You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

community.network.icx_vlan module – Manage VLANs on Ruckus ICX 7000 series switches

Note

This module is part of the community.network collection (version 5.0.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.icx_vlan.

Synopsis 

This module provides declarative management of VLANs on ICX network devices.

Aliases: network.icx.icx_vlan

Parameters 

Parameter	Comments
aggregate list / elements=string	List of VLANs definitions.
associated_interfaces list / elements=string	This is a intent option and checks the operational state of the for given vlan `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vlan interfaces on device it will result in failure.
associated_tagged list / elements=string	This is a intent option and checks the operational state of given vlan `name` for associated tagged ports and lags. If the value in the `associated_tagged` does not match with the operational state of vlan interfaces on device it will result in failure.
check_running_config boolean	Check running configuration. This can be set as environment variable. Module will use environment variable value(default:True), unless it is overridden, by specifying it as module parameter. Choices: `false` `true`
delay integer	Delay the play should wait to check for declarative intent params values.
interfaces dictionary	List of ethernet ports or LAGS to be added as access(untagged) ports to the vlan. To add a range of ports use ‘to’ keyword. See the example.
name list / elements=string	Name of the interface or lag
purge boolean	Purge interfaces not defined in the name Choices: `false` `true`
ip_arp_inspection boolean	Enables dynamic ARP inspection on a VLAN. Choices: `false` `true`
ip_dhcp_snooping boolean	Enables DHCP snooping on a VLAN. Choices: `false` `true`
name string	Name of the VLAN.
state string	State of the VLAN configuration. Choices: `"present"` `"absent"`
stp dictionary	Enable spanning-tree 802-1w/rstp for this vlan.
enabled boolean	Manage the state(Enable/Disable) of the spanning_tree_802_1w in the current vlan Choices: `false` `true`
priority string	Configures the priority of the bridge. The value ranges from 0 through 65535. A lower numerical value means the bridge has a higher priority. Thus, the highest priority is 0. The default is 32768.
type string	Specify the type of spanning-tree Choices: `"802-1w"` ← (default) `"rstp"`
tagged dictionary	List of ethernet ports or LAGS to be added as trunk(tagged) ports to the vlan. To add a range of ports use ‘to’ keyword. See the example.
name list / elements=string	Name of the interface or lag
purge boolean	Purge interfaces not defined in the name Choices: `false` `true`
vlan_id string / required	ID of the VLAN. Range 1-4094.
associated_interfaces list / elements=string	This is a intent option and checks the operational state of the for given vlan `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vlan interfaces on device it will result in failure.
associated_tagged list / elements=string	This is a intent option and checks the operational state of given vlan `name` for associated tagged ports and lags. If the value in the `associated_tagged` does not match with the operational state of vlan interfaces on device it will result in failure.
check_running_config boolean	Check running configuration. This can be set as environment variable. Module will use environment variable value(default:True), unless it is overridden, by specifying it as module parameter. Choices: `false` `true` ← (default)
delay integer	Delay the play should wait to check for declarative intent params values. Default: `10`
interfaces dictionary	List of ethernet ports or LAGS to be added as access(untagged) ports to the vlan. To add a range of ports use ‘to’ keyword. See the example.
name list / elements=string	Name of the interface or lag
purge boolean	Purge interfaces not defined in the name Choices: `false` `true`
ip_arp_inspection boolean	Enables dynamic ARP inspection on a VLAN. Choices: `false` `true`
ip_dhcp_snooping boolean	Enables DHCP snooping on a VLAN. Choices: `false` `true`
name string	Name of the VLAN.
purge boolean	Purge VLANs not defined in the aggregate parameter. Choices: `false` ← (default) `true`
state string	State of the VLAN configuration. Choices: `"present"` ← (default) `"absent"`
stp dictionary	Enable spanning-tree 802-1w/rstp for this vlan.
enabled boolean	Manage the state(Enable/Disable) of the spanning_tree_802_1w in the current vlan Choices: `false` `true`
priority string	Configures the priority of the bridge. The value ranges from 0 through 65535. A lower numerical value means the bridge has a higher priority. Thus, the highest priority is 0. The default is 32768.
type string	Specify the type of spanning-tree Choices: `"802-1w"` ← (default) `"rstp"`
tagged dictionary	List of ethernet ports or LAGS to be added as trunk(tagged) ports to the vlan. To add a range of ports use ‘to’ keyword. See the example.
name list / elements=string	Name of the interface or lag
purge boolean	Purge interfaces not defined in the name Choices: `false` `true`
vlan_id integer / required	ID of the VLAN. Range 1-4094.

Notes 

Note

Tested against ICX 10.1.
For information on using ICX platform, see the ICX OS Platform Options guide.

Examples 

- name: Add a single ethernet 1/1/48 as access(untagged) port to vlan 20
  community.network.icx_vlan:
    name: test-vlan
    vlan_id: 20
    interfaces:
      name:
        - ethernet 1/1/48

- name: Add a single LAG 10 as access(untagged) port to vlan 20
  community.network.icx_vlan:
    vlan_id: 20
    interfaces:
      name:
        - lag 10

- name: Add a range of ethernet ports as trunk(tagged) ports to vlan 20 by port
  community.network.icx_vlan:
    vlan_id: 20
    tagged:
      name:
        - ethernet 1/1/40 to 1/1/48

- name: Add discontinuous lags, ethernet ports as access(untagged) and trunk(tagged) port to vlan 20.
  community.network.icx_vlan:
    vlan_id: 20
    interfaces:
      name:
        - ethernet 1/1/40 to 1/1/48
        - ethernet 2/1/1
        - lag 1
        - lag 3 to 5
    tagged:
      name:
        - ethernet 1/1/20 to 1/1/25
        - lag 1 to 3

- name: Remove an access and range of trunk ports from vlan
  community.network.icx_vlan:
    vlan_id: 20
    interfaces:
      name:
        - ethernet 1/1/40
    tagged:
      name:
        - ethernet 1/1/39 to 1/1/70

- name: Enable dhcp snooping, disable arp inspection in vlan
  community.network.icx_vlan:
    vlan_id: 20
    ip_dhcp_snooping: present
    ip_arp_inspection: absent

- name: Create vlan 20.  Enable  arp inspection in vlan. Purge all other vlans.
  community.network.icx_vlan:
    vlan_id: 20
    ip_arp_inspection: present
    purge: present

- name: Remove vlan 20.
  community.network.icx_vlan:
    vlan_id: 20
    state: absent

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
commands list / elements=string	The list of configuration mode commands to send to the device Returned: always Sample: `["vlan 100", "name test-vlan"]`

Authors

Ruckus Wireless (@Commscope)

community.network.icx_vlan module – Manage VLANs on Ruckus ICX 7000 series switches

Synopsis

Parameters

Notes

Examples

Return Values