cisco.aci.aci_domain module – Manage physical, virtual, bridged, routed or FC domain profiles (phys:DomP, vmm:DomP, l2ext:DomP, l3ext:DomP, fc:DomP)

Note

This module is part of the cisco.aci collection (version 2.8.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_domain.

Synopsis

  • Manage physical, virtual, bridged, routed or FC domain profiles on Cisco ACI fabrics.

Parameters

Parameter

Comments

access_mode

string

Access mode for vmm domains

This parameter cannot be changed after a domain is created

Choices:

  • "read-only"

  • "read-write"

add_infra_pg

aliases: infra_pg

boolean

Configure port groups for infra VLAN (e.g. Virtual APIC).

Choices:

  • false

  • true

annotation

string

User-defined string for annotating an object.

If the value is not specified in the task, the value of environment variable ACI_ANNOTATION will be used instead.

If the value is not specified in the task and environment variable ACI_ANNOTATION then the default value will be used.

Default: "orchestrator:ansible"

certificate_name

aliases: cert_name

string

The X.509 certificate name attached to the APIC AAA user used for signature-based authentication.

If a private_key filename was provided, this defaults to the private_key basename, without extension.

If PEM-formatted content was provided for private_key, this defaults to the username value.

If the value is not specified in the task, the value of environment variable ACI_CERTIFICATE_NAME will be used instead.

domain

aliases: domain_name, domain_profile, name

string

Name of the physical, virtual, bridged routed or FC domain profile.

domain_type

aliases: type

string / required

The type of domain profile.

fc: The FC domain profile is a policy pertaining to single FC Management domain

l2dom: The external bridged domain profile is a policy for managing L2 bridged infrastructure bridged outside the fabric.

l3dom: The external routed domain profile is a policy for managing L3 routed infrastructure outside the fabric.

phys: The physical domain profile stores the physical resources and encap resources that should be used for EPGs associated with this domain.

vmm: The VMM domain profile is a policy for grouping VM controllers with similar networking policy requirements.

Choices:

  • "fc"

  • "l2dom"

  • "l3dom"

  • "phys"

  • "vmm"

dscp

aliases: target

string

The target Differentiated Service (DSCP) value.

The APIC defaults to unspecified when unset during creation.

Choices:

  • "AF11"

  • "AF12"

  • "AF13"

  • "AF21"

  • "AF22"

  • "AF23"

  • "AF31"

  • "AF32"

  • "AF33"

  • "AF41"

  • "AF42"

  • "AF43"

  • "CS0"

  • "CS1"

  • "CS2"

  • "CS3"

  • "CS4"

  • "CS5"

  • "CS6"

  • "CS7"

  • "EF"

  • "VA"

  • "unspecified"

enable_vm_folder

boolean

Enable VM folder data retrieval

Choices:

  • false

  • true

encap_mode

string

The layer 2 encapsulation protocol to use with the virtual switch.

Choices:

  • "unknown"

  • "vlan"

  • "vxlan"

host

aliases: hostname

string

IP Address or hostname of APIC resolvable by Ansible control host.

If the value is not specified in the task, the value of environment variable ACI_HOST will be used instead.

multicast_address

string

The multicast IP address to use for the virtual switch.

name_alias

string

The alias for the current object. This relates to the nameAlias field in ACI.

output_level

string

Influence the output of this ACI module.

normal means the standard output, incl. current dict

info adds informational output, incl. previous, proposed and sent dicts

debug adds debugging output, incl. filter_string, method, response, status and url information

If the value is not specified in the task, the value of environment variable ACI_OUTPUT_LEVEL will be used instead.

Choices:

  • "debug"

  • "info"

  • "normal" ← (default)

output_path

string

Path to a file that will be used to dump the ACI JSON configuration objects generated by the module.

If the value is not specified in the task, the value of environment variable ACI_OUTPUT_PATH will be used instead.

owner_key

string

User-defined string for the ownerKey attribute of an ACI object.

This attribute represents a key for enabling clients to own their data for entity correlation.

If the value is not specified in the task, the value of environment variable ACI_OWNER_KEY will be used instead.

owner_tag

string

User-defined string for the ownerTag attribute of an ACI object.

This attribute represents a tag for enabling clients to add their own data.

For example, to indicate who created this object.

If the value is not specified in the task, the value of environment variable ACI_OWNER_TAG will be used instead.

password

string

The password to use for authentication.

This option is mutual exclusive with private_key. If private_key is provided too, it will be used instead.

If the value is not specified in the task, the value of environment variables ACI_PASSWORD or ANSIBLE_NET_PASSWORD will be used instead.

port

integer

Port number to be used for REST connection.

The default value depends on parameter use_ssl.

If the value is not specified in the task, the value of environment variable ACI_PORT will be used instead.

private_key

aliases: cert_key

string

Either a PEM-formatted private key file or the private key content used for signature-based authentication.

This value also influences the default certificate_name that is used.

This option is mutual exclusive with password. If password is provided too, it will be ignored.

If the value is not specified in the task, the value of environment variable ACI_PRIVATE_KEY or ANSIBLE_NET_SSH_KEYFILE will be used instead.

state

string

Use present or absent for adding or removing.

Use query for listing an object or multiple objects.

Choices:

  • "absent"

  • "present" ← (default)

  • "query"

tag_collection

boolean

Enables Cisco APIC to collect VMs that have been assigned tags in VMware vCenter for microsegmentation.

Choices:

  • false

  • true

timeout

integer

The socket level timeout in seconds.

If the value is not specified in the task, the value of environment variable ACI_TIMEOUT will be used instead.

The default value is 30.

use_proxy

boolean

If false, it will not use a proxy, even if one is defined in an environment variable on the target hosts.

If the value is not specified in the task, the value of environment variable ACI_USE_PROXY will be used instead.

The default value is true.

Choices:

  • false

  • true

use_ssl

boolean

If false, an HTTP connection will be used instead of the default HTTPS connection.

If the value is not specified in the task, the value of environment variable ACI_USE_SSL will be used instead.

The default value is true when the connection is local.

Choices:

  • false

  • true

username

aliases: user

string

The username to use for authentication.

If the value is not specified in the task, the value of environment variables ACI_USERNAME or ANSIBLE_NET_USERNAME will be used instead.

The default value is admin.

validate_certs

boolean

If false, SSL certificates will not be validated.

This should only set to false when used on personally controlled sites using self-signed certificates.

If the value is not specified in the task, the value of environment variable ACI_VALIDATE_CERTS will be used instead.

The default value is true.

Choices:

  • false

  • true

vm_provider

string

The VM platform for VMM Domains.

Support for Kubernetes was added in ACI v3.0.

Support for CloudFoundry, OpenShift and Red Hat was added in ACI v3.1.

Choices:

  • "cloudfoundry"

  • "kubernetes"

  • "microsoft"

  • "openshift"

  • "openstack"

  • "redhat"

  • "vmware"

vswitch

string

The virtual switch to use for vmm domains.

The APIC defaults to default when unset during creation.

Choices:

  • "avs"

  • "default"

  • "dvs"

  • "unknown"

See Also

See also

cisco.aci.aci_aep_to_domain

Bind AEPs to Physical or Virtual Domains (infra:RsDomP).

cisco.aci.aci_domain_to_encap_pool

Bind Domain to Encap Pools (infra:RsVlanNs).

cisco.aci.aci_domain_to_vlan_pool

Bind Domain to VLAN Pools (infra:RsVlanNs).

APIC Management Information Model reference

More information about the internal APIC classes phys:DomP, vmm:DomP, l2ext:DomP, l3ext:DomP and fc:DomP

Cisco ACI Guide

Detailed information on how to manage your ACI infrastructure using Ansible.

Developing Cisco ACI modules

Detailed guide on how to write your own Cisco ACI modules to contribute.

Examples

- name: Add a new physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: present

- name: Remove a physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: absent

- name: Add a new VMM domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: hyperv_dom
    domain_type: vmm
    vm_provider: microsoft
    state: present
  delegate_to: localhost

- name: Remove a VMM domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: hyperv_dom
    domain_type: vmm
    vm_provider: microsoft
    state: absent
  delegate_to: localhost

- name: Query a specific physical domain
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain: phys_dom
    domain_type: phys
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all domains
  cisco.aci.aci_domain:
    host: apic
    username: admin
    password: SomeSecretPassword
    domain_type: phys
    state: query
  delegate_to: localhost
  register: query_result

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

current

list / elements=string

The existing configuration from the APIC after the module has finished

Returned: success

Sample: [{"fvTenant": {"attributes": {"descr": "Production environment", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]

error

dictionary

The error information as returned from the APIC

Returned: failure

Sample: {"code": "122", "text": "unknown managed object class foo"}

filter_string

string

The filter string used for the request

Returned: failure or debug

Sample: "?rsp-prop-include=config-only"

method

string

The HTTP method used for the request to the APIC

Returned: failure or debug

Sample: "POST"

previous

list / elements=string

The original configuration from the APIC before the module has started

Returned: info

Sample: [{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]

proposed

dictionary

The assembled configuration from the user-provided parameters

Returned: info

Sample: {"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}

raw

string

The raw output returned by the APIC REST API (xml or json)

Returned: parse error

Sample: "<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class foo\"/></imdata>"

response

string

The HTTP response from the APIC

Returned: failure or debug

Sample: "OK (30 bytes)"

sent

list / elements=string

The actual/minimal configuration pushed to the APIC

Returned: info

Sample: {"fvTenant": {"attributes": {"descr": "Production environment"}}}

status

integer

The HTTP status from the APIC

Returned: failure or debug

Sample: 200

url

string

The HTTP url used for the request to the APIC

Returned: failure or debug

Sample: "https://10.11.12.13/api/mo/uni/tn-production.json"

Authors

  • Dag Wieers (@dagwieers)