community.docker.docker_node module – Manage Docker Swarm node

Note

This module is part of the community.docker collection (version 3.4.11).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.docker. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.docker.docker_node.

Synopsis

  • Manages the Docker nodes via Swarm Manager.

  • This module allows to change the node’s role, its availability, and to modify, add or remove node labels.

Requirements

The below requirements are needed on the host that executes this module.

  • Docker API >= 1.25

  • Docker SDK for Python: Please note that the docker-py Python module has been superseded by docker (see here for details). Note that both modules should *not* be installed at the same time. Also note that when both modules are installed and one of them is uninstalled, the other might no longer function and a reinstall of it is required.

  • Docker SDK for Python >= 2.4.0

Parameters

Parameter

Comments

api_version

aliases: docker_api_version

string

The version of the Docker API running on the Docker Host.

Defaults to the latest version of the API supported by Docker SDK for Python and the docker daemon.

If the value is not specified in the task, the value of environment variable DOCKER_API_VERSION will be used instead. If the environment variable is not set, the default value will be used.

Default: "auto"

availability

string

Node availability to assign. If not provided then node availability remains unchanged.

Choices:

  • "active"

  • "pause"

  • "drain"

ca_cert

aliases: tls_ca_cert, cacert_path

path

Use a CA certificate when performing server verification by providing the path to a CA certificate file.

If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file ca.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

client_cert

aliases: tls_client_cert, cert_path

path

Path to the client’s TLS certificate file.

If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file cert.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

client_key

aliases: tls_client_key, key_path

path

Path to the client’s TLS key file.

If the value is not specified in the task and the environment variable DOCKER_CERT_PATH is set, the file key.pem from the directory specified in the environment variable DOCKER_CERT_PATH will be used.

debug

boolean

Debug mode

Choices:

  • false ← (default)

  • true

docker_host

aliases: docker_url

string

The URL or Unix socket path used to connect to the Docker API. To connect to a remote host, provide the TCP connection string. For example, tcp://192.0.2.23:2376. If TLS is used to encrypt the connection, the module will automatically replace tcp in the connection URL with https.

If the value is not specified in the task, the value of environment variable DOCKER_HOST will be used instead. If the environment variable is not set, the default value will be used.

Default: "unix://var/run/docker.sock"

hostname

string / required

The hostname or ID of node as registered in Swarm.

If more than one node is registered using the same hostname the ID must be used, otherwise module will fail.

labels

dictionary

User-defined key/value metadata that will be assigned as node attribute.

Label operations in this module apply to the docker swarm node specified by hostname. Use community.docker.docker_swarm module to add/modify/remove swarm cluster labels.

The actual state of labels assigned to the node when module completes its work depends on labels_state and labels_to_remove parameters values. See description below.

labels_state

string

It defines the operation on the labels assigned to node and labels specified in labels option.

Set to merge to combine labels provided in labels with those already assigned to the node. If no labels are assigned then it will add listed labels. For labels that are already assigned to the node, it will update their values. The labels not specified in labels will remain unchanged. If labels is empty then no changes will be made.

Set to replace to replace all assigned labels with provided ones. If labels is empty then all labels assigned to the node will be removed.

Choices:

  • "merge" ← (default)

  • "replace"

labels_to_remove

list / elements=string

List of labels that will be removed from the node configuration. The list has to contain only label names, not their values.

If the label provided on the list is not assigned to the node, the entry is ignored.

If the label is both on the labels_to_remove and labels, then value provided in labels remains assigned to the node.

If labels_state=replace and labels is not provided or empty then all labels assigned to node are removed and labels_to_remove is ignored.

role

string

Node role to assign. If not provided then node role remains unchanged.

Choices:

  • "manager"

  • "worker"

ssl_version

string

Provide a valid SSL version number. Default value determined by SSL Python module.

If the value is not specified in the task, the value of environment variable DOCKER_SSL_VERSION will be used instead.

timeout

integer

The maximum amount of time in seconds to wait on a response from the API.

If the value is not specified in the task, the value of environment variable DOCKER_TIMEOUT will be used instead. If the environment variable is not set, the default value will be used.

Default: 60

tls

boolean

Secure the connection to the API by using TLS without verifying the authenticity of the Docker host server. Note that if validate_certs is set to true as well, it will take precedence.

If the value is not specified in the task, the value of environment variable DOCKER_TLS will be used instead. If the environment variable is not set, the default value will be used.

Choices:

  • false ← (default)

  • true

tls_hostname

string

When verifying the authenticity of the Docker Host server, provide the expected name of the server.

If the value is not specified in the task, the value of environment variable DOCKER_TLS_HOSTNAME will be used instead. If the environment variable is not set, the default value will be used.

Note that this option had a default value localhost in older versions. It was removed in community.docker 3.0.0.

use_ssh_client

boolean

added in community.docker 1.5.0

For SSH transports, use the ssh CLI tool instead of paramiko.

Requires Docker SDK for Python 4.4.0 or newer.

Choices:

  • false ← (default)

  • true

validate_certs

aliases: tls_verify

boolean

Secure the connection to the API by using TLS and verifying the authenticity of the Docker host server.

If the value is not specified in the task, the value of environment variable DOCKER_TLS_VERIFY will be used instead. If the environment variable is not set, the default value will be used.

Choices:

  • false ← (default)

  • true

Attributes

Attribute

Support

Description

action_group

Action groups: community.docker.docker, docker

Use group/docker or group/community.docker.docker in module_defaults to set defaults for this module.

check_mode

Support: full

Can run in check_mode and return changed status prediction without modifying target.

diff_mode

Support: none

Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Notes

Note

  • Connect to the Docker daemon by providing parameters with each task or by defining environment variables. You can define DOCKER_HOST, DOCKER_TLS_HOSTNAME, DOCKER_API_VERSION, DOCKER_CERT_PATH, DOCKER_SSL_VERSION, DOCKER_TLS, DOCKER_TLS_VERIFY and DOCKER_TIMEOUT. If you are using docker machine, run the script shipped with the product that sets up the environment. It will set these variables for you. See https://docs.docker.com/machine/reference/env/ for more details.

  • When connecting to Docker daemon with TLS, you might need to install additional Python packages. For the Docker SDK for Python, version 2.4 or newer, this can be done by installing docker[tls] with ansible.builtin.pip.

  • Note that the Docker SDK for Python only allows to specify the path to the Docker configuration for very few functions. In general, it will use $HOME/.docker/config.json if the DOCKER_CONFIG environment variable is not specified, and use $DOCKER_CONFIG/config.json otherwise.

  • This module uses the Docker SDK for Python to communicate with the Docker daemon.

Examples

- name: Set node role
  community.docker.docker_node:
    hostname: mynode
    role: manager

- name: Set node availability
  community.docker.docker_node:
    hostname: mynode
    availability: drain

- name: Replace node labels with new labels
  community.docker.docker_node:
    hostname: mynode
    labels:
      key: value
    labels_state: replace

- name: Merge node labels and new labels
  community.docker.docker_node:
    hostname: mynode
    labels:
      key: value

- name: Remove all labels assigned to node
  community.docker.docker_node:
    hostname: mynode
    labels_state: replace

- name: Remove selected labels from the node
  community.docker.docker_node:
    hostname: mynode
    labels_to_remove:
      - key1
      - key2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

node

dictionary

Information about node after ‘update’ operation

Returned: success

Authors

  • Piotr Wojciechowski (@WojciechowskiPiotr)

  • Thierry Bouvet (@tbouvet)