You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.aci.aci_system_endpoint_controls module – Manage System Endpoint Controls (ep:IpAgingP, ep:ControlP, and ep:LoopProtectP)

Note

This module is part of the cisco.aci collection (version 2.8.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.aci.

To use it in a playbook, specify: cisco.aci.aci_system_endpoint_controls.

Synopsis 

Manage System Endpoint Controls on Cisco ACI fabrics.

Parameters 

Parameter	Comments
annotation string	User-defined string for annotating an object. If the value is not specified in the task, the value of environment variable `ACI_ANNOTATION` will be used instead. If the value is not specified in the task and environment variable `ACI_ANNOTATION` then the default value will be used. Default: `"orchestrator:ansible"`
certificate_name aliases: cert_name string	The X.509 certificate name attached to the APIC AAA user used for signature-based authentication. If a `private_key` filename was provided, this defaults to the `private_key` basename, without extension. If PEM-formatted content was provided for `private_key`, this defaults to the `username` value. If the value is not specified in the task, the value of environment variable `ACI_CERTIFICATE_NAME` will be used instead.
ep_loop_protection dictionary	Configuration container for EP Loop Protection.
action list / elements=string	The action(s) to take when a loop is detected. Choices: `"bd"` `"port"`
admin_state boolean	Whether to enable EP Loop Protection on the fabric. Choices: `false` `true`
interval integer	The loop protection detection interval in seconds.
multiplication_factor integer	The loop protection detection multiplication factor.
host aliases: hostname string	IP Address or hostname of APIC resolvable by Ansible control host. If the value is not specified in the task, the value of environment variable `ACI_HOST` will be used instead.
ip_aging dictionary	Configuration container for IP Aging.
admin_state boolean	Whether to enable IP Aging Controls on the fabric. Choices: `false` `true`
output_level string	Influence the output of this ACI module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_LEVEL` will be used instead. Choices: `"debug"` `"info"` `"normal"` ← (default)
output_path string	Path to a file that will be used to dump the ACI JSON configuration objects generated by the module. If the value is not specified in the task, the value of environment variable `ACI_OUTPUT_PATH` will be used instead.
owner_key string	User-defined string for the ownerKey attribute of an ACI object. This attribute represents a key for enabling clients to own their data for entity correlation. If the value is not specified in the task, the value of environment variable `ACI_OWNER_KEY` will be used instead.
owner_tag string	User-defined string for the ownerTag attribute of an ACI object. This attribute represents a tag for enabling clients to add their own data. For example, to indicate who created this object. If the value is not specified in the task, the value of environment variable `ACI_OWNER_TAG` will be used instead.
password string	The password to use for authentication. This option is mutual exclusive with `private_key`. If `private_key` is provided too, it will be used instead. If the value is not specified in the task, the value of environment variables `ACI_PASSWORD` or `ANSIBLE_NET_PASSWORD` will be used instead.
port integer	Port number to be used for REST connection. The default value depends on parameter `use_ssl`. If the value is not specified in the task, the value of environment variable `ACI_PORT` will be used instead.
private_key aliases: cert_key string	Either a PEM-formatted private key file or the private key content used for signature-based authentication. This value also influences the default `certificate_name` that is used. This option is mutual exclusive with `password`. If `password` is provided too, it will be ignored. If the value is not specified in the task, the value of environment variable `ACI_PRIVATE_KEY` or `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
roque_ep_control dictionary	Configuration container for Rogue EP Control.
admin_state boolean	Whether to enable Rogue EP Control on the fabric. Choices: `false` `true`
hold_interval integer	The rogue endpoint hold interval in seconds.
interval integer	The rogue endpoint detection interval in seconds.
multiplication_factor integer	The rogue endpoint detection multiplication factor.
state string	Use `present` for updating configuration. Use `query` for showing current configuration. Choices: `"present"` ← (default) `"query"`
timeout integer	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable `ACI_TIMEOUT` will be used instead. The default value is 30.
use_proxy boolean	If `false`, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable `ACI_USE_PROXY` will be used instead. The default value is true. Choices: `false` `true`
use_ssl boolean	If `false`, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable `ACI_USE_SSL` will be used instead. The default value is true when the connection is local. Choices: `false` `true`
username aliases: user string	The username to use for authentication. If the value is not specified in the task, the value of environment variables `ACI_USERNAME` or `ANSIBLE_NET_USERNAME` will be used instead. The default value is admin.
validate_certs boolean	If `false`, SSL certificates will not be validated. This should only set to `false` when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable `ACI_VALIDATE_CERTS` will be used instead. The default value is true. Choices: `false` `true`

Examples 

- name: Set system endpoint controls settings
  cisco.aci.aci_system_endpoint_controls:
    host: apic
    username: admin
    password: SomeSecretPassword
    admin_state: true
    ip_aging:
      admin_state: true
    roque_ep_control:
      admin_state: true
      interval: 50
      multiplication_factor: 10
      hold_interval: 2000
    ep_loop_protection:
      admin_state: true
      interval: 70
      multiplication_factor: 15
      action: [ bd, port ]
  delegate_to: localhost

- name: Query system endpoint controls settings
  cisco.aci.aci_system_endpoint_controls:
    host: apic
    username: admin
    password: SomeSecretPassword
    state: query
  delegate_to: localhost
  register: query_result

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
current list / elements=string	The existing configuration from the APIC after the module has finished Returned: success Sample: `[{"fvTenant": {"attributes": {"descr": "Production environment", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]`
error dictionary	The error information as returned from the APIC Returned: failure Sample: `{"code": "122", "text": "unknown managed object class foo"}`
filter_string string	The filter string used for the request Returned: failure or debug Sample: `"?rsp-prop-include=config-only"`
method string	The HTTP method used for the request to the APIC Returned: failure or debug Sample: `"POST"`
previous list / elements=string	The original configuration from the APIC before the module has started Returned: info Sample: `[{"fvTenant": {"attributes": {"descr": "Production", "dn": "uni/tn-production", "name": "production", "nameAlias": "", "ownerKey": "", "ownerTag": ""}}}]`
proposed dictionary	The assembled configuration from the user-provided parameters Returned: info Sample: `{"fvTenant": {"attributes": {"descr": "Production environment", "name": "production"}}}`
raw string	The raw output returned by the APIC REST API (xml or json) Returned: parse error Sample: `"<?xml version=\"1.0\" encoding=\"UTF-8\"?><imdata totalCount=\"1\"><error code=\"122\" text=\"unknown managed object class foo\"/></imdata>"`
response string	The HTTP response from the APIC Returned: failure or debug Sample: `"OK (30 bytes)"`
sent list / elements=string	The actual/minimal configuration pushed to the APIC Returned: info Sample: `{"fvTenant": {"attributes": {"descr": "Production environment"}}}`
status integer	The HTTP status from the APIC Returned: failure or debug Sample: `200`
url string	The HTTP url used for the request to the APIC Returned: failure or debug Sample: `"https://10.11.12.13/api/mo/uni/tn-production.json"`

Authors

Tim Cragg (@timcragg)
Akini Ross (@akinross)

cisco.aci.aci_system_endpoint_controls module – Manage System Endpoint Controls (ep:IpAgingP, ep:ControlP, and ep:LoopProtectP)

Synopsis 

Parameters 

See Also 

Examples 

Return Values 

Authors

Collection links

cisco.aci.aci_system_endpoint_controls module – Manage System Endpoint Controls (ep:IpAgingP, ep:ControlP, and ep:LoopProtectP)

Synopsis

Parameters

See Also

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

See Also 

Examples 

Return Values 