate.

Returned: when state is present

certificate_arn

string

The Amazon Resource Name (ARN) of the certificate.

Returned: when state is present

Sample: ""

default_actions

string

The default actions for the listener.

Returned: when state is present

target_group_arn

string

The Amazon Resource Name (ARN) of the target group.

Returned: when state is present

Sample: ""

type

string

The type of action.

Returned: when state is present

Sample: ""

listener_arn

string

The Amazon Resource Name (ARN) of the listener.

Returned: when state is present

Sample: ""

load_balancer_arn

string

The Amazon Resource Name (ARN) of the load balancer.

Returned: when state is present

Sample: ""

port

integer

The port on which the load balancer is listening.

Returned: when state is present

Sample: 80

protocol

string

The protocol for connections from clients to the load balancer.

Returned: when state is present

Sample: "HTTPS"

ssl_policy

string

The security policy that defines which ciphers and protocols are supported.

Returned: when state is present

Sample: ""

load_balancer_arn

string

The Amazon Resource Name (ARN) of the load balancer.

Returned: when state is present

Sample: "arn:aws:elasticloadbalancing:ap-southeast-2:123456789012:loadbalancer/app/my-alb/001122334455"

load_balancer_name

string

The name of the load balancer.

Returned: when state is present

Sample: "my-alb"

routing_http2_enabled

boolean

Indicates whether HTTP/2 is enabled.

Returned: when state is present

Sample: true

routing_http_desync_mitigation_mode

string

Determines how the load balancer handles requests that might pose a security risk to an application.

Returned: when state is present

Sample: "defensive"

routing_http_drop_invalid_header_fields_enabled

boolean

Indicates whether HTTP headers with invalid header fields are removed by the load balancer (true) or routed to targets (false).

Returned: when state is present

Sample: false

routing_http_x_amzn_tls_version_and_cipher_suite_enabled

boolean

Indicates whether the two headers are added to the client request before sending it to the target.

Returned: when state is present

Sample: false

routing_http_xff_client_port_enabled

boolean

Indicates whether the X-Forwarded-For header should preserve the source port that the client used to connect to the load balancer.

Returned: when state is present

Sample: false

scheme

string

Internet-facing or internal load balancer.

Returned: when state is present

Sample: "internal"

security_groups

list / elements=string

The IDs of the security groups for the load balancer.

Returned: when state is present

Sample: ["sg-0011223344"]

state

dictionary

The state of the load balancer.

Returned: when state is present

Sample: {"code": "active"}

tags

dictionary

The tags attached to the load balancer.

Returned: when state is present

Sample: {"Tag": "Example"}

type

string

The type of load balancer.

Returned: when state is present

Sample: "application"

vpc_id

string

The ID of the VPC for the load balancer.

Returned: when state is present

Sample: "vpc-0011223344"

waf_fail_open_enabled

boolean

Indicates whether to allow a AWS WAF-enabled load balancer to route requests to targets if it is unable to forward the request to AWS WAF.

Returned: when state is present

Sample: false

Authors

  • Rob White (@wimnat)