You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_device_connectivity module – Manages device IP configuration settings for HA on a BIG-IP.

Note

This module is part of the f5networks.f5_modules collection (version 1.27.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_device_connectivity.

New in f5networks.f5_modules 1.0.0

Synopsis 

Manages device IP configuration settings for High Availability (HA) on a BIG-IP. Each BIG-IP device has synchronization and failover connectivity information (IP addresses) that you define as part of HA pairing or clustering. This module allows you to configure that information.

Parameters 

Parameter	Comments
cluster_mirroring string	Specifies whether mirroring occurs within the same cluster or between different clusters on a multi-bladed system. This parameter is only supported on platforms that have multiple blades, such as Viprion hardware. It is not supported on Virtual Editions (VEs). Choices: `"between-clusters"` `"within-cluster"`
config_sync_ip string	Local IP address the system uses for ConfigSync operations.
failover_multicast boolean	When `true`, ensures the Failover Multicast configuration is enabled and, if no further multicast configuration is provided, ensures that `multicast_interface`, `multicast_address` and `multicast_port` are the defaults specified in the description of each option. When `false`, ensures that Failover Multicast configuration is disabled. Choices: `false` `true`
mirror_primary_address string	Specifies the primary IP address for the system to use to mirror connections.
mirror_secondary_address string	Specifies the secondary IP address for the system to use to mirror connections.
multicast_address string	IP address for the system to send multicast messages associated with failover. When `failover_multicast` is `true` and this option is not provided, a default of `224.0.0.245` will be used.
multicast_interface string	Interface over which the system sends multicast messages associated with failover. When `failover_multicast` is `true` and this option is not provided, a default of `eth0` will be used.
multicast_port integer	Port for the system to send multicast messages associated with failover. When `failover_multicast` is `true` and this option is not provided, a default of `62960` will be used. This value must be between 0 and 65535.
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing. Choices: `false` ← (default) `true`
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable `F5_PASSWORD`.
server string / required	The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`. Default: `443`
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: `"rest"` ← (default)
user string / required	The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`. Choices: `false` `true` ← (default)
unicast_failover list / elements=dictionary	Addresses to use for failover operations. Options `address` and `port` are supported with dictionary structure, where `address` is the local IP address the system uses for failover operations. Port specifies the port the system uses for failover operations. If `port` is not specified, the default value `1026` will be used. If you are specifying the (recommended) management IP address, use ‘management-ip’ in the address field. When the value is set to empty list, the parameter value is removed from device.

Notes 

Note

This module is primarily used as a component of configuring HA pairs of BIG-IP devices.
Requires BIG-IP >= 12.0.0
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples 

- name: Configure device connectivity for standard HA pair
  bigip_device_connectivity:
    config_sync_ip: 10.1.30.1
    mirror_primary_address: 10.1.30.1
    unicast_failover:
      - address: management-ip
      - address: 10.1.30.1
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
changed boolean	Denotes if the F5 configuration was updated. Returned: always
cluster_mirroring string	The current cluster-mirroring setting. Returned: changed Sample: `"between-clusters"`
config_sync_ip string	The new value of the `config_sync_ip` setting. Returned: changed Sample: `"10.1.1.1"`
failover_multicast boolean	Whether a failover multicast attribute has been changed or not. Returned: changed
mirror_primary_address string	The new value of the `mirror_primary_address` setting. Returned: changed Sample: `"10.1.1.2"`
mirror_secondary_address string	The new value of the `mirror_secondary_address` setting. Returned: changed Sample: `"10.1.1.3"`
multicast_address string	The new value of the `multicast_address` setting. Returned: changed Sample: `"224.0.0.245"`
multicast_interface string	The new value of the `multicast_interface` setting. Returned: changed Sample: `"eth0"`
multicast_port integer	The new value of the `multicast_port` setting. Returned: changed Sample: `1026`
unicast_failover list / elements=string	The new value of the `unicast_failover` setting. Returned: changed Sample: `[{"address": "10.1.1.2", "port": 1026}]`

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

f5networks.f5_modules.bigip_device_connectivity module – Manages device IP configuration settings for HA on a BIG-IP.

Synopsis

Parameters

Notes

Examples

Return Values