community.crypto.ecs_certificate module – Request SSL/TLS certificates with the Entrust Certificate Services (ECS) API

Note

This module is part of the community.crypto collection (version 2.16.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.crypto. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.crypto.ecs_certificate.

Synopsis

  • Create, reissue, and renew certificates with the Entrust Certificate Services (ECS) API.

  • Requires credentials for the Entrust Certificate Services (ECS) API.

  • In order to request a certificate, the domain and organization used in the certificate signing request must be already validated in the ECS system. It is not the responsibility of this module to perform those steps.

Requirements

The below requirements are needed on the host that executes this module.

  • PyYAML >= 3.11

  • cryptography >= 1.6

Parameters

Parameter

Comments

additional_emails

list / elements=string

A list of additional email addresses to receive the delivery notice and expiry notification for the certificate.

backup

boolean

Whether a backup should be made for the certificate in path.

Choices:

  • false ← (default)

  • true

cert_expiry

string

The date the certificate should be set to expire, in RFC3339 compliant date or date-time format. For example, 2020-02-23, 2020-02-23T15:00:00.05Z.

cert_expiry is only supported for requests of request_type=new or request_type=renew. If request_type=reissue, cert_expiry will be used for the first certificate issuance, but subsequent issuances will have the same expiry as the initial certificate.

A reissued certificate will always have the same expiry as the original certificate.

Note that only the date (day, month, year) is supported for specifying the expiry date. If you choose to specify an expiry time with the expiry date, the time will be adjusted to Eastern Standard Time (EST). This could have the unintended effect of moving your expiry date to the previous day.

Applies only to accounts with a pooling inventory model.

Only one of cert_expiry or cert_lifetime may be specified.

cert_lifetime

string

The lifetime of the certificate.

Applies to all certificates for accounts with a non-pooling inventory model.

cert_lifetime is only supported for requests of request_type=new or request_type=renew. If request_type=reissue, cert_lifetime will be used for the first certificate issuance, but subsequent issuances will have the same expiry as the initial certificate.

Applies to certificates of cert_type=CDS_INDIVIDUAL, CDS_GROUP, CDS_ENT_LITE, CDS_ENT_PRO, or SMIME_ENT for accounts with a pooling inventory model.

P1Y is a certificate with a 1 year lifetime.

P2Y is a certificate with a 2 year lifetime.

P3Y is a certificate with a 3 year lifetime.

Only one of cert_expiry or cert_lifetime may be specified.

Choices:

  • "P1Y"

  • "P2Y"

  • "P3Y"

cert_type

string

Specify the type of certificate requested.

If a certificate is being reissued or renewed, this parameter is ignored, and the cert_type of the initial certificate is used.

Choices:

  • "STANDARD_SSL"

  • "ADVANTAGE_SSL"

  • "UC_SSL"

  • "EV_SSL"

  • "WILDCARD_SSL"

  • "PRIVATE_SSL"

  • "PD_SSL"

  • "CODE_SIGNING"

  • "EV_CODE_SIGNING"

  • "CDS_INDIVIDUAL"

  • "CDS_GROUP"

  • "CDS_ENT_LITE"

  • "CDS_ENT_PRO"

  • "SMIME_ENT"

client_id

integer

The client ID to submit the Certificate Signing Request under.

If no client ID is specified, the certificate will be submitted under the primary client with ID of 1.

When using a client other than the primary client, the org parameter cannot be specified.

The issued certificate will have an organization value in the subject distinguished name represented by the client.

Default: 1

csr

string

Base-64 encoded Certificate Signing Request (CSR). csr is accepted with or without PEM formatting around the Base-64 string.

If no csr is provided when request_type=reissue or request_type=renew, the certificate will be generated with the same public key as the certificate being renewed or reissued.

If subject_alt_name is specified, it will override the subject alternate names in the CSR.

If eku is specified, it will override the extended key usage in the CSR.

If ou is specified, it will override the organizational units “ou=” present in the subject distinguished name of the CSR, if any.

The organization “O=” field from the CSR will not be used. It will be replaced in the issued certificate by org if present, and if not present, the organization tied to client_id.

ct_log

boolean

In compliance with browser requirements, this certificate may be posted to the Certificate Transparency (CT) logs. This is a best practice technique that helps domain owners monitor certificates issued to their domains. Note that not all certificates are eligible for CT logging.

If ct_log is not specified, the certificate uses the account default.

If ct_log is specified and the account settings allow it, ct_log overrides the account default.

If ct_log is set to false, but the account settings are set to “always log”, the certificate generation will fail.

Choices:

  • false

  • true

custom_fields

dictionary

Mapping of custom fields to associate with the certificate request and certificate.

Only supported if custom fields are enabled for your account.

Each custom field specified must be a custom field you have defined for your account.

date1

string

Custom date field.

date2

string

Custom date field.

date3

string

Custom date field.

date4

string

Custom date field.

date5

string

Custom date field.

dropdown1

string

Custom dropdown field.

dropdown2

string

Custom dropdown field.

dropdown3

string

Custom dropdown field.

dropdown4

string

Custom dropdown field.

dropdown5

string

Custom dropdown field.

email1

string

Custom email field.

email2

string

Custom email field.

email3

string

Custom email field.

email4

string

Custom email field.

email5

string

Custom email field.

number1

float

Custom number field.

number2

float

Custom number field.

number3

float

Custom number field.

number4

float

Custom number field.

number5

float

Custom number field.

text1

string

Custom text field (maximum 500 characters)

text10

string

Custom text field (maximum 500 characters)

text11

string

Custom text field (maximum 500 characters)

text12

string

Custom text field (maximum 500 characters)

text13

string

Custom text field (maximum 500 characters)

text14

string

Custom text field (maximum 500 characters)

text15

string

Custom text field (maximum 500 characters)

text2

string

Custom text field (maximum 500 characters)

text3

string

Custom text field (maximum 500 characters)

text4

string

Custom text field (maximum 500 characters)

text5

string

Custom text field (maximum 500 characters)

text6

string

Custom text field (maximum 500 characters)

text7

string

Custom text field (maximum 500 characters)

text8

string

Custom text field (maximum 500 characters)

text9

string

Custom text field (maximum 500 characters)

eku

string

If specified, overrides the key usage in the csr.

Choices:

  • "SERVER_AUTH"

  • "CLIENT_AUTH"

  • "SERVER_AND_CLIENT_AUTH"

end_user_key_storage_agreement

boolean

The end user of the Code Signing certificate must generate and store the private key for this request on cryptographically secure hardware to be compliant with the Entrust CSP and Subscription agreement. If requesting a certificate of type CODE_SIGNING or EV_CODE_SIGNING, you must set end_user_key_storage_agreement to true if and only if you acknowledge that you will inform the user of this requirement.

Applicable only to cert_type of values CODE_SIGNING and EV_CODE_SIGNING.

Choices:

  • false

  • true

entrust_api_client_cert_key_path

path / required

The path to the key for the client certificate used to authenticate to the Entrust Certificate Services (ECS) API.

entrust_api_client_cert_path

path / required

The path to the client certificate used to authenticate to the Entrust Certificate Services (ECS) API.

entrust_api_key

string / required

The key (password) for authentication to the Entrust Certificate Services (ECS) API.

entrust_api_specification_path

path

The path to the specification file defining the Entrust Certificate Services (ECS) API configuration.

You can use this to keep a local copy of the specification to avoid downloading it every time the module is used.

Default: "https://cloud.entrust.net/EntrustCloud/documentation/cms-api-2.1.0.yaml"

entrust_api_user

string / required

The username for authentication to the Entrust Certificate Services (ECS) API.

force

boolean

If force is used, a certificate is requested regardless of whether path points to an existing valid certificate.

If request_type=renew, a forced renew will fail if the certificate being renewed has been issued within the past 30 days, regardless of the value of remaining_days or the return value of cert_days - the ECS API does not support the “renew” operation for certificates that are not at least 30 days old.

Choices:

  • false ← (default)

  • true

full_chain_path

path

The destination path for the full certificate chain of the certificate, intermediates, and roots.

org

string

Organization “O=” to include in the certificate.

If org is not specified, the organization from the client represented by client_id is used.

Unless the cert_type is PD_SSL, this field may not be specified if the value of client_id is not “1” (the primary client). non-primary clients, certificates may only be issued with the organization of that client.

ou

list / elements=string

Organizational unit “OU=” to include in the certificate.

ou behavior is dependent on whether organizational units are enabled for your account. If organizational unit support is disabled for your account, organizational units from the csr and the ou parameter are ignored.

If both csr and ou are specified, the value in ou will override the OU fields present in the subject distinguished name in the csr

If neither csr nor ou are specified for a renew or reissue operation, the OU fields in the initial certificate are reused.

An invalid OU from csr is ignored, but any invalid organizational units in ou will result in an error indicating “Unapproved OU”. The ou parameter can be used to force failure if an unapproved organizational unit is provided.

A maximum of one OU may be specified for current products. Multiple OUs are reserved for future products.

path

path / required

The destination path for the generated certificate as a PEM encoded cert.

If the certificate at this location is not an Entrust issued certificate, a new certificate will always be requested even if the current certificate is technically valid.

If there is already an Entrust certificate at this location, whether it is replaced is depends on the remaining_days calculation.

If an existing certificate is being replaced (see remaining_days, force, and tracking_id), whether a new certificate is requested or the existing certificate is renewed or reissued is based on request_type.

remaining_days

integer

The number of days the certificate must have left being valid. If cert_days < remaining_days then a new certificate will be obtained using request_type.

If request_type=renew, a renewal will fail if the certificate being renewed has been issued within the past 30 days, so do not set a remaining_days value that is within 30 days of the full lifetime of the certificate being acted upon.

For example, if you are requesting Certificates with a 90 day lifetime, do not set remaining_days to a value 60 or higher).

The force option may be used to ensure that a new certificate is always obtained.

Default: 30

request_type

string

The operation performed if tracking_id references a valid certificate to reissue, or there is already a certificate present in path but either force is specified or cert_days < remaining_days.

Specifying request_type=validate_only means the request will be validated against the ECS API, but no certificate will be issued.

Specifying request_type=new means a certificate request will always be submitted and a new certificate issued.

Specifying request_type=renew means that an existing certificate (specified by tracking_id if present, otherwise path) will be renewed. If there is no certificate to renew, a new certificate is requested.

Specifying request_type=reissue means that an existing certificate (specified by tracking_id if present, otherwise path) will be reissued. If there is no certificate to reissue, a new certificate is requested.

If a certificate was issued within the past 30 days, the renew operation is not a valid operation and will fail.

Note that reissue is an operation that will result in the revocation of the certificate that is reissued, be cautious with its use.

check_mode is only supported if request_type=new

For example, setting request_type=renew and remaining_days=30 and pointing to the same certificate on multiple playbook runs means that on the first run new certificate will be requested. It will then be left along on future runs until it is within 30 days of expiry, then the ECS “renew” operation will be performed.

Choices:

  • "new" ← (default)

  • "renew"

  • "reissue"

  • "validate_only"

requester_email

string / required

The requester email to associate with certificate tracking information and receive delivery and expiry notices for the certificate.

requester_name

string / required

The requester name to associate with certificate tracking information.

requester_phone

string / required

The requester phone number to associate with certificate tracking information.

subject_alt_name

list / elements=string

The subject alternative name identifiers, as an array of values (applies to cert_type with a value of STANDARD_SSL, ADVANTAGE_SSL, UC_SSL, EV_SSL, WILDCARD_SSL, PRIVATE_SSL, and PD_SSL).

If you are requesting a new SSL certificate, and you pass a subject_alt_name parameter, any SAN names in the CSR are ignored. If no subjectAltName parameter is passed, the SAN names in the CSR are used.

See request_type to understand more about SANs during reissues and renewals.

In the case of certificates of type STANDARD_SSL certificates, if the CN of the certificate is <domain>.<tld> only the www.<domain>.<tld> value is accepted. If the CN of the certificate is www.<domain>.<tld> only the <domain>.<tld> value is accepted.

tracking_id

integer

The tracking ID of the certificate to reissue or renew.

tracking_id is invalid if request_type=new or request_type=validate_only.

If there is a certificate present in path and it is an ECS certificate, tracking_id will be ignored.

If there is no certificate present in path or there is but it is from another provider, the certificate represented by tracking_id will be renewed or reissued and saved to path.

If there is no certificate present in path and the force and remaining_days parameters do not indicate a new certificate is needed, the certificate referenced by tracking_id certificate will be saved to path.

This can be used when a known certificate is not currently present on a server, but you want to renew or reissue it to be managed by an ansible playbook. For example, if you specify request_type=renew, tracking_id of an issued certificate, and path to a file that does not exist, the first run of a task will download the certificate specified by tracking_id (assuming it is still valid). Future runs of the task will (if applicable - see force and remaining_days) renew the certificate now present in path.

tracking_info

string

Free form tracking information to attach to the record for the certificate.

Attributes

Attribute

Support

Description

check_mode

Support: partial

Check mode is only supported if request_type=new.

Can run in check_mode and return changed status prediction without modifying target.

diff_mode

Support: none

Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

safe_file_operations

Support: full

Uses Ansible’s strict file operation functions to ensure proper permissions and avoid data corruption.

Notes

Note

  • path must be specified as the output location of the certificate.

See Also

See also

community.crypto.openssl_privatekey

Can be used to create private keys (both for certificates and accounts).

community.crypto.openssl_csr

Can be used to create a Certificate Signing Request (CSR).

Examples

- name: Request a new certificate from Entrust with bare minimum parameters.
        Will request a new certificate if current one is valid but within 30
        days of expiry. If replacing an existing file in path, will back it up.
  community.crypto.ecs_certificate:
    backup: true
    path: /etc/ssl/crt/ansible.com.crt
    full_chain_path: /etc/ssl/crt/ansible.com.chain.crt
    csr: /etc/ssl/csr/ansible.com.csr
    cert_type: EV_SSL
    requester_name: Jo Doe
    requester_email: [email protected]
    requester_phone: 555-555-5555
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

- name: If there is no certificate present in path, request a new certificate
        of type EV_SSL. Otherwise, if there is an Entrust managed certificate
        in path and it is within 63 days of expiration, request a renew of that
        certificate.
  community.crypto.ecs_certificate:
    path: /etc/ssl/crt/ansible.com.crt
    csr: /etc/ssl/csr/ansible.com.csr
    cert_type: EV_SSL
    cert_expiry: '2020-08-20'
    request_type: renew
    remaining_days: 63
    requester_name: Jo Doe
    requester_email: [email protected]
    requester_phone: 555-555-5555
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

- name: If there is no certificate present in path, download certificate
        specified by tracking_id if it is still valid. Otherwise, if the
        certificate is within 79 days of expiration, request a renew of that
        certificate and save it in path. This can be used to "migrate" a
        certificate to be Ansible managed.
  community.crypto.ecs_certificate:
    path: /etc/ssl/crt/ansible.com.crt
    csr: /etc/ssl/csr/ansible.com.csr
    tracking_id: 2378915
    request_type: renew
    remaining_days: 79
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

- name: Force a reissue of the certificate specified by tracking_id.
  community.crypto.ecs_certificate:
    path: /etc/ssl/crt/ansible.com.crt
    force: true
    tracking_id: 2378915
    request_type: reissue
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

- name: Request a new certificate with an alternative client. Note that the
        issued certificate will have it's Subject Distinguished Name use the
        organization details associated with that client, rather than what is
        in the CSR.
  community.crypto.ecs_certificate:
    path: /etc/ssl/crt/ansible.com.crt
    csr: /etc/ssl/csr/ansible.com.csr
    client_id: 2
    requester_name: Jo Doe
    requester_email: [email protected]
    requester_phone: 555-555-5555
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

- name: Request a new certificate with a number of CSR parameters overridden
        and tracking information
  community.crypto.ecs_certificate:
    path: /etc/ssl/crt/ansible.com.crt
    full_chain_path: /etc/ssl/crt/ansible.com.chain.crt
    csr: /etc/ssl/csr/ansible.com.csr
    subject_alt_name:
      - ansible.testcertificates.com
      - www.testcertificates.com
    eku: SERVER_AND_CLIENT_AUTH
    ct_log: true
    org: Test Organization Inc.
    ou:
      - Administration
    tracking_info: "Submitted via Ansible"
    additional_emails:
      - [email protected]
      - [email protected]
    custom_fields:
      text1: Admin
      text2: Invoice 25
      number1: 342
      date1: '2018-01-01'
      email1: [email protected]
      dropdown1: red
    cert_expiry: '2020-08-15'
    requester_name: Jo Doe
    requester_email: [email protected]
    requester_phone: 555-555-5555
    entrust_api_user: apiusername
    entrust_api_key: a^lv*32!cd9LnT
    entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
    entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-client.key

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

backup_file

string

Name of backup file created for the certificate.

Returned: changed and if backup is true

Sample: "/path/to/www.ansible.com.crt.2019-03-09@11:22~"

backup_full_chain_file

string

Name of the backup file created for the certificate chain.

Returned: changed and if backup is true and full_chain_path is set.

Sample: "/path/to/ca.chain.crt.2019-03-09@11:22~"

cert_days

integer

The number of days the certificate remains valid.

Returned: success

Sample: 253

cert_details

dictionary

The full response JSON from the Get Certificate call of the ECS API.

While the response contents are guaranteed to be forwards compatible with new ECS API releases, Entrust recommends that you do not make any playbooks take actions based on the content of this field. However it may be useful for debugging, logging, or auditing purposes.

Returned: success

cert_status

string

The certificate status in ECS.

Current possible values (which may be expanded in the future) are: ACTIVE, APPROVED, DEACTIVATED, DECLINED, EXPIRED, NA, PENDING, PENDING_QUORUM, READY, REISSUED, REISSUING, RENEWED, RENEWING, REVOKED, SUSPENDED

Returned: success

Sample: "ACTIVE"

filename

string

The destination path for the generated certificate.

Returned: changed or success

Sample: "/etc/ssl/crt/www.ansible.com.crt"

serial_number

integer

The serial number of the issued certificate.

Returned: success

Sample: 1235262234164342

tracking_id

integer

The tracking ID to reference and track the certificate in ECS.

Returned: success

Sample: 380079

Authors

  • Chris Trufan (@ctrufan)