fortinet.fortios.fortios_system_vxlan module – Configure VXLAN devices in Fortinet’s FortiOS and FortiGate.
Note
This module is part of the fortinet.fortios collection (version 2.3.4).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: fortinet.fortios.fortios_system_vxlan
.
New in fortinet.fortios 2.0.0
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system feature and vxlan category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.14
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Indicates whether to create or remove the object. Choices:
|
|
Configure VXLAN devices. |
|
VXLAN destination port (1 - 65535). |
|
EVPN instance. Source system.evpn.id. |
|
Outgoing interface for VXLAN encapsulated traffic. Source system.interface.name. |
|
IP version to use for the VXLAN interface and so for communication over the VXLAN. IPv4 or IPv6 unicast or multicast. Choices:
|
|
Enable/disable VXLAN MAC learning from traffic. Choices:
|
|
VXLAN multicast TTL (1-255). |
|
VXLAN device or interface name. Must be a unique interface name. |
|
IPv4 address of the VXLAN interface on the device at the remote end of the VXLAN. |
|
IPv4 address. |
|
IPv6 IP address of the VXLAN interface on the device at the remote end of the VXLAN. |
|
IPv6 address. |
|
VXLAN network ID. |
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: |
Notes
Note
Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks
Examples
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure VXLAN devices.
fortios_system_vxlan:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
system_vxlan:
dstport: "4789"
evpn_id: "0"
interface: "<your_own_value> (source system.interface.name)"
ip_version: "ipv4-unicast"
learn_from_traffic: "enable"
multicast_ttl: "0"
name: "default_name_9"
remote_ip:
-
ip: "<your_own_value>"
remote_ip6:
-
ip6: "<your_own_value>"
vni: "0"
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: |
|
Last method used to provision the content into FortiGate Returned: always Sample: |
|
Last result given by FortiGate on last operation applied Returned: always Sample: |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: |
|
Name of the table used to fulfill the request Returned: always Sample: |
|
Path of the table used to fulfill the request Returned: always Sample: |
|
Internal revision number Returned: always Sample: |
|
Serial number of the unit Returned: always Sample: |
|
Indication of the operation’s result Returned: always Sample: |
|
Virtual domain used Returned: always Sample: |
|
Version of the FortiGate Returned: always Sample: |