You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

dellemc.enterprise_sonic.sonic_bfd module – Manage BFD configuration on SONiC

Note

This module is part of the dellemc.enterprise_sonic collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_bfd.

New in dellemc.enterprise_sonic 2.1.0

Synopsis 

This module provides configuration management of BFD for devices running SONiC

Parameters 

Parameter	Comments
config dictionary	Specifies BFD configurations
multi_hops list / elements=dictionary	List of multi-hop sessions
detect_multiplier integer	Number of missed packets to bring down a BFD session Default: `3`
enabled boolean	Enables BFD session when set to true Choices: `false` `true` ← (default)
local_address string / required	Source IP address to be used for BFD sessions over the interface
min_ttl integer	Minimum expected TTL on received packets Default: `254`
passive_mode boolean	Specifies BFD peer as passive when set to true Choices: `false` ← (default) `true`
profile_name string	BFD profile name
receive_interval integer	Specifies peer receive interval Default: `300`
remote_address string / required	IP address used by the remote system for the BFD session
transmit_interval integer	Specifies peer transmit interval Default: `300`
vrf string / required	Name of the configured VRF on the device
profiles list / elements=dictionary	List of preconfiguration profiles
detect_multiplier integer	Number of missed packets to bring down a BFD session Default: `3`
echo_interval integer	Specifies echo interval Default: `300`
echo_mode boolean	Echo mode is enabled when set to true Choices: `false` ← (default) `true`
enabled boolean	Enables BFD session when set to true Choices: `false` `true` ← (default)
min_ttl integer	Minimum expected TTL on received packets Default: `254`
passive_mode boolean	Specifies BFD peer as passive when set to true Choices: `false` ← (default) `true`
profile_name string / required	BFD profile name
receive_interval integer	Specifies peer receive interval Default: `300`
transmit_interval integer	Specifies peer transmit interval Default: `300`
single_hops list / elements=dictionary	List of single-hop sessions
detect_multiplier integer	Number of missed packets to bring down a BFD session Default: `3`
echo_interval integer	Specifies echo interval Default: `300`
echo_mode boolean	Echo mode is enabled when set to true Choices: `false` ← (default) `true`
enabled boolean	Enables BFD session when set to true Choices: `false` `true` ← (default)
interface string / required	Interface to use to contact peer
local_address string / required	Source IP address to be used for BFD sessions over the interface
passive_mode boolean	Specifies BFD peer as passive when set to true Choices: `false` ← (default) `true`
profile_name string	BFD profile name
receive_interval integer	Specifies peer receive interval Default: `300`
remote_address string / required	IP address used by the remote system for the BFD session
transmit_interval integer	Specifies peer transmit interval Default: `300`
vrf string / required	Name of the configured VRF on the device
state string	The state of the configuration after module completion. Choices: `"merged"` ← (default) `"deleted"` `"replaced"` `"overridden"`

Examples 

# Using Merged
#
# Before state:
# -------------
#
# sonic# show bfd profile
# (No "bfd profile" configuration present)
# sonic# show bfd peers
# (No "bfd peers" configuration present)

  - name: Merge BFD configuration
    input:
      profiles:
        - profile_name: 'p1'
          enabled: True
          transmit_interval: 120
          receive_interval: 200
          detect_multiplier: 2
          passive_mode: True
          min_ttl: 140
          echo_interval: 150
          echo_mode: True
      single_hops:
        - remote_address: '196.88.6.1'
          vrf: 'default'
          interface: 'Ethernet20'
          local_address: '1.1.1.1'
          enabled: True
          transmit_interval: 50
          receive_interval: 80
          detect_multiplier: 4
          passive_mode: True
          echo_interval: 110
          echo_mode: True
          profile_name: 'p1'
      multi_hops:
        - remote_address: '192.40.1.3'
          vrf: 'default'
          local_address: '3.3.3.3'
          enabled: True
          transmit_interval: 75
          receive_interval: 100
          detect_multiplier: 3
          passive_mode: True
          min_ttl: 125
          profile_name: 'p1'
    state: merged

# After state:
# ------------
#
# sonic# show bfd profile
# BFD Profile:
#     Profile-name: p1
#         Enabled: True
#         Echo-mode: Enabled
#         Passive-mode: Enabled
#         Minimum-Ttl: 140
#         Detect-multiplier: 2
#         Receive interval: 200ms
#         Transmission interval: 120ms
#         Echo transmission interval: 150ms
# sonic# show bfd peers
# BFD Peers:
#
#     peer 192.40.1.3 multihop local-address 3.3.3.3 vrf default
#         ID: 989720421
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Minimum TTL: 125
#         Status: down
#         Downtime: 0 day(s), 0 hour(s), 1 min(s), 46 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 2
#             Receive interval: 100ms
#             Transmission interval: 75ms
#             Echo transmission interval: ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#     peer 196.88.6.1 local-address 1.1.1.1 vrf default interface Ethernet20
#         ID: 1134635660
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Status: down
#         Downtime: 0 day(s), 1 hour(s), 50 min(s), 48 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 4
#             Receive interval: 80ms
#             Transmission interval: 50ms
#             Echo transmission interval: 110ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#
# Using replaced
#
# Before state:
# -------------
#
# sonic# show bfd profile
# BFD Profile:
#     Profile-name: p1
#         Enabled: True
#         Echo-mode: Enabled
#         Passive-mode: Enabled
#         Minimum-Ttl: 140
#         Detect-multiplier: 2
#         Receive interval: 200ms
#         Transmission interval: 120ms
#         Echo transmission interval: 150ms
#     Profile-name: p2
#         Enabled: True
#         Echo-mode: Disabled
#         Passive-mode: Disabled
#         Minimum-Ttl: 254
#         Detect-multiplier: 3
#         Receive interval: 300ms
#         Transmission interval: 300ms
#         Echo transmission interval: 300ms

  - name: Replace BFD configuration
    input:
      profiles:
        - profile_name: 'p1'
          transmit_interval: 144
        - profile_name: 'p2'
          enabled: False
          transmit_interval: 110
          receive_interval: 235
          detect_multiplier: 5
          passive_mode: True
          min_ttl: 155
          echo_interval: 163
          echo_mode: True
    state: replaced

# After state:
# ------------
#
# sonic# show bfd profile
# BFD Profile:
#     Profile-name: p1
#         Enabled: True
#         Echo-mode: Enabled
#         Passive-mode: Enabled
#         Minimum-Ttl: 140
#         Detect-multiplier: 2
#         Receive interval: 200ms
#         Transmission interval: 144ms
#         Echo transmission interval: 150ms
#     Profile-name: p2
#         Enabled: False
#         Echo-mode: Enabled
#         Passive-mode: Enabled
#         Minimum-Ttl: 155
#         Detect-multiplier: 5
#         Receive interval: 235ms
#         Transmission interval: 110ms
#         Echo transmission interval: 163ms
#
#
# Using overridden
#
# Before state:
# -------------
#
# sonic# show bfd peers
# BFD Peers:
#
#     peer 192.40.1.3 multihop local-address 3.3.3.3 vrf default
#         ID: 989720421
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Minimum TTL: 125
#         Status: down
#         Downtime: 0 day(s), 0 hour(s), 1 min(s), 46 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 2
#             Receive interval: 100ms
#             Transmission interval: 75ms
#             Echo transmission interval: ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#     peer 196.88.6.1 local-address 1.1.1.1 vrf default interface Ethernet20
#         ID: 1134635660
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Status: down
#         Downtime: 0 day(s), 1 hour(s), 50 min(s), 48 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 4
#             Receive interval: 80ms
#             Transmission interval: 50ms
#             Echo transmission interval: 110ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms

  - name: Override BFD configuration
    input:
      single_hops:
        - remote_address: '172.68.2.1'
          vrf: 'default'
          interface: 'Ethernet16'
          local_address: '2.2.2.2'
          enabled: True
          transmit_interval: 60
          receive_interval: 88
          detect_multiplier: 6
          passive_mode: True
          echo_interval: 112
          echo_mode: True
          profile_name: 'p3'
      multi_hops:
        - remote_address: '186.42.1.2'
          vrf: 'default'
          local_address: '1.1.1.1'
          enabled: False
          transmit_interval: 85
          receive_interval: 122
          detect_multiplier: 4
          passive_mode: False
          min_ttl: 120
          profile_name: 'p3'
    state: overridden

# After state:
# ------------
#
# sonic# show bfd peers
# BFD Peers:
#
#     peer 186.42.1.2 multihop local-address 1.1.1.1 vrf default
#         ID: 989720421
#         Remote ID: 0
#         Passive mode: Disabled
#         Profile: p3
#         Minimum TTL: 120
#         Status: down
#         Downtime: 0 day(s), 0 hour(s), 1 min(s), 46 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 4
#             Receive interval: 122ms
#             Transmission interval: 85ms
#             Echo transmission interval: ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#     peer 172.68.2.1 local-address 2.2.2.2 vrf default interface Ethernet16
#         ID: 1134635660
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p3
#         Status: down
#         Downtime: 0 day(s), 1 hour(s), 50 min(s), 48 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 6
#             Receive interval: 88ms
#             Transmission interval: 60ms
#             Echo transmission interval: 112ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#
# Using deleted
#
# Before state:
# -------------
#
# sonic# show bfd profile
# BFD Profile:
#     Profile-name: p1
#         Enabled: True
#         Echo-mode: Enabled
#         Passive-mode: Enabled
#         Minimum-Ttl: 140
#         Detect-multiplier: 2
#         Receive interval: 200ms
#         Transmission interval: 120ms
#         Echo transmission interval: 150ms
# sonic# show bfd peers
# BFD Peers:
#
#     peer 192.40.1.3 multihop local-address 3.3.3.3 vrf default
#         ID: 989720421
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Minimum TTL: 125
#         Status: down
#         Downtime: 0 day(s), 0 hour(s), 1 min(s), 46 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 2
#             Receive interval: 100ms
#             Transmission interval: 75ms
#             Echo transmission interval: ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms
#
#     peer 196.88.6.1 local-address 1.1.1.1 vrf default interface Ethernet20
#         ID: 1134635660
#         Remote ID: 0
#         Passive mode: Enabled
#         Profile: p1
#         Status: down
#         Downtime: 0 day(s), 1 hour(s), 50 min(s), 48 sec(s)
#         Diagnostics: ok
#         Remote diagnostics: ok
#         Peer Type: configured
#         Local timers:
#             Detect-multiplier: 4
#             Receive interval: 80ms
#             Transmission interval: 50ms
#             Echo transmission interval: 110ms
#         Remote timers:
#             Detect-multiplier: 3
#             Receive interval: 1000ms
#             Transmission interval: 1000ms
#             Echo transmission interval: 0ms

  - name: Delete BFD configuration
    input:
      profiles:
        - profile_name: 'p1'
          enabled: True
          transmit_interval: 120
          receive_interval: 200
          detect_multiplier: 2
          passive_mode: True
          min_ttl: 140
          echo_interval: 150
          echo_mode: True
      single_hops:
        - remote_address: '196.88.6.1'
          vrf: 'default'
          interface: 'Ethernet20'
          local_address: '1.1.1.1'
      multi_hops:
        - remote_address: '192.40.1.3'
          vrf: 'default'
          local_address: '3.3.3.3'
    state: deleted

# After state
# -----------
#
# sonic# show bfd profile
# BFD Profile:
#     Profile-name: p1
#         Enabled: True
#         Echo-mode: Disabled
#         Passive-mode: Disabled
#         Minimum-Ttl: 254
#         Detect-multiplier: 3
#         Receive interval: 300ms
#         Transmission interval: 300ms
#         Echo transmission interval: 300ms
# sonic# show bfd peers
# (No "bfd peers" configuration present)

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration model invocation. Returned: when changed Sample: `["The configuration returned will always be in the same format of the parameters above.\n"]`
before list / elements=string	The configuration prior to the model invocation. Returned: always Sample: `["The configuration returned will always be in the same format of the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`

Authors

Shade Talabi (@stalabi1)

dellemc.enterprise_sonic.sonic_bfd module – Manage BFD configuration on SONiC

Synopsis

Parameters

Examples

Return Values