You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

f5networks.f5_modules.bigip_device_httpd module – Manage HTTPD related settings on a BIG-IP system

Note

This module is part of the f5networks.f5_modules collection (version 1.27.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: f5networks.f5_modules.bigip_device_httpd.

New in f5networks.f5_modules 1.0.0

Synopsis 

Manages HTTPD related settings on the BIG-IP. These settings are useful when you want to set GUI timeouts and other TMUI related settings.

Requirements 

The below requirements are needed on the host that executes this module.

requests

Parameters 

Parameter	Comments
allow list / elements=string	If you have enabled HTTPD access, specifies the IP address or address range for other systems that can communicate with this system. To specify all addresses, use the value `all`. An IP address can be specified, such as 172.27.1.10. IP ranges can be specified, such as 172.27.. or 172.27.0.0/255.255.0.0.
auth_name string	Sets the BIG-IP authentication realm name.
auth_pam_dashboard_timeout boolean	Sets whether or not the BIG-IP dashboard will timeout. Choices: `false` `true`
auth_pam_idle_timeout integer	Sets the GUI timeout for automatic logout, in seconds.
auth_pam_validate_ip boolean	Sets the authPamValidateIp setting. Choices: `false` `true`
fast_cgi_timeout integer	Sets the timeout of FastCGI.
hostname_lookup boolean	Sets whether or not to display the hostname, if possible. Choices: `false` `true`
log_level string	Sets the minimum HTTPD log level. Choices: `"alert"` `"crit"` `"debug"` `"emerg"` `"error"` `"info"` `"notice"` `"warn"`
max_clients integer	Sets the maximum number of clients that can connect to the GUI at once.
provider dictionary added in f5networks.f5_modules 1.0.0	A dict object containing connection details.
auth_provider string	Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
no_f5_teem boolean	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing. Choices: `false` ← (default) `true`
password aliases: pass, pwd string / required	The password for the user account used to connect to the BIG-IP or the BIG-IQ. You may omit this option by setting the environment variable `F5_PASSWORD`.
server string / required	The BIG-IP host or the BIG-IQ host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port integer	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`. Default: `443`
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport string	Configures the transport connection to use when connecting to the remote device. Choices: `"rest"` ← (default)
user string / required	The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs boolean	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`. Choices: `false` `true` ← (default)
redirect_http_to_https boolean	Whether or not to redirect HTTP requests to the GUI to HTTPS. Choices: `false` `true`
ssl_cipher_suite any	Specifies the ciphers the system uses. The values in the suite are separated by colons (:). Can be specified in either a string or list form. The list form is the recommended way to provide the cipher suite. See examples for usage. Use the value `default` to set the cipher suite to the system default. This value is equivalent to specifying a list of `ECDHE-RSA-AES128-GCM-SHA256, ECDHE-RSA-AES256-GCM-SHA384,ECDHE-RSA-AES128-SHA,ECDHE-RSA-AES256-SHA, ECDHE-RSA-AES128-SHA256,ECDHE-RSA-AES256-SHA384,ECDHE-ECDSA-AES128-GCM-SHA256, ECDHE-ECDSA-AES256-GCM-SHA384,ECDHE-ECDSA-AES128-SHA,ECDHE-ECDSA-AES256-SHA, ECDHE-ECDSA-AES128-SHA256,ECDHE-ECDSA-AES256-SHA384,AES128-GCM-SHA256, AES256-GCM-SHA384,AES128-SHA,AES256-SHA,AES128-SHA256,AES256-SHA256, ECDHE-RSA-DES-CBC3-SHA,ECDHE-ECDSA-DES-CBC3-SHA,DES-CBC3-SHA`.
ssl_port integer	The HTTPS port on which the system should listen.
ssl_protocols any	The list of SSL protocols to accept on the management console. A space-separated list of tokens in the format accepted by the Apache mod_ssl SSLProtocol directive. Can be specified in either a string or list form. The list form is the recommended way to provide the cipher suite. See examples for usage. Use the value `default` to set the SSL protocols to the system default. This value is equivalent to specifying a list of `all,-SSLv2,-SSLv3`.

Notes 

Note

Requires the requests Python package on the host. This is as easy as running pip install requests.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples 

- name: Set the BIG-IP authentication realm name
  bigip_device_httpd:
    auth_name: BIG-IP
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the auth pam timeout to 3600 seconds
  bigip_device_httpd:
    auth_pam_idle_timeout: 1200
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set the validate IP settings
  bigip_device_httpd:
    auth_pam_validate_ip: false
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL cipher suite by list
  bigip_device_httpd:
    ssl_cipher_suite:
      - ECDHE-RSA-AES128-GCM-SHA256
      - ECDHE-RSA-AES256-GCM-SHA384
      - ECDHE-RSA-AES128-SHA
      - AES256-SHA256
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL cipher suite by string
  bigip_device_httpd:
    ssl_cipher_suite: ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-SHA:AES256-SHA256
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL protocols by list
  bigip_device_httpd:
    ssl_protocols:
      - all
      - -SSLv2
      - -SSLv3
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set SSL protocols by string
  bigip_device_httpd:
    ssl_protocols: all -SSLv2 -SSLv3
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
auth_name string	The new authentication realm name. Returned: changed Sample: `"foo"`
auth_pam_dashboard_timeout boolean	Whether or not the BIG-IP dashboard will timeout. Returned: changed Sample: `false`
auth_pam_idle_timeout string	The new number of seconds for GUI timeout. Returned: changed Sample: `"1200"`
auth_pam_validate_ip boolean	The new authPamValidateIp setting. Returned: changed Sample: `true`
fast_cgi_timeout integer	The new timeout of FastCGI. Returned: changed Sample: `500`
hostname_lookup boolean	Whether or not to display the hostname, if possible. Returned: changed Sample: `true`
log_level string	The new minimum HTTPD log level. Returned: changed Sample: `"crit"`
max_clients integer	The new maximum number of clients that can connect to the GUI at once. Returned: changed Sample: `20`
redirect_http_to_https boolean	Whether or not to redirect HTTP requests to the GUI to HTTPS. Returned: changed Sample: `true`
ssl_cipher_suite string	The new ciphers the system uses. Returned: changed Sample: `"ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-SHA"`
ssl_cipher_suite_list string	List of the new ciphers the system uses. Returned: changed Sample: `"['ECDHE-RSA-AES256-GCM-SHA384', 'ECDHE-RSA-AES128-SHA']"`
ssl_port integer	The new HTTPS port to listen on. Returned: changed Sample: `10443`
ssl_protocols string	The new list of SSL protocols to accept on the management console. Returned: changed Sample: `"all -SSLv2 -SSLv3"`

Authors

Joe Reifel (@JoeReifel)
Tim Rupp (@caphrim007)

f5networks.f5_modules.bigip_device_httpd module – Manage HTTPD related settings on a BIG-IP system

Synopsis

Requirements

Parameters

Notes

Examples

Return Values