f5networks.f5_modules.bigip_provision_async module – Manage BIG-IP module provisioning

Note

This module is part of the f5networks.f5_modules collection (version 1.27.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_provision_async.

New in f5networks.f5_modules 1.25.0

Synopsis

  • Manages BIG-IP module provisioning. This module will perform provisioning operations in an asynchronous way. See the Notes section for more information.

Parameters

Parameter

Comments

check_status

boolean

If true, then the module will run to check provisioning progress.

Required parameter, if using the module parameter.

Choices:

  • false ← (default)

  • true

level

string

Sets the provisioning level for the requested modules. Changing the level for one module may require modifying the level of another module. For example, changing one module to dedicated requires setting all others to none. Setting the level of a module to none means the module is not activated.

Use a state if absent to set c(level) to none and de-provision the module.

This parameter is not relevant to cgnat - pre tmos 15.0 or mgmt and will not be applied to the cgnat - pre tmos 15.0 or the mgmt module.

Choices:

  • "dedicated"

  • "nominal" ← (default)

  • "minimum"

memory

string

Sets additional memory for the management module. This is in addition to the minimum allocated RAM of 1264MB.

The accepted value range is 0 - 8192. Maximum value is restricted by the available RAM in the system.

Specifying large reserves an additional 500MB for the mgmt module.

Specifying medium reserves an additional 200MB for the mgmt module.

Specifying small reserves no additional RAM for the mgmt module.

Use large for configurations containing more than 2000 objects, or more specifically, for any configuration that exceeds 1000 objects per 2 GB of installed memory. Changing the Management mgmt size after initial provisioning causes a re-provision operation.

module

aliases: name

string / required

The module to provision in BIG-IP.

Choices:

  • "am"

  • "afm"

  • "apm"

  • "asm"

  • "avr"

  • "cgnat"

  • "fps"

  • "gtm"

  • "ilx"

  • "lc"

  • "ltm"

  • "mgmt"

  • "pem"

  • "sam"

  • "sslo"

  • "swg"

  • "urldb"

  • "vcmp"

provider

dictionary

added in f5networks.f5_modules 1.0.0

A dict object containing connection details.

auth_provider

string

Configures the auth provider for to obtain authentication tokens from the remote device.

This option is really used when working with BIG-IQ devices.

no_f5_teem

boolean

If yes, TEEM telemetry data is not sent to F5.

You may omit this option by setting the environment variable F5_TELEMETRY_OFF.

Previously used variable F5_TEEM is deprecated as its name was confusing.

Choices:

  • false ← (default)

  • true

password

aliases: pass, pwd

string / required

The password for the user account used to connect to the BIG-IP or the BIG-IQ.

You may omit this option by setting the environment variable F5_PASSWORD.

server

string / required

The BIG-IP host or the BIG-IQ host.

You may omit this option by setting the environment variable F5_SERVER.

server_port

integer

The BIG-IP server port.

You may omit this option by setting the environment variable F5_SERVER_PORT.

Default: 443

timeout

integer

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

transport

string

Configures the transport connection to use when connecting to the remote device.

Choices:

  • "rest" ← (default)

user

string / required

The username to connect to the BIG-IP or the BIG-IQ. This user must have administrative privileges on the device.

You may omit this option by setting the environment variable F5_USER.

validate_certs

boolean

If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.

You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Choices:

  • false

  • true ← (default)

state

string

The state of the provisioned module on the system. If present, then that guarantees the specified module is provisioned at the requested level, provided there are sufficient resources on the device (such as physical RAM) to support the module.

If absent, then that de-provisions the module.

absent, is not an option for the mgmt module, as it cannot be de-provisioned.

Choices:

  • "present" ← (default)

  • "absent"

status_timeout

integer

The amount of time in seconds to wait for provisioning process to finish.

The accepted value range is between 150 and 3600 seconds.

If the device needs to restart the module, then it will return with no change and an appropriate message. In such cases, you must pause the playbook execution, until the device is ready (see the EXAMPLES section).

Default: 300

Notes

Note

  • Checking for provisioning status with the check_status parameter is not idempotent (see the EXAMPLES section).

  • The module allows the same provisioning operations as bigip_provision with the difference being that it will not wait through the service restarts or device reboots. This is to fix the edge cases, when using this module in certain environments that can cause a timeout or be stuck in infinite loops, despite the provisioning operation being successful.

  • Use the module in conjunction with the bigip_wait module, for best results.

  • This module requires TMOS version of 15.x and above.

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

  • Requires BIG-IP software version >= 12.

  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Provision GTM on the device
  bigip_provision_async:
    module: "gtm"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin

- name: Check for provision progress
  bigip_provision_async:
    module: "gtm"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  register: status

- name: Wait for 3 minutes if device is restarting services
  bigip_wait:
    timeout: 180
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  when:
    - result.message == "Device is restarting services, unable to check provisioning status."

- name: Re-check for provision progress
  bigip_provision_async:
    module: "gtm"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  register: status
  when:
    - status.message == "Device is restarting services, unable to check provisioning status."

- name: Provision GTM on the device - Idempotent Check
  bigip_provision_async:
    module: "gtm"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  register: result
  when:
    - status.message == "Device has finished provisioning the requested module."

- name: Assert Provision GTM on the device - Idempotent Check
  assert:
    that:
      - result is not changed
  when:
    - status.message == "Device has finished provisioning the requested module."

- name: Provision VCMP on the device
  bigip_provision_async:
    module: "vcmp"
    level: "dedicated"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost

- name: Check for provision progress
  bigip_provision_async:
    module: "vcmp"
    level: "dedicated"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  register: status

- name: Wait for 10 minutes if device is restarting services
  bigip_wait:
    timeout: 600
    type: vcmp
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  when:
    - result.message == "Device is restarting services, unable to check provisioning status."

- name: Re-check for provision progress
  bigip_provision_async:
    module: "vcmp"
    level: "dedicated"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  delegate_to: localhost
  register: status
  when:
    - status.message == "Device is restarting services, unable to check provisioning status."

- name: Provision VCMP on the device - Idempotent Check
  bigip_provision_async:
    module: "vcmp"
    level: "dedicated"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  register: result
  delegate_to: localhost
  when:
    - status.message == "Device has finished provisioning the requested module."

- name: Assert Provision VCMP on the device - Idempotent Check
  assert:
    that:
      - result is not changed
  when:
    - status.message == "Device has finished provisioning the requested module."

- name: De-provision VCMP on the device
  bigip_provision_async:
    module: "vcmp"
    state: "absent"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin

- name: Check for de-provision progress
  bigip_provision_async:
    module: "vcmp"
    state: "absent"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  register: status

- name: Wait for 10 minutes if device is restarting services
  bigip_wait:
    timeout: 600
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  when:
    - result.message == "Device is restarting services, unable to check provisioning status."

- name: Re-check for de-provision progress
  bigip_provision_async:
    module: "vcmp"
    state: "absent"
    check_status: true
    status_timeout: 900
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  register: status
  when:
    - status.message == "Device is restarting services, unable to check provisioning status."

- name: De-provision VCMP on the device - Idempotent Check
  bigip_provision_async:
    module: "vcmp"
    state: "absent"
    provider:
      server: lb.mydomain.com
      password: secret
      user: admin
  register: result
  when:
    - status.message == "Device has finished de-provisioning the requested module."

- name: Assert Provision VCMP on the device - Idempotent Check
  assert:
    that:
      - result is not changed
  when:
    - status.message == "Device has finished de-provisioning the requested module."

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

level

string

The new provisioning level of the module.

Returned: changed

Sample: "minimum"

memory

string

The new provisioned amount of memory for the mgmt module.

Returned: changed

Sample: "large"

message

dictionary

Informative message of the ansible task status.

Returned: changed

Sample: "hash/dictionary of values"

Authors

  • Wojciech Wypior (@wojtek0806)