You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.fortios.fmgr_fwobj_address module – Allows the management of firewall objects in FortiManager

Note

This module is part of the community.fortios collection (version 1.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.fortios.

To use it in a playbook, specify: community.fortios.fmgr_fwobj_address.

Synopsis

• Allows for the management of IPv4, IPv6, and multicast address objects within FortiManager.

Parameters

Parameter	Comments
adom string	The ADOM the configuration should belong to. Default: "root"
allow_routing string	Enable/disable use of this address in the static route configuration. Choices: "enable" "disable" ← (default)
associated_interface string	Associated interface name.
cache_ttl string	Minimal TTL of individual IP addresses in FQDN cache. Only applies when type = wildcard-fqdn.
color string	Color of the object in FortiManager GUI. Takes integers 1-32 Default: 22
comment string	Comment for the object in FortiManager.
country string	Country name. Required if type = geographic.
end_ip string	End IP. Only used when ipv4 = iprange.
fqdn string	Fully qualified domain name.
group_members string	Address group member. If this is defined w/out group_name, the operation will fail.
group_name string	Address group name. If this is defined in playbook task, all other options are ignored.
ipv4 string	Type of IPv4 Object. Must not be specified with either multicast or IPv6 parameters. Choices: "ipmask" "iprange" "fqdn" "wildcard" "geography" "wildcard-fqdn" "group"
ipv4addr string	IP and network mask. If only defining one IP use this parameter. (i.e. 10.7.220.30/255.255.255.255) Can also define subnets (i.e. 10.7.220.0/255.255.255.0) Also accepts CIDR (i.e. 10.7.220.0/24) If Netmask is omitted after IP address, /32 is assumed. When multicast is set to Broadcast Subnet the ipv4addr parameter is used to specify the subnet.
ipv6 string	Puts module into IPv6 mode. Must not be specified with either ipv4 or multicast parameters. Choices: "ip" "iprange" "group"
ipv6addr string	IPv6 address in full. (i.e. 2001:0db8:85a3:0000:0000:8a2e:0370:7334)
mode string	Sets one of three modes for managing the object. Choices: "add" ← (default) "set" "delete"
multicast string	Manages Multicast Address Objects. Sets either a Multicast IP Range or a Broadcast Subnet. Must not be specified with either ipv4 or ipv6 parameters. When set to Broadcast Subnet the ipv4addr parameter is used to specify the subnet. Can create IPv4 Multicast Objects (multicastrange and broadcastmask options – uses start/end-ip and ipv4addr). Choices: "multicastrange" "broadcastmask" "ip6"
name string	Friendly Name Address object name in FortiManager.
obj_id string	Object ID for NSX.
start_ip string	Start IP. Only used when ipv4 = iprange.
visibility string	Enable/disable address visibility. Choices: "enable" ← (default) "disable"
wildcard string	IP address and wildcard netmask. Required if ipv4 = wildcard.
wildcard_fqdn string	Wildcard FQDN. Required if ipv4 = wildcard-fqdn.

Notes

Note

• Full Documentation at https://ftnt-ansible-docs.readthedocs.io/en/latest/.

Examples

- name: ADD IPv4 IP ADDRESS OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.30/32"
    name: "ansible_v4Obj"
    comment: "Created by Ansible"
    color: "6"

- name: ADD IPv4 IP ADDRESS OBJECT MORE OPTIONS
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.34/32"
    name: "ansible_v4Obj_MORE"
    comment: "Created by Ansible"
    color: "6"
    allow_routing: "enable"
    cache_ttl: "180"
    associated_interface: "port1"
    obj_id: "123"

- name: ADD IPv4 IP ADDRESS SUBNET OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "ipmask"
    ipv4addr: "10.7.220.0/255.255.255.128"
    name: "ansible_subnet"
    comment: "Created by Ansible"
    mode: "set"

- name: ADD IPv4 IP ADDRESS RANGE OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "iprange"
    start_ip: "10.7.220.1"
    end_ip: "10.7.220.125"
    name: "ansible_range"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS WILDCARD OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "wildcard"
    wildcard: "10.7.220.30/255.255.255.255"
    name: "ansible_wildcard"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS WILDCARD FQDN OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "wildcard-fqdn"
    wildcard_fqdn: "*.myds.com"
    name: "Synology myds DDNS service"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS FQDN OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "fqdn"
    fqdn: "ansible.com"
    name: "ansible_fqdn"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS GEO OBJECT
  community.fortios.fmgr_fwobj_address:
    ipv4: "geography"
    country: "usa"
    name: "ansible_geo"
    comment: "Created by Ansible"

- name: ADD IPv6 ADDRESS
  community.fortios.fmgr_fwobj_address:
    ipv6: "ip"
    ipv6addr: "2001:0db8:85a3:0000:0000:8a2e:0370:7334"
    name: "ansible_v6Obj"
    comment: "Created by Ansible"

- name: ADD IPv6 ADDRESS RANGE
  community.fortios.fmgr_fwobj_address:
    ipv6: "iprange"
    start_ip: "2001:0db8:85a3:0000:0000:8a2e:0370:7334"
    end_ip: "2001:0db8:85a3:0000:0000:8a2e:0370:7446"
    name: "ansible_v6range"
    comment: "Created by Ansible"

- name: ADD IPv4 IP ADDRESS GROUP
  community.fortios.fmgr_fwobj_address:
    ipv4: "group"
    group_name: "ansibleIPv4Group"
    group_members: "ansible_fqdn, ansible_wildcard, ansible_range"

- name: ADD IPv6 IP ADDRESS GROUP
  community.fortios.fmgr_fwobj_address:
    ipv6: "group"
    group_name: "ansibleIPv6Group"
    group_members: "ansible_v6Obj, ansible_v6range"

- name: ADD MULTICAST RANGE
  community.fortios.fmgr_fwobj_address:
    multicast: "multicastrange"
    start_ip: "224.0.0.251"
    end_ip: "224.0.0.251"
    name: "ansible_multicastrange"
    comment: "Created by Ansible"

- name: ADD BROADCAST SUBNET
  community.fortios.fmgr_fwobj_address:
    multicast: "broadcastmask"
    ipv4addr: "10.7.220.0/24"
    name: "ansible_broadcastSubnet"
    comment: "Created by Ansible"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
api_result string	full API response, includes status code and message Returned: always

Authors

• Luke Weighall (@lweighall)

• Andrew Welsh (@Ghilli3)

• Jim Huber (@p4r4n0y1ng)

Collection links

• Issue Tracker
• Repository (Sources)