cisco.ios.ios_logging module – (deprecated, removed after 2023-06-01) Manage logging on network devices
Note
This module is part of the cisco.ios collection (version 4.6.1).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ios
.
To use it in a playbook, specify: cisco.ios.ios_logging
.
New in cisco.ios 1.0.0
DEPRECATED
- Removed in:
major release after 2023-06-01
- Why:
Newer and updated modules released with more functionality.
- Alternative:
ios_logging_global
Synopsis
This module provides declarative management of logging on Cisco Ios devices.
Note
This module has a corresponding action plugin.
Aliases: logging
Parameters
Parameter |
Comments |
---|---|
List of logging definitions. |
|
Destination of the logs. On dest has to be quoted as ‘on’ or else pyyaml will convert to True before it gets to Ansible. Choices:
|
|
Set logging facility. |
|
Set logging severity levels. Choices:
|
|
The hostname or IP address of the destination. Required when dest=host. |
|
Size of buffer. The acceptable value is in range from 4096 to 4294967295 bytes. |
|
State of the logging configuration. Choices:
|
|
Destination of the logs. On dest has to be quoted as ‘on’ or else pyyaml will convert to True before it gets to Ansible. Choices:
|
|
Set logging facility. |
|
Set logging severity levels. Choices:
|
|
The hostname or IP address of the destination. Required when dest=host. |
|
Size of buffer. The acceptable value is in range from 4096 to 4294967295 bytes. |
|
State of the logging configuration. Choices:
|
Notes
Note
Tested against IOS 15.6
The ‘Default System Message Logging Configuration’ of the ios device like facility Local7 or logging on is not subjected to idempotency causes
For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`
For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.
Examples
- name: Configure host logging
cisco.ios.ios_logging:
dest: host
name: 172.16.0.1
state: present
- name: Remove host logging configuration
cisco.ios.ios_logging:
dest: host
name: 172.16.0.1
state: absent
- name: Configure console logging level and facility
cisco.ios.ios_logging:
dest: console
facility: local7
level: debugging
state: present
- name: Enable logging to all
cisco.ios.ios_logging:
dest: on
- name: Configure buffer size
cisco.ios.ios_logging:
dest: buffered
size: 5000
- name: Configure logging using aggregate
cisco.ios.ios_logging:
aggregate:
- { dest: console, level: notifications }
- { dest: buffered, size: 9000 }
- name: Remove logging using aggregate
cisco.ios.ios_logging:
aggregate:
- { dest: console, level: notifications }
- { dest: buffered, size: 9000 }
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The list of configuration mode commands to send to the device Returned: always Sample: |
Status
This module will be removed in a major release after 2023-06-01. [deprecated]
For more information see DEPRECATED.