community.network.ce_ospf_vrf module – Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Note

This module is part of the community.network collection (version 5.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.ce_ospf_vrf.

Synopsis

  • Manages configuration of an OSPF VPN instance on HUAWEI CloudEngine switches.

Aliases: network.cloudengine.ce_ospf_vrf

Parameters

Parameter

Comments

bandwidth

string

Specifies the reference bandwidth used to assign ospf cost. Valid values are an integer, in Mbps, 1 - 2147483648, the default value is 100.

description

string

Specifies the description information of ospf process.

lsaaholdinterval

string

Specifies the hold interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.

lsaainterval

string

Specifies the interval of arrive LSA when use the general timer. Valid value is an integer, in millisecond, from 0 to 10000.

lsaalflag

boolean

Specifies the mode of timer to calculate interval of arrive LSA. If set the parameter but not specifies value, the default will be used. If true use general timer. If false use intelligent timer.

Choices:

  • false ← (default)

  • true

lsaamaxinterval

string

Specifies the max interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 1000.

lsaastartinterval

string

Specifies the start interval of arrive LSA when use the intelligent timer. Valid value is an integer, in millisecond, from 0 to 10000, the default value is 500.

lsaoholdinterval

string

Specifies the hold interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 5000, the default value is 1000.

lsaointerval

string

Specifies the interval of originate LSA . Valid value is an integer, in second, from 0 to 10, the default value is 5.

lsaointervalflag

boolean

Specifies whether cancel the interval of LSA originate or not. If set the parameter but noe specifies value, the default will be used. true:cancel the interval of LSA originate, the interval is 0. false:do not cancel the interval of LSA originate.

Choices:

  • false ← (default)

  • true

lsaomaxinterval

string

Specifies the max interval of originate LSA . Valid value is an integer, in millisecond, from 1 to 10000, the default value is 5000.

lsaostartinterval

string

Specifies the start interval of originate LSA . Valid value is an integer, in millisecond, from 0 to 1000, the default value is 500.

ospf

string / required

The ID of the ospf process. Valid values are an integer, 1 - 4294967295, the default value is 1.

route_id

string

Specifies the ospf private route id,. Valid values are a string, formatted as an IP address (i.e. “10.1.1.1”) the length is 0 - 20.

spfholdinterval

string

Specifies the hold interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 5000, the default value is 200.

spfinterval

string

Specifies the interval to calculate SPF when use second level timer. Valid value is an integer, in second, from 1 to 10.

spfintervalmi

string

Specifies the interval to calculate SPF when use millisecond level timer. Valid value is an integer, in millisecond, from 1 to 10000.

spfintervaltype

string

Specifies the mode of timer which used to calculate SPF. If set the parameter but noe specifies value, the default will be used. If is intelligent-timer, then use intelligent timer. If is timer, then use second level timer. If is millisecond, then use millisecond level timer.

Choices:

  • "intelligent-timer" ← (default)

  • "timer"

  • "millisecond"

spfmaxinterval

string

Specifies the max interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 20000, the default value is 5000.

spfstartinterval

string

Specifies the start interval to calculate SPF when use intelligent timer. Valid value is an integer, in millisecond, from 1 to 1000, the default value is 50.

state

string

Specify desired state of the resource.

Choices:

  • "present" ← (default)

  • "absent"

vrf

string

Specifies the vpn instance which use ospf,length is 1 - 31. Valid values are a string.

Default: "_public_"

Notes

Note

  • This module requires the netconf system service be enabled on the remote device being managed.

  • Recommended connection is netconf.

  • This module also works with local connections for legacy playbooks.

Examples

- name: Ospf vrf module test
  hosts: cloudengine
  connection: local
  gather_facts: false

  tasks:

  - name: Configure ospf route id
    community.network.ce_ospf_vrf:
      ospf: 2
      route_id: 2.2.2.2
      lsaointervalflag: false
      lsaointerval: 2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

changed

boolean

check to see if a change was made on the device

Returned: always

Sample: false

end_state

dictionary

k/v pairs of configuration after module execution

Returned: verbose mode

Sample: {"bandwidthReference": "100", "description": null, "lsaArrivalFlag": "false", "lsaArrivalHoldInterval": "500", "lsaArrivalInterval": null, "lsaArrivalMaxInterval": "1000", "lsaArrivalStartInterval": "500", "lsaOriginateHoldInterval": "1000", "lsaOriginateInterval": "2", "lsaOriginateIntervalFlag": "false", "lsaOriginateMaxInterval": "5000", "lsaOriginateStartInterval": "500", "processId": "2", "routerId": "2.2.2.2", "spfScheduleHoldInterval": "1000", "spfScheduleInterval": null, "spfScheduleIntervalMillisecond": null, "spfScheduleIntervalType": "intelligent-timer", "spfScheduleMaxInterval": "10000", "spfScheduleStartInterval": "500", "vrfName": "_public_"}

existing

dictionary

k/v pairs of existing configuration

Returned: verbose mode

Sample: {"bandwidthReference": "100", "description": null, "lsaArrivalFlag": "false", "lsaArrivalHoldInterval": "500", "lsaArrivalInterval": null, "lsaArrivalMaxInterval": "1000", "lsaArrivalStartInterval": "500", "lsaOriginateHoldInterval": "1000", "lsaOriginateInterval": "2", "lsaOriginateIntervalFlag": "false", "lsaOriginateMaxInterval": "5000", "lsaOriginateStartInterval": "500", "processId": "2", "routerId": "2.2.2.2", "spfScheduleHoldInterval": "1000", "spfScheduleInterval": null, "spfScheduleIntervalMillisecond": null, "spfScheduleIntervalType": "intelligent-timer", "spfScheduleMaxInterval": "10000", "spfScheduleStartInterval": "500", "vrfName": "_public_"}

proposed

dictionary

k/v pairs of parameters passed into module

Returned: verbose mode

Sample: {"bandwidth": "100", "description": null, "lsaaholdinterval": "500", "lsaainterval": null, "lsaalflag": "False", "lsaamaxinterval": "1000", "lsaastartinterval": "500", "lsaoholdinterval": "1000", "lsaointerval": "2", "lsaointervalflag": "False", "lsaomaxinterval": "5000", "lsaostartinterval": "500", "process_id": "2", "route_id": "2.2.2.2", "spfholdinterval": "1000", "spfinterval": null, "spfintervalmi": null, "spfintervaltype": "intelligent-timer", "spfmaxinterval": "10000", "spfstartinterval": "500", "vrf": "_public_"}

updates

list / elements=string

commands sent to the device

Returned: always

Sample: ["ospf 2"]

Authors

  • Yang yang (@QijunPan)