You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.meraki.devices_switch_routing_interfaces module – Resource module for devices _switch _routing _interfaces

Note

This module is part of the cisco.meraki collection (version 2.17.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.meraki. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.meraki.devices_switch_routing_interfaces.

New in cisco.meraki 2.16.0

Synopsis 

Manage operations create, update and delete of the resource devices _switch _routing _interfaces.
Create a layer 3 interface for a switch.
Delete a layer 3 interface from the switch.
Update a layer 3 interface for a switch.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

meraki >= 2.4.9
python >= 3.5

Parameters 

Parameter	Comments
defaultGateway string	The next hop for any traffic that isn’t going to a directly connected subnet or over a static route. This IP address must exist in a subnet with a routed interface. Required if this is the first IPv4 interface.
interfaceId string	InterfaceId path parameter. Interface ID.
interfaceIp string	The IP address this switch will use for layer 3 routing on this VLAN or subnet. This cannot be the same as the switch’s management IP.
ipv6 dictionary	The IPv6 settings of the interface.
address string	The IPv6 address of the interface. Required if assignmentMode is ‘static’. Must not be included if assignmentMode is ‘eui-64’.
assignmentMode string	The IPv6 assignment mode for the interface. Can be either ‘eui-64’ or ‘static’.
gateway string	The IPv6 default gateway of the interface. Required if prefix is defined and this is the first interface with IPv6 configured for the switch.
prefix string	The IPv6 prefix of the interface. Required if IPv6 object is included.
meraki_action_batch_retry_wait_time integer	meraki_action_batch_retry_wait_time (integer), action batch concurrency error retry wait time Default: `60`
meraki_api_key string / required	meraki_api_key (string), API key generated in dashboard; can also be set as an environment variable MERAKI_DASHBOARD_API_KEY
meraki_base_url string	meraki_base_url (string), preceding all endpoint resources Default: `"https://api.meraki.com/api/v1"`
meraki_be_geo_id string	meraki_be_geo_id (string), optional partner identifier for API usage tracking; can also be set as an environment variable BE_GEO_ID Default: `""`
meraki_caller string	meraki_caller (string), optional identifier for API usage tracking; can also be set as an environment variable MERAKI_PYTHON_SDK_CALLER Default: `""`
meraki_certificate_path string	meraki_certificate_path (string), path for TLS/SSL certificate verification if behind local proxy Default: `""`
meraki_inherit_logging_config boolean	meraki_inherit_logging_config (boolean), Inherits your own logger instance Choices: `false` ← (default) `true`
meraki_log_file_prefix string	meraki_log_file_prefix (string), log file name appended with date and timestamp Default: `"meraki_api_"`
meraki_log_path string	log_path (string), path to output log; by default, working directory of script if not specified Default: `""`
meraki_maximum_retries integer	meraki_maximum_retries (integer), retry up to this many times when encountering 429s or other server-side errors Default: `2`
meraki_nginx_429_retry_wait_time integer	meraki_nginx_429_retry_wait_time (integer), Nginx 429 retry wait time Default: `60`
meraki_output_log boolean	meraki_output_log (boolean), create an output log file? Choices: `false` `true` ← (default)
meraki_print_console boolean	meraki_print_console (boolean), print logging output to console? Choices: `false` `true` ← (default)
meraki_requests_proxy string	meraki_requests_proxy (string), proxy server and port, if needed, for HTTPS Default: `""`
meraki_retry_4xx_error boolean	meraki_retry_4xx_error (boolean), retry if encountering other 4XX error (besides 429)? Choices: `false` ← (default) `true`
meraki_retry_4xx_error_wait_time integer	meraki_retry_4xx_error_wait_time (integer), other 4XX error retry wait time Default: `60`
meraki_simulate boolean	meraki_simulate (boolean), simulate POST/PUT/DELETE calls to prevent changes? Choices: `false` ← (default) `true`
meraki_single_request_timeout integer	meraki_single_request_timeout (integer), maximum number of seconds for each API call Default: `60`
meraki_suppress_logging boolean	meraki_suppress_logging (boolean), disable all logging? you’re on your own then! Choices: `false` ← (default) `true`
meraki_use_iterator_for_get_pages boolean	meraki_use_iterator_for_get_pages (boolean), list* methods will return an iterator with each object instead of a complete list with all items Choices: `false` ← (default) `true`
meraki_wait_on_rate_limit boolean	meraki_wait_on_rate_limit (boolean), retry if 429 rate limit error encountered? Choices: `false` `true` ← (default)
multicastRouting string	Enable multicast support if, multicast routing between VLANs is required. Options are ‘disabled’, ‘enabled’ or ‘IGMP snooping querier’. Default is ‘disabled’.
name string	A friendly name or description for the interface or VLAN.
ospfSettings dictionary	The OSPF routing settings of the interface.
area string	The OSPF area to which this interface should belong. Can be either ‘disabled’ or the identifier of an existing OSPF area. Defaults to ‘disabled’.
cost integer	The path cost for this interface. Defaults to 1, but can be increased up to 65535 to give lower priority.
isPassiveEnabled boolean	When enabled, OSPF will not run on the interface, but the subnet will still be advertised. Choices: `false` `true`
ospfV3 dictionary	The OSPFv3 routing settings of the interface.
area string	The OSPFv3 area to which this interface should belong. Can be either ‘disabled’ or the identifier of an existing OSPFv3 area. Defaults to ‘disabled’.
cost integer	The path cost for this interface. Defaults to 1, but can be increased up to 65535 to give lower priority.
isPassiveEnabled boolean	When enabled, OSPFv3 will not run on the interface, but the subnet will still be advertised. Choices: `false` `true`
serial string	Serial path parameter.
subnet string	The network that this routed interface is on, in CIDR notation (ex. 10.1.1.0/24).
vlanId integer	The VLAN this routed interface is on. VLAN must be between 1 and 4094.

Notes 

Note

SDK Method used are devices.Devices.create_device_switch_routing_interface, devices.Devices.delete_device_switch_routing_interface, devices.Devices.update_device_switch_routing_interface,
Paths used are post /devices/{serial}/switch/routing/interfaces, delete /devices/{serial}/switch/routing/interfaces/{interfaceId}, put /devices/{serial}/switch/routing/interfaces/{interfaceId},
Does not support check_mode
The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

Examples 

- name: Create
  cisco.meraki.devices_switch_routing_interfaces:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    defaultGateway: 192.168.1.1
    interfaceIp: 192.168.1.2
    ipv6:
      address: 1:2:3:4::1
      assignmentMode: static
      gateway: 1:2:3:4::2
      prefix: 1:2:3:4::/48
    multicastRouting: disabled
    name: L3 interface
    ospfSettings:
      area: '0'
      cost: 1
      isPassiveEnabled: true
    ospfV3:
      area: '1'
      cost: 2
      isPassiveEnabled: true
    serial: string
    subnet: 192.168.1.0/24
    vlanId: 100

- name: Update by id
  cisco.meraki.devices_switch_routing_interfaces:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: present
    defaultGateway: 192.168.1.1
    interfaceId: string
    interfaceIp: 192.168.1.2
    ipv6:
      address: 1:2:3:4::1
      assignmentMode: static
      gateway: 1:2:3:4::2
      prefix: 1:2:3:4::/48
    multicastRouting: disabled
    name: L3 interface
    ospfSettings:
      area: '0'
      cost: 1
      isPassiveEnabled: true
    ospfV3:
      area: '1'
      cost: 2
      isPassiveEnabled: true
    serial: string
    subnet: 192.168.1.0/24
    vlanId: 100

- name: Delete by id
  cisco.meraki.devices_switch_routing_interfaces:
    meraki_api_key: "{{meraki_api_key}}"
    meraki_base_url: "{{meraki_base_url}}"
    meraki_single_request_timeout: "{{meraki_single_request_timeout}}"
    meraki_certificate_path: "{{meraki_certificate_path}}"
    meraki_requests_proxy: "{{meraki_requests_proxy}}"
    meraki_wait_on_rate_limit: "{{meraki_wait_on_rate_limit}}"
    meraki_nginx_429_retry_wait_time: "{{meraki_nginx_429_retry_wait_time}}"
    meraki_action_batch_retry_wait_time: "{{meraki_action_batch_retry_wait_time}}"
    meraki_retry_4xx_error: "{{meraki_retry_4xx_error}}"
    meraki_retry_4xx_error_wait_time: "{{meraki_retry_4xx_error_wait_time}}"
    meraki_maximum_retries: "{{meraki_maximum_retries}}"
    meraki_output_log: "{{meraki_output_log}}"
    meraki_log_file_prefix: "{{meraki_log_file_prefix}}"
    meraki_log_path: "{{meraki_log_path}}"
    meraki_print_console: "{{meraki_print_console}}"
    meraki_suppress_logging: "{{meraki_suppress_logging}}"
    meraki_simulate: "{{meraki_simulate}}"
    meraki_be_geo_id: "{{meraki_be_geo_id}}"
    meraki_use_iterator_for_get_pages: "{{meraki_use_iterator_for_get_pages}}"
    meraki_inherit_logging_config: "{{meraki_inherit_logging_config}}"
    state: absent
    interfaceId: string
    serial: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

meraki_response

dictionary

A dictionary or list with the response returned by the Cisco Meraki Python SDK

Returned: always

Sample: {"defaultGateway": "string", "interfaceId": "string", "interfaceIp": "string", "ipv6": {"address": "string", "assignmentMode": "string", "gateway": "string", "prefix": "string"}, "multicastRouting": "string", "name": "string", "ospfSettings": {"area": "string", "cost": 0, "isPassiveEnabled": true}, "ospfV3": {"area": "string", "cost": 0, "isPassiveEnabled": true}, "subnet": "string", "vlanId": 0}

Authors

Francisco Munoz (@fmunoz)

cisco.meraki.devices_switch_routing_interfaces module – Resource module for devices _switch _routing _interfaces

Synopsis 

Requirements 

Parameters 

Notes 

See Also 

Examples 

Return Values 

Authors

Collection links

cisco.meraki.devices_switch_routing_interfaces module – Resource module for devices _switch _routing _interfaces

Synopsis

Requirements

Parameters

Notes

See Also

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

See Also 

Examples 

Return Values 