cisco.nxos.nxos_bgp module – (deprecated, removed after 2023-01-27) Manages BGP configuration.

Note

This module is part of the cisco.nxos collection (version 4.4.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bgp.

New in cisco.nxos 1.0.0

DEPRECATED

Removed in:

major release after 2023-01-27

Why:

Updated module released with more functionality.

Alternative:

nxos_bgp_global

Synopsis

  • Manages BGP configurations on NX-OS switches.

Note

This module has a corresponding action plugin.

Aliases: bgp

Parameters

Parameter

Comments

asn

string / required

BGP autonomous system number. Valid values are String, Integer in ASPLAIN or ASDOT notation.

bestpath_always_compare_med

boolean

Enable/Disable MED comparison on paths from different autonomous systems.

Choices:

  • false

  • true

bestpath_aspath_multipath_relax

boolean

Enable/Disable load sharing across the providers with different (but equal-length) AS paths.

Choices:

  • false

  • true

bestpath_compare_neighborid

boolean

Enable/Disable neighborid. Use this when more paths available than max path config.

Choices:

  • false

  • true

bestpath_compare_routerid

boolean

Enable/Disable comparison of router IDs for identical eBGP paths.

Choices:

  • false

  • true

bestpath_cost_community_ignore

boolean

Enable/Disable Ignores the cost community for BGP best-path calculations.

Choices:

  • false

  • true

bestpath_med_confed

boolean

Enable/Disable enforcement of bestpath to do a MED comparison only between paths originated within a confederation.

Choices:

  • false

  • true

bestpath_med_missing_as_worst

boolean

Enable/Disable assigns the value of infinity to received routes that do not carry the MED attribute, making these routes the least desirable.

Choices:

  • false

  • true

bestpath_med_non_deterministic

boolean

Enable/Disable deterministic selection of the best MED pat from among the paths from the same autonomous system.

Choices:

  • false

  • true

cluster_id

string

Route Reflector Cluster-ID.

confederation_id

string

Routing domain confederation AS.

confederation_peers

list / elements=string

AS confederation parameters.

disable_policy_batching

boolean

Enable/Disable the batching evaluation of prefix advertisement to all peers.

Choices:

  • false

  • true

disable_policy_batching_ipv4_prefix_list

string

Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.

disable_policy_batching_ipv6_prefix_list

string

Enable/Disable the batching evaluation of prefix advertisements to all peers with prefix list.

enforce_first_as

boolean

Enable/Disable enforces the neighbor autonomous system to be the first AS number listed in the AS path attribute for eBGP. On NX-OS, this property is only supported in the global BGP context.

Choices:

  • false

  • true

event_history_cli

string

Enable/Disable cli event history buffer.

Choices:

  • "size_small"

  • "size_medium"

  • "size_large"

  • "size_disable"

  • "default"

  • "true"

  • "false"

event_history_detail

string

Enable/Disable detail event history buffer.

Choices:

  • "size_small"

  • "size_medium"

  • "size_large"

  • "size_disable"

  • "default"

  • "true"

  • "false"

event_history_events

string

Enable/Disable event history buffer.

Choices:

  • "size_small"

  • "size_medium"

  • "size_large"

  • "size_disable"

  • "default"

  • "true"

  • "false"

event_history_periodic

string

Enable/Disable periodic event history buffer.

Choices:

  • "size_small"

  • "size_medium"

  • "size_large"

  • "size_disable"

  • "default"

  • "true"

  • "false"

fast_external_fallover

boolean

Enable/Disable immediately reset the session if the link to a directly connected BGP peer goes down. Only supported in the global BGP context.

Choices:

  • false

  • true

flush_routes

boolean

Enable/Disable flush routes in RIB upon controlled restart. On NX-OS, this property is only supported in the global BGP context.

Choices:

  • false

  • true

graceful_restart

boolean

Enable/Disable graceful restart.

Choices:

  • false

  • true

graceful_restart_helper

boolean

Enable/Disable graceful restart helper mode.

Choices:

  • false

  • true

graceful_restart_timers_restart

string

Set maximum time for a restart sent to the BGP peer.

graceful_restart_timers_stalepath_time

string

Set maximum time that BGP keeps the stale routes from the restarting BGP peer.

isolate

boolean

Enable/Disable isolate this router from BGP perspective.

Choices:

  • false

  • true

local_as

string

Local AS number to be used within a VRF instance.

log_neighbor_changes

boolean

Enable/Disable message logging for neighbor up/down event.

Choices:

  • false

  • true

maxas_limit

string

Specify Maximum number of AS numbers allowed in the AS-path attribute. Valid values are between 1 and 512.

neighbor_down_fib_accelerate

boolean

Enable/Disable handle BGP neighbor down event, due to various reasons.

Choices:

  • false

  • true

reconnect_interval

string

The BGP reconnection interval for dropped sessions. Valid values are between 1 and 60.

router_id

string

Router Identifier (ID) of the BGP router VRF instance.

shutdown

boolean

Administratively shutdown the BGP protocol.

Choices:

  • false

  • true

state

string

Determines whether the config should be present or not on the device.

Choices:

  • "present" ← (default)

  • "absent"

suppress_fib_pending

boolean

Enable/Disable advertise only routes programmed in hardware to peers.

Choices:

  • false

  • true

timer_bestpath_limit

string

Specify timeout for the first best path after a restart, in seconds.

timer_bgp_hold

string

Set BGP hold timer.

timer_bgp_keepalive

string

Set BGP keepalive timer.

vrf

string

Name of the VRF. The name ‘default’ is a valid VRF representing the global BGP.

Default: "default"

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL

  • Unsupported for Cisco MDS

  • state=absent removes the whole BGP ASN configuration when vrf=default or the whole VRF instance within the BGP process when using a different VRF.

  • Default when supported restores params default value.

  • Configuring global params is only permitted if vrf=default.

  • For information on using CLI and NX-API see the :ref:`NXOS Platform Options guide <nxos_platform_options>`

  • For more information on using Ansible to manage network devices see the :ref:`Ansible Network Guide <network_guide>`

  • For more information on using Ansible to manage Cisco devices see the `Cisco integration page <https://www.ansible.com/integrations/networks/cisco>`_.

Examples

- name: Configure a simple ASN
  cisco.nxos.nxos_bgp:
    asn: 65535
    vrf: test
    router_id: 192.0.2.1
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

commands sent to the device

Returned: always

Sample: ["router bgp 65535", "vrf test", "router-id 192.0.2.1"]

Status

  • This module will be removed in a major release after 2023-01-27. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Jason Edelman (@jedelman8)

  • Gabriele Gerbino (@GGabriele)