cisco.ios.ios_acls module – Resource module to configure ACLs.

Note

This module is part of the cisco.ios collection (version 4.6.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_acls.

New in cisco.ios 1.0.0

Synopsis

  • This module configures and manages the named or numbered ACLs on IOS platforms.

Note

This module has a corresponding action plugin.

Aliases: acls

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of ACL configuration options.

acls

list / elements=dictionary

A list of Access Control Lists (ACL) attributes.

aces

list / elements=dictionary

The entries within the ACL.

destination

dictionary

Specify the packet destination.

address

string

Host address to match, or any single host address.

any

boolean

Match any source address.

Choices:

  • false

  • true

host

string

A single destination host

object_group

string

Destination network object group

port_protocol

dictionary

Specify the destination port along with protocol.

Note, Valid with TCP/UDP protocol_options

eq

string

Match only packets on a given port number.

gt

string

Match only packets with a greater port number.

lt

string

Match only packets with a lower port number.

neq

string

Match only packets not on a given port number.

range

dictionary

Port group.

end

integer

Specify the end of the port range.

start

integer

Specify the start of the port range.

wildcard_bits

string

Destination wildcard bits, valid with IPV4 address.

dscp

string

Match packets with given dscp value.

enable_fragments

boolean

Enable non-initial fragments.

Choices:

  • false

  • true

evaluate

string

Evaluate an access list

fragments

string

Check non-initial fragments.

This option is DEPRECATED and is replaced with enable_fragments which accepts bool as input this attribute will be removed after 2024-01-01.

grant

string

Specify the action.

Choices:

  • "permit"

  • "deny"

log

dictionary

Log matches against this entry.

set

boolean

Enable Log matches against this entry

Choices:

  • false

  • true

string

User defined cookie (max of 64 char)

log_input

dictionary

Log matches against this entry, including input interface.

set

boolean

Enable Log matches against this entry, including input interface.

Choices:

  • false

  • true

string

User defined cookie (max of 64 char)

option

dictionary

Match packets with given IP Options value.

Valid only for named acls.

add_ext

boolean

Match packets with Address Extension Option (147).

Choices:

  • false

  • true

any_options

boolean

Match packets with ANY Option.

Choices:

  • false

  • true

com_security

boolean

Match packets with Commercial Security Option (134).

Choices:

  • false

  • true

dps

boolean

Match packets with Dynamic Packet State Option (151).

Choices:

  • false

  • true

encode

boolean

Match packets with Encode Option (15).

Choices:

  • false

  • true

eool

boolean

Match packets with End of Options (0).

Choices:

  • false

  • true

ext_ip

boolean

Match packets with Extended IP Option (145).

Choices:

  • false

  • true

ext_security

boolean

Match packets with Extended Security Option (133).

Choices:

  • false

  • true

finn

boolean

Match packets with Experimental Flow Control Option (205).

Choices:

  • false

  • true

imitd

boolean

Match packets with IMI Traffic Desriptor Option (144).

Choices:

  • false

  • true

lsr

boolean

Match packets with Loose Source Route Option (131).

Choices:

  • false

  • true

mtup

boolean

Match packets with MTU Probe Option (11).

Choices:

  • false

  • true

mtur

boolean

Match packets with MTU Reply Option (12).

Choices:

  • false

  • true

no_op

boolean

Match packets with No Operation Option (1).

Choices:

  • false

  • true

nsapa

boolean

Match packets with NSAP Addresses Option (150).

Choices:

  • false

  • true

record_route

boolean

Match packets with Record Route Option (7).

Choices:

  • false

  • true

router_alert

boolean

Match packets with Router Alert Option (148).

Choices:

  • false

  • true

sdb

boolean

Match packets with Selective Directed Broadcast Option (149).

Choices:

  • false

  • true

security

boolean

Match packets with Basic Security Option (130).

Choices:

  • false

  • true

ssr

boolean

Match packets with Strict Source Routing Option (137).

Choices:

  • false

  • true

stream_id

boolean

Match packets with Stream ID Option (136).

Choices:

  • false

  • true

timestamp

boolean

Match packets with Time Stamp Option (68).

Choices:

  • false

  • true

traceroute

boolean

Match packets with Trace Route Option (82).

Choices:

  • false

  • true

ump

boolean

Match packets with Upstream Multicast Packet Option (152).

Choices:

  • false

  • true

visa

boolean

Match packets with Experimental Access Control Option (142).

Choices:

  • false

  • true

zsu

boolean

Match packets with Experimental Measurement Option (10).

Choices:

  • false

  • true

precedence

string

Match packets with given precedence value.

protocol

string

Specify the protocol to match.

Refer to vendor documentation for valid values.

protocol_options

dictionary

protocol type.

ahp

boolean

Authentication Header Protocol.

Choices:

  • false

  • true

eigrp

boolean

Cisco’s EIGRP routing protocol.

Choices:

  • false

  • true

esp

boolean

Encapsulation Security Payload.

Choices:

  • false

  • true

gre

boolean

Cisco’s GRE tunneling.

Choices:

  • false

  • true

hbh

boolean

Hop by Hop options header. Valid for IPV6

Choices:

  • false

  • true

icmp

dictionary

Internet Control Message Protocol.

administratively_prohibited

boolean

Administratively prohibited

Choices:

  • false

  • true

alternate_address

boolean

Alternate address

Choices:

  • false

  • true

conversion_error

boolean

Datagram conversion

Choices:

  • false

  • true

dod_host_prohibited

boolean

Host prohibited

Choices:

  • false

  • true

dod_net_prohibited

boolean

Net prohibited

Choices:

  • false

  • true

echo

boolean

Echo (ping)

Choices:

  • false

  • true

echo_reply

boolean

Echo reply

Choices:

  • false

  • true

general_parameter_problem

boolean

Parameter problem

Choices:

  • false

  • true

host_isolated

boolean

Host isolated

Choices:

  • false

  • true

host_precedence_unreachable

boolean

Host unreachable for precedence

Choices:

  • false

  • true

host_redirect

boolean

Host redirect

Choices:

  • false

  • true

host_tos_redirect

boolean

Host redirect for TOS

Choices:

  • false

  • true

host_tos_unreachable

boolean

Host unreachable for TOS

Choices:

  • false

  • true

host_unknown

boolean

Host unknown

Choices:

  • false

  • true

host_unreachable

boolean

Host unreachable

Choices:

  • false

  • true

information_reply

boolean

Information replies

Choices:

  • false

  • true

information_request

boolean

Information requests

Choices:

  • false

  • true

mask_reply

boolean

Mask replies

Choices:

  • false

  • true

mask_request

boolean

mask_request

Choices:

  • false

  • true

mobile_redirect

boolean

Mobile host redirect

Choices:

  • false

  • true

net_redirect

boolean

Network redirect

Choices:

  • false

  • true

net_tos_redirect

boolean

Net redirect for TOS

Choices:

  • false

  • true

net_tos_unreachable

boolean

Network unreachable for TOS

Choices:

  • false

  • true

net_unreachable

boolean

Net unreachable

Choices:

  • false

  • true

network_unknown

boolean

Network unknown

Choices:

  • false

  • true

no_room_for_option

boolean

Parameter required but no room

Choices:

  • false

  • true

option_missing

boolean

Parameter required but not present

Choices:

  • false

  • true

packet_too_big

boolean

Fragmentation needed and DF set

Choices:

  • false

  • true

parameter_problem

boolean

All parameter problems

Choices:

  • false

  • true

port_unreachable

boolean

Port unreachable

Choices:

  • false

  • true

precedence_unreachable

boolean

Precedence cutoff

Choices:

  • false

  • true

protocol_unreachable

boolean

Protocol unreachable

Choices:

  • false

  • true

reassembly_timeout

boolean

Reassembly timeout

Choices:

  • false

  • true

redirect

boolean

All redirects

Choices:

  • false

  • true

router_advertisement

boolean

Router discovery advertisements

Choices:

  • false

  • true

router_solicitation

boolean

Router discovery solicitations

Choices:

  • false

  • true

source_quench

boolean

Source quenches

Choices:

  • false

  • true

source_route_failed

boolean

Source route failed

Choices:

  • false

  • true

time_exceeded

boolean

All time exceededs

Choices:

  • false

  • true

timestamp_reply

boolean

Timestamp replies

Choices:

  • false

  • true

timestamp_request

boolean

Timestamp requests

Choices:

  • false

  • true

traceroute

boolean

Traceroute

Choices:

  • false

  • true

ttl_exceeded

boolean

TTL exceeded

Choices:

  • false

  • true

unreachable

boolean

All unreachables

Choices:

  • false

  • true

igmp

dictionary

Internet Gateway Message Protocol.

dvmrp

boolean

Distance Vector Multicast Routing Protocol(2)

Choices:

  • false

  • true

host_query

boolean

IGMP Membership Query(0)

Choices:

  • false

  • true

mtrace_resp

boolean

Multicast Traceroute Response(7)

Choices:

  • false

  • true

mtrace_route

boolean

Multicast Traceroute(8)

Choices:

  • false

  • true

pim

boolean

Protocol Independent Multicast(3)

Choices:

  • false

  • true

trace

boolean

Multicast trace(4)

Choices:

  • false

  • true

v1host_report

boolean

IGMPv1 Membership Report(1)

Choices:

  • false

  • true

v2host_report

boolean

IGMPv2 Membership Report(5)

Choices:

  • false

  • true

v2leave_group

boolean

IGMPv2 Leave Group(6)

Choices:

  • false

  • true

v3host_report

boolean

IGMPv3 Membership Report(9)

Choices:

  • false

  • true

ip

boolean

Any Internet Protocol.

Choices:

  • false

  • true

ipinip

boolean

IP in IP tunneling.

Choices:

  • false

  • true

ipv6

boolean

Any IPv6.

Choices:

  • false

  • true

nos

boolean

KA9Q NOS compatible IP over IP tunneling.

Choices:

  • false

  • true

ospf

boolean

OSPF routing protocol.

Choices:

  • false

  • true

pcp

boolean

Payload Compression Protocol.

Choices:

  • false

  • true

pim

boolean

Protocol Independent Multicast.

Choices:

  • false

  • true

protocol_number

integer

An IP protocol number

sctp

boolean

Stream Control Transmission Protocol.

Choices:

  • false

  • true

tcp

dictionary

Match TCP packet flags

ack

boolean

Match on the ACK bit

Choices:

  • false

  • true

established

boolean

Match established connections

Choices:

  • false

  • true

fin

boolean

Match on the FIN bit

Choices:

  • false

  • true

psh

boolean

Match on the PSH bit

Choices:

  • false

  • true

rst

boolean

Match on the RST bit

Choices:

  • false

  • true

syn

boolean

Match on the SYN bit

Choices:

  • false

  • true

urg

boolean

Match on the URG bit

Choices:

  • false

  • true

udp

boolean

User Datagram Protocol.

Choices:

  • false

  • true

remarks

list / elements=string

The remarks/description of the ACL.

sequence

integer

Sequence Number for the Access Control Entry(ACE).

Refer to vendor documentation for valid values.

source

dictionary

Specify the packet source.

address

string

Source network address.

any

boolean

Match any source address.

Choices:

  • false

  • true

host

string

A single source host

object_group

string

Source network object group

port_protocol

dictionary

Specify the source port along with protocol.

Note, Valid with TCP/UDP protocol_options

eq

string

Match only packets on a given port number.

gt

string

Match only packets with a greater port number.

lt

string

Match only packets with a lower port number.

neq

string

Match only packets not on a given port number.

range

dictionary

Port group.

end

integer

Specify the end of the port range.

start

integer

Specify the start of the port range.

wildcard_bits

string

Source wildcard bits, valid with IPV4 address.

time_range

string

Specify a time-range.

tos

dictionary

Match packets with given TOS value.

Note, DSCP and TOS are mutually exclusive

max_reliability

boolean

Match packets with max reliable TOS (2).

Choices:

  • false

  • true

max_throughput

boolean

Match packets with max throughput TOS (4).

Choices:

  • false

  • true

min_delay

boolean

Match packets with min delay TOS (8).

Choices:

  • false

  • true

min_monetary_cost

boolean

Match packets with min monetary cost TOS (1).

Choices:

  • false

  • true

normal

boolean

Match packets with normal TOS (0).

Choices:

  • false

  • true

service_value

integer

Type of service value

ttl

dictionary

Match packets with given TTL value.

eq

integer

Match only packets on a given TTL number.

gt

integer

Match only packets with a greater TTL number.

lt

integer

Match only packets with a lower TTL number.

neq

integer

Match only packets not on a given TTL number.

range

dictionary

Match only packets in the range of TTLs.

end

integer

Specify the end of the port range.

start

integer

Specify the start of the port range.

acl_type

string

ACL type

Note, it’s mandatory and required for Named ACL, but for Numbered ACL it’s not mandatory.

Choices:

  • "extended"

  • "standard"

name

string / required

The name or the number of the ACL.

afi

string / required

The Address Family Indicator (AFI) for the Access Control Lists (ACL).

Choices:

  • "ipv4"

  • "ipv6"

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the IOS device by executing the command sh access-list.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in

The state merged is the default state which merges the want and have config, but for ACL module as the IOS platform doesn’t allow update of ACE over an pre-existing ACE sequence in ACL, same way ACLs resource module will error out for respective scenario and only addition of new ACE over new sequence will be allowed with merge state.

The states rendered, gathered and parsed does not perform any change on the device.

The state rendered will transform the configuration in config option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required.

The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result.

The state parsed reads the configuration from running_config option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of running_config option should be the same format as the output of commands show access-list and show running-config | include ip(v6* access-list|remark) executed on device. Config data from both the commands should be kept together one after another for the parsers to pick the commands correctly. For state parsed active connection to remote host is not required.

The state overridden, modify/add the ACLs defined, deleted all other ACLs.

The state replaced, modify/add only the ACEs of the ACLs defined only. It does not perform any other change on the device.

The state deleted, deletes only the specified ACLs, or all if not specified.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "rendered"

  • "parsed"

Notes

Note

Examples

# Using merged

# Before state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 100
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10

- name: Merge provided configuration with device configuration
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: 100
            aces:
              - sequence: 10
                protocol_options:
                  icmp:
                    traceroute: true
    state: merged

# After state:
# ------------
#
# Play Execution fails, with error:
# Cannot update existing sequence 10 of ACLs 100 with state merged.
# Please use state replaced or overridden.

# Before state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10

- name: Merge provided configuration with device configuration
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: std_acl
            acl_type: standard
            aces:
              - grant: deny
                source:
                  address: 192.168.1.200
              - grant: deny
                source:
                  address: 192.168.2.0
                  wildcard_bits: 0.0.0.255
          - name: 110
            aces:
              - sequence: 10
                protocol_options:
                  icmp:
                    traceroute: true
              - grant: deny
                protocol_options:
                  tcp:
                    ack: true
                source:
                  host: 198.51.100.0
                destination:
                  host: 198.51.110.0
                  port_protocol:
                    eq: telnet
          - name: test
            acl_type: extended
            aces:
              - grant: deny
                protocol_options:
                  tcp:
                    fin: true
                source:
                  address: 192.0.2.0
                  wildcard_bits: 0.0.0.255
                destination:
                  address: 192.0.3.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: www
                option:
                  traceroute: true
                ttl:
                  eq: 10
          - name: 123
            aces:
              - remarks:
                  - "remarks for extended ACL 1"
                  - "check ACL"
              - grant: deny
                protocol_options:
                  tcp:
                    ack: true
                source:
                  address: 198.51.100.0
                  wildcard_bits: 0.0.0.255
                destination:
                  address: 198.51.101.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                tos:
                  service_value: 12
              - grant: deny
                protocol_options:
                  tcp:
                    ack: true
                source:
                  address: 192.0.3.0
                  wildcard_bits: 0.0.0.255
                destination:
                  address: 192.0.4.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: www
                dscp: ef
                ttl:
                  lt: 20
      - afi: ipv6
        acls:
          - name: R1_TRAFFIC
            aces:
              - grant: deny
                protocol_options:
                  tcp:
                    ack: true
                source:
                  any: true
                  port_protocol:
                    eq: www
                destination:
                  any: true
                  port_protocol:
                    eq: telnet
                dscp: af11
    state: merged

# Commands fired:
# ---------------
#
# - ip access-list standard std_acl
# - deny 192.168.1.200
# - deny 192.168.2.0 0.0.0.255
# - ip access-list extended 110
# - 10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
# - deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# - ip access-list extended test
# - deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# - ip access-list extended 123
# - deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
# - deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# - remark remarks for extended ACL 1
# - remark check ACL
# - ipv6 access-list R1_TRAFFIC
# - deny tcp any eq www any eq telnet ack dscp af11

# After state:
# ------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 100
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

# Using replaced

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: Replaces device configuration of listed acls with provided configuration
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: 110
            aces:
              - grant: deny
                protocol_options:
                  tcp:
                    syn: true
                source:
                  address: 192.0.2.0
                  wildcard_bits: 0.0.0.255
                destination:
                  address: 192.0.3.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: www
                dscp: ef
                ttl:
                  eq: 10
          - name: 150
            aces:
              - grant: deny
                sequence: 20
                protocol_options:
                  tcp:
                    syn: true
                source:
                  address: 198.51.100.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                destination:
                  address: 198.51.110.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                dscp: ef
                ttl:
                  eq: 10
    state: replaced

# Commands fired:
# ---------------
#
# - no ip access-list extended 110
# - ip access-list extended 110
# - deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10
# - ip access-list extended 150
# - 20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10

# After state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list 150
#    20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

# Using overridden

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: Override device configuration of all acls with provided configuration
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: 110
            aces:
              - grant: deny
                sequence: 20
                protocol_options:
                  tcp:
                    ack: true
                source:
                  address: 198.51.100.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                destination:
                  address: 198.51.110.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: www
                dscp: ef
                ttl:
                  eq: 10
          - name: 150
            aces:
              - grant: deny
                sequence: 10
                protocol_options:
                  tcp:
                    syn: true
                source:
                  address: 198.51.100.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                destination:
                  address: 198.51.110.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                dscp: ef
                ttl:
                  eq: 10
    state: overridden

# Commands fired:
# ---------------
#
# - no ip access-list standard std_acl
# - no ip access-list extended 110
# - no ip access-list extended 123
# - no ip access-list extended 150
# - no ip access-list extended test
# - no ipv6 access-list R1_TRAFFIC
# - ip access-list extended 150
# - 10 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10
# - ip access-list extended 110
# - 20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq www ack dscp ef ttl eq 10

# After state:
# -------------
#
# vios#sh access-lists
# Extended IP access list 110
#    20 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq www ack dscp ef ttl eq 10
# Extended IP access list 150
#    10 deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10

# Using Deleted

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: "Delete ACLs (Note: This won't delete the all configured ACLs)"
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: test
            acl_type: extended
          - name: 110
      - afi: ipv6
        acls:
          - name: R1_TRAFFIC
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ipv6 access-list R1_TRAFFIC

# After state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: "Delete ACLs based on AFI (Note: This won't delete the all configured ACLs)"
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list standard std_acl
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ip access-list extended 123

# After state:
# -------------
#
# vios#sh access-lists
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

# Using Deleted without any config passed
#"(NOTE: This will delete all of configured ACLs)"

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name:
    "Delete ALL of configured ACLs (Note: This WILL delete the all configured
    ACLs)"
  cisco.ios.ios_acls:
    state: deleted

# Commands fired:
# ---------------
#
# - no ip access-list extended test
# - no ip access-list extended 110
# - no ip access-list extended 123
# - no ip access-list extended test
# - no ipv6 access-list R1_TRAFFIC

# After state:
# -------------
#
# vios#sh access-lists

# Using Gathered

# Before state:
# -------------
#
# vios#sh access-lists
# Standard IP access list std_acl
#    10 deny   192.168.1.200
#    20 deny   192.168.2.0, wildcard bits 0.0.0.255
# Extended IP access list 110
#    10 deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 traceroute dscp ef ttl eq 10
#    20 deny tcp host 198.51.100.0 host 198.51.110.0 eq telnet ack
# Extended IP access list 123
#    10 deny tcp 198.51.100.0 0.0.0.255 198.51.101.0 0.0.0.255 eq telnet ack tos 12
#    20 deny tcp 192.0.3.0 0.0.0.255 192.0.4.0 0.0.0.255 eq www ack dscp ef ttl lt 20
# Extended IP access list test
#    10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www fin option traceroute ttl eq 10
# IPv6 access list R1_TRAFFIC
#    deny tcp any eq www any eq telnet ack dscp af11 sequence 10

- name: Gather listed acls with provided configurations
  cisco.ios.ios_acls:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
# "gathered": [
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "192.0.3.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "dscp": "ef",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "icmp": {
#                                     "echo": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "192.0.2.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "eq": 10
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "110"
#                 },
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "198.51.101.0",
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "198.51.100.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "tos": {
#                                 "service_value": 12
#                             }
#                         },
#                         {
#                             "destination": {
#                                 "address": "192.0.4.0",
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "dscp": "ef",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 20,
#                             "source": {
#                                 "address": "192.0.3.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "lt": 20
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "123"
#                 },
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "address": "192.0.3.0",
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 },
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "grant": "deny",
#                             "option": {
#                                 "traceroute": true
#                             },
#                             "protocol_options": {
#                                 "tcp": {
#                                     "fin": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "address": "192.0.2.0",
#                                 "wildcard_bits": "0.0.0.255"
#                             },
#                             "ttl": {
#                                 "eq": 10
#                             }
#                         }
#                     ],
#                     "acl_type": "extended",
#                     "name": "test_acl"
#                 }
#             ],
#             "afi": "ipv4"
#         },
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 }
#                             },
#                             "dscp": "af11",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "sequence": 10,
#                             "source": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 }
#                             }
#                         }
#                     ],
#                     "name": "R1_TRAFFIC"
#                 }
#             ],
#             "afi": "ipv6"
#         }
#     ]

# Using Rendered

- name: Rendered the provided configuration with the existing running configuration
  cisco.ios.ios_acls:
    config:
      - afi: ipv4
        acls:
          - name: 110
            aces:
              - grant: deny
                sequence: 10
                protocol_options:
                  tcp:
                    syn: true
                source:
                  address: 192.0.2.0
                  wildcard_bits: 0.0.0.255
                destination:
                  address: 192.0.3.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: www
                dscp: ef
                ttl:
                  eq: 10
          - name: 150
            aces:
              - grant: deny
                protocol_options:
                  tcp:
                    syn: true
                source:
                  address: 198.51.100.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                destination:
                  address: 198.51.110.0
                  wildcard_bits: 0.0.0.255
                  port_protocol:
                    eq: telnet
                dscp: ef
                ttl:
                  eq: 10
    state: rendered

# Module Execution Result:
# ------------------------
#
# "rendered": [
#         "ip access-list extended 110",
#         "10 deny tcp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 eq www syn dscp ef ttl eq 10",
#         "ip access-list extended 150",
#         "deny tcp 198.51.100.0 0.0.0.255 eq telnet 198.51.110.0 0.0.0.255 eq telnet syn dscp ef ttl eq 10"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# IPv6 access-list R1_TRAFFIC
# deny tcp any eq www any eq telnet ack dscp af11

- name: Parse the commands for provided configuration
  cisco.ios.ios_acls:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# "parsed": [
#         {
#             "acls": [
#                 {
#                     "aces": [
#                         {
#                             "destination": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "telnet"
#                                 }
#                             },
#                             "dscp": "af11",
#                             "grant": "deny",
#                             "protocol_options": {
#                                 "tcp": {
#                                     "ack": true
#                                 }
#                             },
#                             "source": {
#                                 "any": true,
#                                 "port_protocol": {
#                                     "eq": "www"
#                                 }
#                             }
#                         }
#                     ],
#                     "name": "R1_TRAFFIC"
#                 }
#             ],
#             "afi": "ipv6"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration after module execution.

Returned: when changed

Sample: "This output will always be in the same format as the module argspec.\n"

before

dictionary

The configuration prior to the module execution.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: "This output will always be in the same format as the module argspec.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: when state is merged, replaced, overridden, deleted or purged

Sample: ["ip access-list extended 110", "deny icmp 192.0.2.0 0.0.0.255 192.0.3.0 0.0.0.255 echo dscp ef ttl eq 10", "permit ip host 2.2.2.2 host 3.3.3.3"]

gathered

list / elements=string

Facts about the network resource gathered from the remote device as structured data.

Returned: when state is gathered

Sample: ["This output will always be in the same format as the module argspec.\n"]

parsed

list / elements=string

The device native config provided in running_config option parsed into structured data as per module argspec.

Returned: when state is parsed

Sample: ["This output will always be in the same format as the module argspec.\n"]

rendered

list / elements=string

The provided configuration in the task rendered in device-native format (offline).

Returned: when state is rendered

Sample: ["ip access-list extended test", "permit ip host 2.2.2.2 host 3.3.3.3", "permit tcp host 1.1.1.1 host 5.5.5.5 eq www"]

Authors

  • Sumit Jaiswal (@justjais)

  • Sagar Paul (@KB-perByte)