cisco.nxos.nxos_ospfv2 module – OSPFv2 resource module

Note

This module is part of the cisco.nxos collection (version 4.4.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_ospfv2.

New in cisco.nxos 1.0.0

Synopsis

  • This module manages OSPFv2 configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Aliases: ospfv2

Parameters

Parameter

Comments

config

dictionary

A list of OSPF process configuration.

processes

list / elements=dictionary

A list of OSPF instances’ configurations.

areas

list / elements=dictionary

Configure properties of OSPF Areas.

area_id

string / required

The Area ID in IP Address format.

authentication

dictionary

Authentication settings for the Area.

message_digest

boolean

Use message-digest authentication.

Choices:

  • false

  • true

set

boolean

Set authentication for the area.

Choices:

  • false

  • true

default_cost

integer

Specify the default cost for default summary LSA.

filter_list

list / elements=dictionary

Filter prefixes between OSPF areas.

direction

string / required

The direction to apply the route map.

Choices:

  • "in"

  • "out"

route_map

string / required

The Route-map name.

nssa

dictionary

NSSA settings for the area.

default_information_originate

boolean

Originate Type-7 default LSA into NSSA area.

Choices:

  • false

  • true

no_redistribution

boolean

Do not send redistributed LSAs into NSSA area.

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSAs into NSSA area.

Choices:

  • false

  • true

set

boolean

Configure area as NSSA.

Choices:

  • false

  • true

translate

dictionary

Translate LSA.

type7

dictionary

Translate from Type 7 to Type 5.

always

boolean

Always translate LSAs

Choices:

  • false

  • true

never

boolean

Never translate LSAs

Choices:

  • false

  • true

supress_fa

boolean

Suppress forwarding address in translated LSAs.

Choices:

  • false

  • true

ranges

list / elements=dictionary

Configure an address range for the area.

cost

integer

Cost to use for the range.

not_advertise

boolean

Suppress advertising the specified range.

Choices:

  • false

  • true

prefix

string / required

IP in Prefix format (x.x.x.x/len)

stub

dictionary

Settings for configuring the area as a stub.

no_summary

boolean

Prevent ABR from sending summary LSAs into stub area.

Choices:

  • false

  • true

set

boolean

Configure the area as a stub.

Choices:

  • false

  • true

auto_cost

dictionary

Calculate OSPF cost according to bandwidth.

reference_bandwidth

integer / required

Reference bandwidth used to assign OSPF cost.

unit

string / required

Specify in which unit the reference bandwidth is specified.

Choices:

  • "Gbps"

  • "Mbps"

bfd

boolean

Enable BFD on all OSPF interfaces.

Choices:

  • false

  • true

default_information

dictionary

Control distribution of default routes.

originate

dictionary

Distribute a default route.

always

boolean

Always advertise a default route.

Choices:

  • false

  • true

route_map

string

Policy to control distribution of default routes

set

boolean

Enable distribution of default route.

Choices:

  • false

  • true

default_metric

integer

Specify default metric for redistributed routes.

distance

integer

Configure the OSPF administrative distance.

flush_routes

boolean

Flush routes on a non-graceful controlled restart.

Choices:

  • false

  • true

graceful_restart

dictionary

Configure graceful restart.

grace_period

integer

Configure maximum interval to restart gracefully.

helper_disable

boolean

Enable/Disable helper mode.

Choices:

  • false

  • true

set

boolean

Enable graceful-restart.

Choices:

  • false

  • true

isolate

boolean

Isolate this router from OSPF perspective.

Choices:

  • false

  • true

log_adjacency_changes

dictionary

Log changes in adjacency state.

detail

boolean

Notify all state changes.

Choices:

  • false

  • true

log

boolean

Enable/disable logging changes in adjacency state.

Choices:

  • false

  • true

max_lsa

dictionary

Feature to limit the number of non-self-originated LSAs.

ignore_count

integer

Set count on how many times adjacencies can be suppressed.

ignore_time

integer

Set time during which all adjacencies are suppressed.

max_non_self_generated_lsa

integer / required

Set the maximum number of non self-generated LSAs.

reset_time

integer

Set number of minutes after which ignore-count is reset to zero.

threshold

integer

Threshold value (%) at which to generate a warning message.

warning_only

boolean

Log a warning message when limit is exceeded.

Choices:

  • false

  • true

max_metric

dictionary

Maximize the cost metric.

router_lsa

dictionary

Router LSA configuration.

external_lsa

dictionary

External LSA configuration.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

include_stub

boolean

Advertise Max metric for Stub links as well.

Choices:

  • false

  • true

on_startup

dictionary

Effective only at startup.

set

boolean

Set on-startup attribute.

Choices:

  • false

  • true

wait_for_bgp_asn

integer

ASN of BGP to wait for.

wait_period

integer

Wait period in seconds after startup.

set

boolean

Set router-lsa attribute.

Choices:

  • false

  • true

summary_lsa

dictionary

Summary LSAs configuration.

max_metric_value

integer

Max metric value for summary LSAs.

set

boolean

Set summary-lsa attribute.

Choices:

  • false

  • true

maximum_paths

integer

Maximum paths per destination.

mpls

dictionary

OSPF MPLS configuration settings.

traffic_eng

dictionary

OSPF MPLS Traffic Engineering commands.

areas

list / elements=dictionary

List of Area IDs.

area_id

string

Area Id in ip address format.

multicast_intact

boolean

MPLS TE multicast support.

Choices:

  • false

  • true

router_id

string

Router ID associated with TE.

name_lookup

boolean

Display OSPF router ids as DNS names.

Choices:

  • false

  • true

passive_interface

dictionary

Suppress routing updates on the interface.

default

boolean

Interfaces passive by default.

Choices:

  • false

  • true

process_id

string / required

The OSPF process tag.

redistribute

list / elements=dictionary

Redistribute information from another routing protocol.

id

string

The identifier for the protocol specified.

protocol

string / required

The name of the protocol.

Choices:

  • "bgp"

  • "direct"

  • "eigrp"

  • "isis"

  • "lisp"

  • "ospf"

  • "rip"

  • "static"

route_map

string / required

The route map policy to constrain redistribution.

rfc1583compatibility

boolean

Configure 1583 compatibility for external path preferences.

Choices:

  • false

  • true

router_id

string

Set OSPF process router-id.

shutdown

boolean

Shutdown the OSPF protocol instance.

Choices:

  • false

  • true

summary_address

list / elements=dictionary

Configure route summarization for redistribution.

not_advertise

boolean

Suppress advertising the specified summary.

Choices:

  • false

  • true

prefix

string / required

IP prefix in format x.x.x.x/ml.

tag

integer

A 32-bit tag value.

table_map

dictionary

Policy for filtering/modifying OSPF routes before sending them to RIB.

filter

boolean

Block the OSPF routes from being sent to RIB.

Choices:

  • false

  • true

name

string / required

The Route Map name.

timers

dictionary

Configure timer related constants.

lsa_arrival

integer

Mimimum interval between arrival of a LSA.

lsa_group_pacing

integer

LSA group refresh/maxage interval.

throttle

dictionary

Configure throttle related constants.

lsa

dictionary

Set rate-limiting for LSA generation.

hold_interval

integer

The hold interval.

max_interval

integer

The max interval.

start_interval

integer

The start interval.

spf

dictionary

Set OSPF SPF timers.

initial_spf_delay

integer

Initial SPF schedule delay in milliseconds.

max_wait_time

integer

Maximum wait time between SPF calculations.

min_hold_time

integer

Minimum hold time between SPF calculations.

vrfs

list / elements=dictionary

Configure VRF specific OSPF settings.

areas

list / elements=dictionary

Configure properties of OSPF Areas.

area_id

string / required

The Area ID in IP Address format.

authentication

dictionary

Authentication settings for the Area.

message_digest

boolean

Use message-digest authentication.

Choices:

  • false

  • true

set

boolean

Set authentication for the area.

Choices:

  • false

  • true

default_cost

integer

Specify the default cost for default summary LSA.

filter_list

list / elements=dictionary

Filter prefixes between OSPF areas.

direction

string / required

The direction to apply the route map.

Choices:

  • "in"

  • "out"

route_map

string / required

The Route-map name.

nssa

dictionary

NSSA settings for the area.

default_information_originate

boolean

Originate Type-7 default LSA into NSSA area.

Choices:

  • false

  • true

no_redistribution

boolean

Do not send redistributed LSAs into NSSA area.

Choices:

  • false

  • true

no_summary

boolean

Do not send summary LSAs into NSSA area.

Choices:

  • false

  • true

set

boolean

Configure area as NSSA.

Choices:

  • false

  • true

translate

dictionary

Translate LSA.

type7

dictionary

Translate from Type 7 to Type 5.

always

boolean

Always translate LSAs

Choices:

  • false

  • true

never

boolean

Never translate LSAs

Choices:

  • false

  • true

supress_fa

boolean

Suppress forwarding address in translated LSAs.

Choices:

  • false

  • true

ranges

list / elements=dictionary

Configure an address range for the area.

cost

integer

Cost to use for the range.

not_advertise

boolean

Suppress advertising the specified range.

Choices:

  • false

  • true

prefix

string / required

IP in Prefix format (x.x.x.x/len)

stub

dictionary

Settings for configuring the area as a stub.

no_summary

boolean

Prevent ABR from sending summary LSAs into stub area.

Choices:

  • false

  • true

set

boolean

Configure the area as a stub.

Choices:

  • false

  • true

auto_cost

dictionary

Calculate OSPF cost according to bandwidth.

reference_bandwidth

integer / required

Reference bandwidth used to assign OSPF cost.

unit

string / required

Specify in which unit the reference bandwidth is specified.

Choices:

  • "Gbps"

  • "Mbps"

bfd

boolean

Enable BFD on all OSPF interfaces.

Choices:

  • false

  • true

capability

dictionary

OSPF capability settings.

vrf_lite

dictionary

Enable VRF-lite capability settings.

evpn

boolean

Ethernet VPN.

Choices:

  • false

  • true

set

boolean

Enable VRF-lite support.

Choices:

  • false

  • true

default_information

dictionary

Control distribution of default routes.

originate

dictionary

Distribute a default route.

always

boolean

Always advertise a default route.

Choices:

  • false

  • true

route_map

string

Policy to control distribution of default routes

set

boolean

Enable distribution of default route.

Choices:

  • false

  • true

default_metric

integer

Specify default metric for redistributed routes.

distance

integer

Configure the OSPF administrative distance.

down_bit_ignore

boolean

Configure a PE router to ignore the DN bit for network summary, external and NSSA external LSA.

Choices:

  • false

  • true

graceful_restart

dictionary

Configure graceful restart.

grace_period

integer

Configure maximum interval to restart gracefully.

helper_disable

boolean

Enable/Disable helper mode.

Choices:

  • false

  • true

set

boolean

Enable graceful-restart.

Choices:

  • false

  • true

log_adjacency_changes

dictionary

Log changes in adjacency state.

detail

boolean

Notify all state changes.

Choices:

  • false

  • true

log

boolean

Enable/disable logging changes in adjacency state.

Choices:

  • false

  • true

max_lsa

dictionary

Feature to limit the number of non-self-originated LSAs.

ignore_count

integer

Set count on how many times adjacencies can be suppressed.

ignore_time

integer

Set time during which all adjacencies are suppressed.

max_non_self_generated_lsa

integer / required

Set the maximum number of non self-generated LSAs.

reset_time

integer

Set number of minutes after which ignore-count is reset to zero.

threshold

integer

Threshold value (%) at which to generate a warning message.

warning_only

boolean

Log a warning message when limit is exceeded.

Choices:

  • false

  • true

max_metric

dictionary

Maximize the cost metric.

router_lsa

dictionary

Router LSA configuration.

external_lsa

dictionary

External LSA configuration.

max_metric_value

integer

Set max metric value for external LSAs.

set

boolean

Set external-lsa attribute.

Choices:

  • false

  • true

include_stub

boolean

Advertise Max metric for Stub links as well.

Choices:

  • false

  • true

on_startup

dictionary

Effective only at startup.

set

boolean

Set on-startup attribute.

Choices:

  • false

  • true

wait_for_bgp_asn

integer

ASN of BGP to wait for.

wait_period

integer

Wait period in seconds after startup.

set

boolean

Set router-lsa attribute.

Choices:

  • false

  • true

summary_lsa

dictionary

Summary LSAs configuration.

max_metric_value

integer

Max metric value for summary LSAs.

set

boolean

Set summary-lsa attribute.

Choices:

  • false

  • true

maximum_paths

integer

Maximum paths per destination.

name_lookup

boolean

Display OSPF router ids as DNS names.

Choices:

  • false

  • true

passive_interface

dictionary

Suppress routing updates on the interface.

default

boolean

Interfaces passive by default.

Choices:

  • false

  • true

redistribute

list / elements=dictionary

Redistribute information from another routing protocol.

id

string

The identifier for the protocol specified.

protocol

string / required

The name of the protocol.

Choices:

  • "bgp"

  • "direct"

  • "eigrp"

  • "isis"

  • "lisp"

  • "ospf"

  • "rip"

  • "static"

route_map

string / required

The route map policy to constrain redistribution.

rfc1583compatibility

boolean

Configure 1583 compatibility for external path preferences.

Choices:

  • false

  • true

router_id

string

Set OSPF process router-id.

shutdown

boolean

Shutdown the OSPF protocol instance.

Choices:

  • false

  • true

summary_address

list / elements=dictionary

Configure route summarization for redistribution.

not_advertise

boolean

Suppress advertising the specified summary.

Choices:

  • false

  • true

prefix

string / required

IP prefix in format x.x.x.x/ml.

tag

integer

A 32-bit tag value.

table_map

dictionary

Policy for filtering/modifying OSPF routes before sending them to RIB.

filter

boolean

Block the OSPF routes from being sent to RIB.

Choices:

  • false

  • true

name

string / required

The Route Map name.

timers

dictionary

Configure timer related constants.

lsa_arrival

integer

Mimimum interval between arrival of a LSA.

lsa_group_pacing

integer

LSA group refresh/maxage interval.

throttle

dictionary

Configure throttle related constants.

lsa

dictionary

Set rate-limiting for LSA generation.

hold_interval

integer

The hold interval.

max_interval

integer

The max interval.

start_interval

integer

The start interval.

spf

dictionary

Set OSPF SPF timers.

initial_spf_delay

integer

Initial SPF schedule delay in milliseconds.

max_wait_time

integer

Maximum wait time between SPF calculations.

min_hold_time

integer

Minimum hold time between SPF calculations.

vrf

string / required

Name/Identifier of the VRF.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the NX-OS device by executing the command show running-config | section “^router ospf .*”.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • "merged" ← (default)

  • "replaced"

  • "overridden"

  • "deleted"

  • "gathered"

  • "parsed"

  • "rendered"

Notes

Note

  • Tested against NX-OS 7.0(3)I5(1).

  • Unsupported for Cisco MDS

  • This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 100
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_1
            direction: in
          - route_map: rmap_2
            direction: out
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
          - prefix: 198.51.100.96/27
            cost: 120
        - area_id: 0.0.0.101
          authentication:
            message_digest: true
        redistribute:
        - protocol: eigrp
          id: 120
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: static
            route_map: zone1-static-connect
          summary_address:
          - prefix: 198.51.100.128/27
            tag: 121
          - prefix: 198.51.100.160/27
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
          - area_id: 0.0.0.103
            nssa:
              no_summary: true
              translate:
                type7:
                  always: true
        - vrf: zone2
          auto_cost:
            reference_bandwidth: 45
            unit: Gbps
    state: merged

# Task output
# -------------
# before: {}
#
# commands:
#  - router ospf 102
#  - router-id 198.51.100.1
#  - redistribute eigrp 120 route-map rmap_1
#  - redistribute direct route-map ospf102-direct-connect
#  - area 0.0.0.100 filter-list route-map rmap_1 in
#  - area 0.0.0.100 filter-list route-map rmap_2 out
#  - area 0.0.0.100 range 198.51.100.64/27 not-advertise
#  - area 0.0.0.100 range 198.51.100.96/27 cost 120
#  - area 0.0.0.101 authentication message-digest
#  - vrf zone1
#  - router-id 198.51.100.129
#  - summary-address 198.51.100.128/27 tag 121
#  - summary-address 198.51.100.160/27
#  - redistribute static route-map zone1-static-connect
#  - area 0.0.0.102 nssa no-summary default-information-originate
#  - area 0.0.0.103 nssa no-summary
#  - area 0.0.0.103 nssa translate type7 always
#  - vrf zone2
#  - auto-cost reference-bandwidth 45 Gbps
#  - router ospf 100
#  - router-id 203.0.113.20
#
# after:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

# Using replaced

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Replace device configurations of listed OSPF processes with provided configurations
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_8
            direction: in
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
        - area_id: 0.0.0.101
          stub:
            no_summary: true
        redistribute:
        - protocol: eigrp
          id: 130
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: bgp
            id: 65563
            route_map: zone1-bgp-connect
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
    state: replaced

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
#  commands:
#  - router ospf 102
#  - redistribute eigrp 130 route-map rmap_1
#  - no redistribute eigrp 120 route-map rmap_1
#  - area 0.0.0.100 filter-list route-map rmap_8 in
#  - no area 0.0.0.100 filter-list route-map rmap_2 out
#  - no area 0.0.0.100 range 198.51.100.96/27
#  - no area 0.0.0.101 authentication
#  - area 0.0.0.101 stub no-summary
#  - vrf zone1
#  - no summary-address 198.51.100.128/27 tag 121
#  - no summary-address 198.51.100.160/27
#  - redistribute bgp 65563 route-map zone1-bgp-connect
#  - no redistribute static route-map zone1-static-connect
#  - no area 0.0.0.103 nssa
#  - no area 0.0.0.103 nssa translate type7 always
#  - no vrf zone2
#
# after:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.101
#        stub:
#          no_summary: true
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: in
#          route_map: rmap_8
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "130"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        redistribute:
#        - id: "65563"
#          protocol: bgp
#          route_map: zone1-bgp-connect
#        router_id: 198.51.100.129
#        vrf: zone1

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   area 0.0.0.101 stub no-summary
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 130 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_8 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     redistribute bgp 65563 route-map zone1-bgp-connect

# Using overridden

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Override all OSPF configuration with provided configuration
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 104
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        shutdown: true
    state: overridden

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 100
#  - router ospf 104
#  - router-id 203.0.113.20
#  - router ospf 102
#  - shutdown
#  - no redistribute direct route-map ospf102-direct-connect
#  - no redistribute eigrp 120 route-map rmap_1
#  - no area 0.0.0.100 filter-list route-map rmap_2 out
#  - no area 0.0.0.100 filter-list route-map rmap_1 in
#  - no area 0.0.0.100 range 198.51.100.64/27
#  - no area 0.0.0.100 range 198.51.100.96/27
#  - no area 0.0.0.101 authentication
#  - no vrf zone1
#  - no vrf zone2
#
# after:
#    processes:
#    - process_id: "102"
#      router_id: 198.51.100.1
#      shutdown: true
#    - process_id: "104"
#      router_id: 203.0.113.20

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 102
#   router-id 198.51.100.1
#   shutdown
# router ospf 104
#   router-id 203.0.113.20

# Using deleted to delete a single OSPF process

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Delete a single OSPF process
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 102
    state: deleted

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 102
#
# after:
#   processes:
#   - process_id: "100"
#     router_id: 203.0.113.20

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20

# Using deleted all OSPF processes from the device

# Before state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# router ospf 100
#   router-id 203.0.113.20
# router ospf 102
#   router-id 198.51.100.1
#   redistribute direct route-map ospf102-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 198.51.100.64/27 not-advertise
#   area 0.0.0.100 range 198.51.100.96/27 cost 120
#   area 0.0.0.101 authentication message-digest
#   vrf zone1
#     router-id 198.51.100.129
#     area 0.0.0.102 nssa no-summary default-information-originate
#     area 0.0.0.103 nssa no-summary
#     area 0.0.0.103 nssa translate type7 always
#     redistribute static route-map zone1-static-connect
#     summary-address 198.51.100.128/27 tag 121
#     summary-address 198.51.100.160/27
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps

- name: Delete all OSPF processes from the device
  cisco.nxos.nxos_ospfv2:
    state: deleted

# Task output
# -------------
# before:
#    processes:
#    - process_id: "100"
#      router_id: 203.0.113.20
#    - areas:
#      - area_id: 0.0.0.100
#        filter_list:
#        - direction: out
#          route_map: rmap_2
#        - direction: in
#          route_map: rmap_1
#        ranges:
#        - not_advertise: true
#          prefix: 198.51.100.64/27
#        - cost: 120
#          prefix: 198.51.100.96/27
#      - area_id: 0.0.0.101
#        authentication:
#          message_digest: true
#      process_id: "102"
#      redistribute:
#      - protocol: direct
#        route_map: ospf102-direct-connect
#      - id: "120"
#        protocol: eigrp
#        route_map: rmap_1
#      router_id: 198.51.100.1
#      vrfs:
#      - areas:
#        - area_id: 0.0.0.102
#          nssa:
#            default_information_originate: true
#            no_summary: true
#        - area_id: 0.0.0.103
#          nssa:
#            no_summary: true
#            translate:
#              type7:
#                always: true
#        redistribute:
#        - protocol: static
#          route_map: zone1-static-connect
#        router_id: 198.51.100.129
#        vrf: zone1
#      - auto_cost:
#          reference_bandwidth: 45
#          unit: Gbps
#        vrf: zone2
#
# commands:
#  - no router ospf 100
#  - no router ospf 102
#
#  after: {}

# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^router ospf .*"
# nxos-9k-rdo#

# Using rendered

- name: Render platform specific configuration lines (without connecting to the device)
  cisco.nxos.nxos_ospfv2:
    config:
      processes:
      - process_id: 100
        router_id: 203.0.113.20
      - process_id: 102
        router_id: 198.51.100.1
        areas:
        - area_id: 0.0.0.100
          filter_list:
          - route_map: rmap_1
            direction: in
          - route_map: rmap_2
            direction: out
          ranges:
          - prefix: 198.51.100.64/27
            not_advertise: true
          - prefix: 198.51.100.96/27
            cost: 120
        - area_id: 0.0.0.101
          authentication:
            message_digest: true
        redistribute:
        - protocol: eigrp
          id: 120
          route_map: rmap_1
        - protocol: direct
          route_map: ospf102-direct-connect
        vrfs:
        - vrf: zone1
          router_id: 198.51.100.129
          redistribute:
          - protocol: static
            route_map: zone1-static-connect
          summary_address:
          - prefix: 198.51.100.128/27
            tag: 121
          - prefix: 198.51.100.160/27
          areas:
          - area_id: 0.0.0.102
            nssa:
              default_information_originate: true
              no_summary: true
          - area_id: 0.0.0.103
            nssa:
              no_summary: true
              translate:
                type7:
                  always: true
        - vrf: zone2
          auto_cost:
            reference_bandwidth: 45
            unit: Gbps
    state: rendered

# Task Output (redacted)
# -----------------------
# rendered:
#  - router ospf 100
#  - router-id 203.0.113.20
#  - router ospf 102
#  - router-id 198.51.100.1
#  - redistribute eigrp 120 route-map rmap_1
#  - redistribute direct route-map ospf102-direct-connect
#  - area 0.0.0.100 filter-list route-map rmap_1 in
#  - area 0.0.0.100 filter-list route-map rmap_2 out
#  - area 0.0.0.100 range 198.51.100.64/27 not-advertise
#  - area 0.0.0.100 range 198.51.100.96/27 cost 120
#  - area 0.0.0.101 authentication message-digest
#  - vrf zone1
#  - router-id 198.51.100.129
#  - summary-address 198.51.100.128/27 tag 121
#  - summary-address 198.51.100.160/27
#  - redistribute static route-map zone1-static-connect
#  - area 0.0.0.102 nssa no-summary default-information-originate
#  - area 0.0.0.103 nssa no-summary
#  - area 0.0.0.103 nssa translate type7 always
#  - vrf zone2
#  - auto-cost reference-bandwidth 45 Gbps

# Using parsed

# parsed.cfg
# ------------
# router ospf 100
#   router-id 192.0.100.1
#   area 0.0.0.101 nssa no-summary no-redistribution
#   area 0.0.0.102 stub no-summary
#   redistribute direct route-map ospf-direct-connect
#   redistribute eigrp 120 route-map rmap_1
#   area 0.0.0.100 filter-list route-map rmap_2 out
#   area 0.0.0.100 filter-list route-map rmap_1 in
#   area 0.0.0.100 range 192.0.2.0/24 not-advertise
#   area 0.0.0.100 range 192.0.3.0/24 cost 120
#   area 0.0.0.100 authentication message-digest
#   vrf zone1
#     router-id 192.0.100.2
#     area 0.0.100.1 nssa no-summary no-redistribution
#     redistribute static route-map zone1-direct-connect
#     summary-address 10.0.0.0/24 tag 120
#     summary-address 11.0.0.0/24 not-advertise
#   vrf zone2
#     auto-cost reference-bandwidth 45 Gbps
#     down-bit-ignore
#     capability vrf-lite evpn
#     shutdown
# router ospf 102
#   router-id 198.54.100.1
#   shutdown
#   vrf zone2
#     summary-address 192.0.8.0/24 tag 120
#   vrf zone4
#     shutdown

- name: Parse externally provided OSPFv2 config
  cisco.nxos.nxos_ospfv2:
    running_config: "{{ lookup('file', 'ospfv2.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
# parsed:
#   processes:
#   - process_id: "100"
#     areas:
#       - area_id: 0.0.0.101
#         nssa:
#           no_redistribution: true
#           no_summary: true
#       - area_id: 0.0.0.102
#         stub:
#           no_summary: true
#       - area_id: 0.0.0.100
#         authentication:
#           message_digest: true
#         filter_list:
#           - direction: out
#             route_map: rmap_2
#           - direction: in
#             route_map: rmap_1
#         ranges:
#           - not_advertise: true
#             prefix: 192.0.2.0/24
#           - cost: 120
#             prefix: 192.0.3.0/24
#     redistribute:
#       - protocol: direct
#         route_map: ospf-direct-connect
#       - id: "120"
#         protocol: eigrp
#         route_map: rmap_1
#     router_id: 192.0.100.1
#     vrfs:
#       - vrf: zone1
#         areas:
#           - area_id: 0.0.100.1
#             nssa:
#               no_redistribution: true
#               no_summary: true
#         redistribute:
#           - protocol: static
#             route_map: zone1-direct-connect
#         router_id: 192.0.100.2
#         summary_address:
#           - prefix: 10.0.0.0/24
#             tag: 120
#           - not_advertise: true
#             prefix: 11.0.0.0/24
#       - vrf: zone2
#         auto_cost:
#           reference_bandwidth: 45
#           unit: Gbps
#         capability:
#           vrf_lite:
#             evpn: true
#         down_bit_ignore: true
#         shutdown: true
#   - process_id: "102"
#     router_id: 198.54.100.1
#     shutdown: true
#     vrfs:
#       - vrf: zone2
#         summary_address:
#           - prefix: 192.0.8.0/24
#             tag: 120
#       - vrf: zone4
#         shutdown: true

# Using gathered

- name: Gather OSPFv2 facts using gathered
  cisco.nxos.nxos_ospfv2:
    state: gathered

# Task output (redacted)
# -----------------------
#  gathered:
#    processes:
#      - process_id: "102"
#        areas:
#          - area_id: 0.0.0.101
#            stub:
#              no_summary: true
#          - area_id: 0.0.0.100
#            filter_list:
#              - direction: in
#                route_map: rmap_8
#            ranges:
#              - not_advertise: true
#                prefix: 198.51.100.64/27
#        redistribute:
#          - protocol: direct
#            route_map: ospf102-direct-connect
#          - id: "130"
#            protocol: eigrp
#            route_map: rmap_1
#        router_id: 198.51.100.1
#        vrfs:
#          - vrf: zone1
#            areas:
#              - area_id: 0.0.0.102
#                nssa:
#                  default_information_originate: true
#                  no_summary: true
#            redistribute:
#             - id: "65563"
#               protocol: bgp
#               route_map: zone1-bgp-connect
#            router_id: 198.51.100.129
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: "The configuration returned will always be in the same format\n of the parameters above.\n"

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: ["router ospf 102", "router-id 198.54.100.1", "router ospf 100", "router-id 192.0.100.1", "redistribute eigrp 120 route-map rmap_1", "redistribute direct route-map ospf-direct-connect", "area 0.0.0.100 filter-list route-map rmap_1 in", "area 0.0.0.100 filter-list route-map rmap_2 out", "area 0.0.0.100 range 192.0.2.0/24 not-advertise", "area 0.0.0.100 range 192.0.3.0/24 cost 120", "vrf zone1", "router-id 192.0.100.2", "summary-address 10.0.0.0/24 tag 121", "summary-address 11.0.0.0/24", "redistribute static route-map zone1-direct-connect", "vrf zone2", "auto-cost reference-bandwidth 45 Gbps", "capability vrf-lite evpn"]

Authors

  • Nilashish Chakraborty (@NilashishC)