google.cloud.gcp_container_cluster module – Creates a GCP Cluster

Note

This module is part of the google.cloud collection (version 1.3.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install google.cloud. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: google.cloud.gcp_container_cluster.

Synopsis

  • A Google Container Engine cluster.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.6

  • requests >= 2.18.4

  • google-auth >= 1.3.0

Parameters

Parameter

Comments

access_token

string

An OAuth2 access token if credential type is accesstoken.

addons_config

dictionary

Configurations for the various addons available to run in the cluster.

horizontal_pod_autoscaling

dictionary

Configuration for the horizontal pod autoscaling feature, which increases or decreases the number of replica pods a replication controller has based on the resource usage of the existing pods.

disabled

boolean

Whether the Horizontal Pod Autoscaling feature is enabled in the cluster. When enabled, it ensures that a Heapster pod is running in the cluster, which is also used by the Cloud Monitoring service.

Choices:

  • false

  • true

http_load_balancing

dictionary

Configuration for the HTTP (L7) load balancing controller addon, which makes it easy to set up HTTP load balancers for services in a cluster.

disabled

boolean

Whether the HTTP Load Balancing controller is enabled in the cluster. When enabled, it runs a small pod in the cluster that manages the load balancers.

Choices:

  • false

  • true

network_policy_config

dictionary

Configuration for NetworkPolicy. This only tracks whether the addon is enabled or not on the Master, it does not track whether network policy is enabled for the nodes.

disabled

boolean

Whether NetworkPolicy is enabled for this cluster.

Choices:

  • false

  • true

auth_kind

string / required

The type of credential used.

Choices:

  • "application"

  • "machineaccount"

  • "serviceaccount"

  • "accesstoken"

binary_authorization

dictionary

Configuration for the BinaryAuthorization feature.

enabled

boolean

If enabled, all container images will be validated by Binary Authorization.

Choices:

  • false

  • true

cluster_ipv4_cidr

string

The IP address range of the container pods in this cluster, in CIDR notation (e.g. 10.96.0.0/14). Leave blank to have one automatically chosen or specify a /14 block in 10.0.0.0/8.

database_encryption

dictionary

Configuration of etcd encryption.

key_name

string

Name of CloudKMS key to use for the encryption of secrets in etcd. Ex.

`projects/my-project/locations/global/keyRings/my-ring/cryptoKeys/my-key` .

state

string

Denotes the state of etcd encryption.

Some valid choices include: “ENCRYPTED”, “DECRYPTED”

default_max_pods_constraint

dictionary

The default constraint on the maximum number of pods that can be run simultaneously on a node in the node pool of this cluster.

Only honored if cluster created with IP Alias support.

max_pods_per_node

string

Constraint enforced on the max num of pods per node.

description

string

An optional description of this cluster.

enable_kubernetes_alpha

boolean

Kubernetes alpha features are enabled on this cluster. This includes alpha API groups (e.g. v1alpha1) and features that may not be production ready in the kubernetes version of the master and nodes.

Choices:

  • false

  • true

enable_tpu

boolean

(Optional) Whether to enable Cloud TPU resources in this cluster.

See the official documentation - https://cloud.google.com/tpu/docs/kubernetes-engine-setup .

Choices:

  • false

  • true

env_type

string

Specifies which Ansible environment you’re running this module within.

This should not be set unless you know what you’re doing.

This only alters the User Agent string for any API requests.

initial_cluster_version

string

The software version of the master endpoint and kubelets used in the cluster when it was first created. The version can be upgraded over time.

initial_node_count

integer

The number of nodes to create in this cluster. You must ensure that your Compute Engine resource quota is sufficient for this number of instances. You must also have available firewall and routes quota. For requests, this field should only be used in lieu of a “nodePool” object, since this configuration (along with the “nodeConfig”) will be used to create a “NodePool” object with an auto-generated name. Do not use this and a nodePool at the same time.

This field has been deprecated. Please use nodePool.initial_node_count instead.

ip_allocation_policy

dictionary

Configuration for controlling how IPs are allocated in the cluster.

cluster_ipv4_cidr_block

string

The IP address range for the cluster pod IPs. If this field is set, then cluster.cluster_ipv4_cidr must be left blank.

This field is only applicable when useIpAliases is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

cluster_secondary_range_name

string

The name of the secondary range to be used for the cluster CIDR block. The secondary range will be used for pod IP addresses.

This must be an existing secondary range associated with the cluster subnetwork .

create_subnetwork

boolean

Whether a new subnetwork will be created automatically for the cluster.

Choices:

  • false

  • true

node_ipv4_cidr_block

string

The IP address range of the instance IPs in this cluster.

This is applicable only if createSubnetwork is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

services_ipv4_cidr_block

string

The IP address range of the services IPs in this cluster. If blank, a range will be automatically chosen with the default size.

This field is only applicable when useIpAliases is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

services_secondary_range_name

string

The name of the secondary range to be used as for the services CIDR block. The secondary range will be used for service ClusterIPs. This must be an existing secondary range associated with the cluster subnetwork.

stack_type

string

The IP stack type of the cluster, possible values: (STACK_TYPE_UNSPECIFIED, IPV4, IPV4_IPV6)

subnetwork_name

string

A custom subnetwork name to be used if createSubnetwork is true.

If this field is empty, then an automatic name will be chosen for the new subnetwork.

tpu_ipv4_cidr_block

string

The IP address range of the Cloud TPUs in this cluster. If unspecified, a range will be automatically chosen with the default size.

This field is only applicable when useIpAliases is true.

If unspecified, the range will use the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

use_ip_aliases

boolean

Whether alias IPs will be used for pod IPs in the cluster.

Choices:

  • false

  • true

kubectl_context

string

The name of the context for the kubectl config file. Will default to the cluster name.

kubectl_path

string

The path that the kubectl config file will be written to.

The file will not be created if this path is unset.

Any existing file at this path will be completely overwritten.

This requires the PyYaml library.

legacy_abac

dictionary

Configuration for the legacy ABAC authorization mode.

enabled

boolean

Whether the ABAC authorizer is enabled for this cluster. When enabled, identities in the system, including service accounts, nodes, and controllers, will have statically granted permissions beyond those provided by the RBAC configuration or IAM.

Choices:

  • false

  • true

location

aliases: zone

string / required

The location where the cluster is deployed.

locations

aliases: nodeLocations

list / elements=string

The list of Google Compute Engine zones in which the cluster’s nodes should be located.

logging_service

string

The logging service the cluster should use to write logs. Currently available options: logging.googleapis.com - the Google Cloud Logging service.

none - no logs will be exported from the cluster.

if left as an empty string,logging.googleapis.com will be used.

Some valid choices include: “logging.googleapis.com”, “none”

master_auth

dictionary

The authentication information for accessing the master endpoint.

client_certificate_config

dictionary

Configuration for client certificate authentication on the cluster. For clusters before v1.12, if no configuration is specified, a client certificate is issued.

issue_client_certificate

boolean

Issue a client certificate.

Choices:

  • false

  • true

password

string

The password to use for HTTP basic authentication to the master endpoint. Because the master endpoint is open to the Internet, you should create a strong password with a minimum of 16 characters. (unsupported with GKE >= 1.19).

username

string

The username to use for HTTP basic authentication to the master endpoint. (unsupported with GKE >= 1.19).

master_authorized_networks_config

dictionary

Configuration for controlling how IPs are allocated in the cluster.

cidr_blocks

list / elements=dictionary

Define up to 50 external networks that could access Kubernetes master through HTTPS.

cidr_block

string

Block specified in CIDR notation.

display_name

string

Optional field used to identify cidr blocks.

enabled

boolean

Whether or not master authorized networks is enabled.

Choices:

  • false

  • true

monitoring_service

string

The monitoring service the cluster should use to write metrics.

Currently available options: monitoring.googleapis.com - the Google Cloud Monitoring service.

none - no metrics will be exported from the cluster.

if left as an empty string, monitoring.googleapis.com will be used.

Some valid choices include: “monitoring.googleapis.com”, “none”

name

string

The name of this cluster. The name must be unique within this project and location, and can be up to 40 characters. Must be Lowercase letters, numbers, and hyphens only. Must start with a letter. Must end with a number or a letter.

network

string

The name of the Google Compute Engine network to which the cluster is connected. If left unspecified, the default network will be used.

network_config

dictionary

Network configurations .

datapath_provider

string

The datapath provider selects the implementation of the Kubernetes networking model for service resolution and network policy enforcement.

default_snat_status

boolean

Whether the cluster disables default in-node sNAT rules. In-node sNAT rules will be disabled when defaultSnatStatus is disabled.

Choices:

  • false

  • true

enable_intra_node_visibility

boolean

Whether Intra-node visibility is enabled for this cluster. This makes same node pod to pod traffic visible for VPC network.

Choices:

  • false

  • true

network_policy

dictionary

Configuration options for the NetworkPolicy feature.

enabled

boolean

Whether network policy is enabled on the cluster.

Choices:

  • false

  • true

provider

string

The selected network policy provider.

Some valid choices include: “PROVIDER_UNSPECIFIED”, “CALICO”

node_config

dictionary

Parameters used in creating the cluster’s nodes.

For requests, this field should only be used in lieu of a “nodePool” object, since this configuration (along with the “initialNodeCount”) will be used to create a “NodePool” object with an auto-generated name. Do not use this and a nodePool at the same time. For responses, this field will be populated with the node configuration of the first node pool. If unspecified, the defaults are used.

accelerators

list / elements=dictionary

A list of hardware accelerators to be attached to each node. See https://cloud.google.com/compute/docs/gpus for more information about support for GPUs.

accelerator_count

string

The number of accelerator cards exposed to an instance.

accelerator_type

string

The accelerator type resource name.

disk_size_gb

integer

Size of the disk attached to each node, specified in GB. The smallest allowed disk size is 10GB. If unspecified, the default disk size is 100GB.

disk_type

string

Type of the disk attached to each node (e.g. ‘pd-standard’ or ‘pd-ssd’) If unspecified, the default disk type is ‘pd-standard’ .

image_type

string

The image type to use for this node. Note that for a given image type, the latest version of it will be used.

labels

dictionary

The map of Kubernetes labels (key/value pairs) to be applied to each node. These will added in addition to any default label(s) that Kubernetes may apply to the node. In case of conflict in label keys, the applied set may differ depending on the Kubernetes version – it’s best to assume the behavior is undefined and conflicts should be avoided. For more information, including usage and the valid values, see: http://kubernetes.io/v1.1/docs/user-guide/labels.html An object containing a list of “key”: value pairs.

Example: { “name”: “wrench”, “mass”: “1.3kg”, “count”: “3” }.

local_ssd_count

integer

The number of local SSD disks to be attached to the node.

The limit for this value is dependant upon the maximum number of disks available on a machine per zone. See: https://cloud.google.com/compute/docs/disks/local-ssd#local_ssd_limits for more information.

machine_type

string

The name of a Google Compute Engine machine type (e.g.

n1-standard-1). If unspecified, the default machine type is n1-standard-1.

metadata

dictionary

The metadata key/value pairs assigned to instances in the cluster.

Keys must conform to the regexp [a-zA-Z0-9-_]+ and be less than 128 bytes in length. These are reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project or be one of the four reserved keys: “instance-template”, “kube-env”, “startup-script”, and “user-data” Values are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on them is that each value’s size must be less than or equal to 32 KB.

The total size of all keys and values must be less than 512 KB.

An object containing a list of “key”: value pairs.

Example: { “name”: “wrench”, “mass”: “1.3kg”, “count”: “3” }.

min_cpu_platform

string

Minimum CPU platform to be used by this instance. The instance may be scheduled on the specified or newer CPU platform.

oauth_scopes

list / elements=string

The set of Google API scopes to be made available on all of the node VMs under the “default” service account.

The following scopes are recommended, but not required, and by default are not included: https://www.googleapis.com/auth/compute is required for mounting persistent storage on your nodes.

https://www.googleapis.com/auth/devstorage.read_only is required for communicating with gcr.io (the Google Container Registry).

If unspecified, no scopes are added, unless Cloud Logging or Cloud Monitoring are enabled, in which case their required scopes will be added.

preemptible

boolean

Whether the nodes are created as preemptible VM instances. See: https://cloud.google.com/compute/docs/instances/preemptible for more information about preemptible VM instances.

Choices:

  • false

  • true

service_account

string

The Google Cloud Platform Service Account to be used by the node VMs. If no Service Account is specified, the “default” service account is used.

shielded_instance_config

dictionary

Shielded Instance options.

enable_integrity_monitoring

boolean

Defines whether the instance has integrity monitoring enabled.

Enables monitoring and attestation of the boot integrity of the instance.

The attestation is performed against the integrity policy baseline. This baseline is initially derived from the implicitly trusted boot image when the instance is created.

Choices:

  • false

  • true

enable_secure_boot

boolean

Defines whether the instance has Secure Boot enabled.

Secure Boot helps ensure that the system only runs authentic software by verifying the digital signature of all boot components, and halting the boot process if signature verification fails.

Choices:

  • false

  • true

tags

list / elements=string

The list of instance tags applied to all nodes. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during cluster or node pool creation. Each tag within the list must comply with RFC1035.

taints

list / elements=dictionary

List of kubernetes taints to be applied to each node.

For more information, including usage and the valid values, see: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/ .

effect

string

Effect for taint.

Some valid choices include: “EFFECT_UNSPECIFIED”, “NO_SCHEDULE”, “PREFER_NO_SCHEDULE”, “NO_EXECUTE”

key

string

Key for taint.

value

string

Value for taint.

private_cluster_config

dictionary

Configuration for a private cluster.

enable_private_endpoint

boolean

Whether the master’s internal IP address is used as the cluster endpoint.

Choices:

  • false

  • true

enable_private_nodes

boolean

Whether nodes have internal IP addresses only. If enabled, all nodes are given only RFC 1918 private addresses and communicate with the master via private networking.

Choices:

  • false

  • true

master_ipv4_cidr_block

string

The IP range in CIDR notation to use for the hosted master network. This range will be used for assigning internal IP addresses to the master or set of masters, as well as the ILB VIP. This range must not overlap with any other ranges in use within the cluster’s network.

project

string

The Google Cloud Platform project to use.

release_channel

dictionary

ReleaseChannel indicates which release channel a cluster is subscribed to.

Release channels are arranged in order of risk and frequency of updates.

channel

string

Which release channel the cluster is subscribed to.

Some valid choices include: “UNSPECIFIED”, “RAPID”, “REGULAR”, “STABLE”

resource_labels

dictionary

The resource labels for the cluster to use to annotate any related Google Compute Engine resources.

scopes

list / elements=string

Array of scopes to be used

service_account_contents

jsonarg

The contents of a Service Account JSON file, either in a dictionary or as a JSON string that represents it.

service_account_email

string

An optional service account email address if machineaccount is selected and the user does not wish to use the default email.

service_account_file

path

The path of a Service Account JSON file if serviceaccount is selected as type.

shielded_nodes

dictionary

Shielded Nodes configuration.

enabled

boolean

Whether Shielded Nodes features are enabled on all nodes in this cluster.

Choices:

  • false

  • true

state

string

Whether the given object should exist in GCP

Choices:

  • "present" ← (default)

  • "absent"

subnetwork

string

The name of the Google Compute Engine subnetwork to which the cluster is connected.

Examples

- name: create a cluster
  google.cloud.gcp_container_cluster:
    name: my-cluster
    initial_node_count: 2
    node_config:
      machine_type: n1-standard-4
      disk_size_gb: 500
    location: us-central1-a
    project: test_project
    auth_kind: serviceaccount
    service_account_file: "/tmp/auth.pem"
    state: present

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

addonsConfig

complex

Configurations for the various addons available to run in the cluster.

Returned: success

horizontalPodAutoscaling

complex

Configuration for the horizontal pod autoscaling feature, which increases or decreases the number of replica pods a replication controller has based on the resource usage of the existing pods.

Returned: success

disabled

boolean

Whether the Horizontal Pod Autoscaling feature is enabled in the cluster. When enabled, it ensures that a Heapster pod is running in the cluster, which is also used by the Cloud Monitoring service.

Returned: success

httpLoadBalancing

complex

Configuration for the HTTP (L7) load balancing controller addon, which makes it easy to set up HTTP load balancers for services in a cluster.

Returned: success

disabled

boolean

Whether the HTTP Load Balancing controller is enabled in the cluster. When enabled, it runs a small pod in the cluster that manages the load balancers.

Returned: success

networkPolicyConfig

complex

Configuration for NetworkPolicy. This only tracks whether the addon is enabled or not on the Master, it does not track whether network policy is enabled for the nodes.

Returned: success

disabled

boolean

Whether NetworkPolicy is enabled for this cluster.

Returned: success

binaryAuthorization

complex

Configuration for the BinaryAuthorization feature.

Returned: success

enabled

boolean

If enabled, all container images will be validated by Binary Authorization.

Returned: success

clusterIpv4Cidr

string

The IP address range of the container pods in this cluster, in CIDR notation (e.g. 10.96.0.0/14). Leave blank to have one automatically chosen or specify a /14 block in 10.0.0.0/8.

Returned: success

conditions

complex

Which conditions caused the current cluster state.

Returned: success

code

string

Machine-friendly representation of the condition.

Returned: success

message

string

Human-friendly representation of the condition.

Returned: success

createTime

string

The time the cluster was created, in RFC3339 text format.

Returned: success

currentMasterVersion

string

The current software version of the master endpoint.

Returned: success

currentNodeCount

integer

The number of nodes currently in the cluster.

Returned: success

currentNodeVersion

string

The current version of the node software components. If they are currently at multiple versions because they’re in the process of being upgraded, this reflects the minimum version of all nodes.

Returned: success

databaseEncryption

complex

Configuration of etcd encryption.

Returned: success

keyName

string

Name of CloudKMS key to use for the encryption of secrets in etcd. Ex.

`projects/my-project/locations/global/keyRings/my-ring/cryptoKeys/my-key` .

Returned: success

state

string

Denotes the state of etcd encryption.

Returned: success

defaultMaxPodsConstraint

complex

The default constraint on the maximum number of pods that can be run simultaneously on a node in the node pool of this cluster.

Only honored if cluster created with IP Alias support.

Returned: success

maxPodsPerNode

string

Constraint enforced on the max num of pods per node.

Returned: success

description

string

An optional description of this cluster.

Returned: success

enableKubernetesAlpha

boolean

Kubernetes alpha features are enabled on this cluster. This includes alpha API groups (e.g. v1alpha1) and features that may not be production ready in the kubernetes version of the master and nodes.

Returned: success

enableTpu

boolean

(Optional) Whether to enable Cloud TPU resources in this cluster.

See the official documentation - https://cloud.google.com/tpu/docs/kubernetes-engine-setup .

Returned: success

endpoint

string

The IP address of this cluster’s master endpoint.

The endpoint can be accessed from the internet at https://username:password@endpoint/ See the masterAuth property of this resource for username and password information.

Returned: success

expireTime

string

The time the cluster will be automatically deleted in RFC3339 text format.

Returned: success

initialClusterVersion

string

The software version of the master endpoint and kubelets used in the cluster when it was first created. The version can be upgraded over time.

Returned: success

initialNodeCount

integer

The number of nodes to create in this cluster. You must ensure that your Compute Engine resource quota is sufficient for this number of instances. You must also have available firewall and routes quota. For requests, this field should only be used in lieu of a “nodePool” object, since this configuration (along with the “nodeConfig”) will be used to create a “NodePool” object with an auto-generated name. Do not use this and a nodePool at the same time.

This field has been deprecated. Please use nodePool.initial_node_count instead.

Returned: success

ipAllocationPolicy

complex

Configuration for controlling how IPs are allocated in the cluster.

Returned: success

clusterIpv4CidrBlock

string

The IP address range for the cluster pod IPs. If this field is set, then cluster.cluster_ipv4_cidr must be left blank.

This field is only applicable when useIpAliases is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

Returned: success

clusterSecondaryRangeName

string

The name of the secondary range to be used for the cluster CIDR block. The secondary range will be used for pod IP addresses.

This must be an existing secondary range associated with the cluster subnetwork .

Returned: success

createSubnetwork

boolean

Whether a new subnetwork will be created automatically for the cluster.

Returned: success

nodeIpv4CidrBlock

string

The IP address range of the instance IPs in this cluster.

This is applicable only if createSubnetwork is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

Returned: success

servicesIpv4CidrBlock

string

The IP address range of the services IPs in this cluster. If blank, a range will be automatically chosen with the default size.

This field is only applicable when useIpAliases is true.

Set to blank to have a range chosen with the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

Returned: success

servicesSecondaryRangeName

string

The name of the secondary range to be used as for the services CIDR block. The secondary range will be used for service ClusterIPs. This must be an existing secondary range associated with the cluster subnetwork.

Returned: success

stackType

string

The IP stack type of the cluster, possible values: (STACK_TYPE_UNSPECIFIED, IPV4, IPV4_IPV6)

Returned: success

subnetworkName

string

A custom subnetwork name to be used if createSubnetwork is true.

If this field is empty, then an automatic name will be chosen for the new subnetwork.

Returned: success

tpuIpv4CidrBlock

string

The IP address range of the Cloud TPUs in this cluster. If unspecified, a range will be automatically chosen with the default size.

This field is only applicable when useIpAliases is true.

If unspecified, the range will use the default size.

Set to /netmask (e.g. /14) to have a range chosen with a specific netmask.

Returned: success

useIpAliases

boolean

Whether alias IPs will be used for pod IPs in the cluster.

Returned: success

kubectlContext

string

The name of the context for the kubectl config file. Will default to the cluster name.

Returned: success

kubectlPath

string

The path that the kubectl config file will be written to.

The file will not be created if this path is unset.

Any existing file at this path will be completely overwritten.

This requires the PyYaml library.

Returned: success

labelFingerprint

string

The fingerprint of the set of labels for this cluster.

Returned: success

legacyAbac

complex

Configuration for the legacy ABAC authorization mode.

Returned: success

enabled

boolean

Whether the ABAC authorizer is enabled for this cluster. When enabled, identities in the system, including service accounts, nodes, and controllers, will have statically granted permissions beyond those provided by the RBAC configuration or IAM.

Returned: success

location

string

The location where the cluster is deployed.

Returned: success

locations

list / elements=string

The list of Google Compute Engine zones in which the cluster’s nodes should be located.

Returned: success

loggingService

string

The logging service the cluster should use to write logs. Currently available options: logging.googleapis.com - the Google Cloud Logging service.

none - no logs will be exported from the cluster.

if left as an empty string,logging.googleapis.com will be used.

Returned: success

masterAuth

complex

The authentication information for accessing the master endpoint.

Returned: success

clientCertificate

string

Base64-encoded public certificate used by clients to authenticate to the cluster endpoint.

Returned: success

clientCertificateConfig

complex

Configuration for client certificate authentication on the cluster. For clusters before v1.12, if no configuration is specified, a client certificate is issued.

Returned: success

issueClientCertificate

boolean

Issue a client certificate.

Returned: success

clientKey

string

Base64-encoded private key used by clients to authenticate to the cluster endpoint.

Returned: success

clusterCaCertificate

string

Base64-encoded public certificate that is the root of trust for the cluster.

Returned: success

password

string

The password to use for HTTP basic authentication to the master endpoint. Because the master endpoint is open to the Internet, you should create a strong password with a minimum of 16 characters. (unsupported with GKE >= 1.19).

Returned: success

username

string

The username to use for HTTP basic authentication to the master endpoint. (unsupported with GKE >= 1.19).

Returned: success

masterAuthorizedNetworksConfig

complex

Configuration for controlling how IPs are allocated in the cluster.

Returned: success

cidrBlocks

complex

Define up to 50 external networks that could access Kubernetes master through HTTPS.

Returned: success

cidrBlock

string

Block specified in CIDR notation.

Returned: success

displayName

string

Optional field used to identify cidr blocks.

Returned: success

enabled

boolean

Whether or not master authorized networks is enabled.

Returned: success

monitoringService

string

The monitoring service the cluster should use to write metrics.

Currently available options: monitoring.googleapis.com - the Google Cloud Monitoring service.

none - no metrics will be exported from the cluster.

if left as an empty string, monitoring.googleapis.com will be used.

Returned: success

name

string

The name of this cluster. The name must be unique within this project and location, and can be up to 40 characters. Must be Lowercase letters, numbers, and hyphens only. Must start with a letter. Must end with a number or a letter.

Returned: success

network

string

The name of the Google Compute Engine network to which the cluster is connected. If left unspecified, the default network will be used.

Returned: success

networkConfig

complex

Network configurations .

Returned: success

defaultSnatStatus

boolean

Whether the cluster disables default in-node sNAT rules. In-node sNAT rules will be disabled when defaultSnatStatus is disabled.

Returned: success

enableIntraNodeVisibility

boolean

Whether Intra-node visibility is enabled for this cluster. This makes same node pod to pod traffic visible for VPC network.

Returned: success

network

string

The relative name of the Google Compute Engine network to which the cluster is connected.

Example: projects/my-project/global/networks/my-network .

Returned: success

subnetwork

string

The relative name of the Google Compute Engine subnetwork to which the cluster is connected.

Example: projects/my-project/regions/us-central1/subnetworks/my-subnet .

Returned: success

networkPolicy

complex

Configuration options for the NetworkPolicy feature.

Returned: success

enabled

boolean

Whether network policy is enabled on the cluster.

Returned: success

provider

string

The selected network policy provider.

Returned: success

nodeConfig

complex

Parameters used in creating the cluster’s nodes.

For requests, this field should only be used in lieu of a “nodePool” object, since this configuration (along with the “initialNodeCount”) will be used to create a “NodePool” object with an auto-generated name. Do not use this and a nodePool at the same time. For responses, this field will be populated with the node configuration of the first node pool. If unspecified, the defaults are used.

Returned: success

accelerators

complex

A list of hardware accelerators to be attached to each node. See https://cloud.google.com/compute/docs/gpus for more information about support for GPUs.

Returned: success

acceleratorCount

string

The number of accelerator cards exposed to an instance.

Returned: success

acceleratorType

string

The accelerator type resource name.

Returned: success

diskSizeGb

integer

Size of the disk attached to each node, specified in GB. The smallest allowed disk size is 10GB. If unspecified, the default disk size is 100GB.

Returned: success

diskType

string

Type of the disk attached to each node (e.g. ‘pd-standard’ or ‘pd-ssd’) If unspecified, the default disk type is ‘pd-standard’ .

Returned: success

imageType

string

The image type to use for this node. Note that for a given image type, the latest version of it will be used.

Returned: success

labels

dictionary

The map of Kubernetes labels (key/value pairs) to be applied to each node. These will added in addition to any default label(s) that Kubernetes may apply to the node. In case of conflict in label keys, the applied set may differ depending on the Kubernetes version – it’s best to assume the behavior is undefined and conflicts should be avoided. For more information, including usage and the valid values, see: http://kubernetes.io/v1.1/docs/user-guide/labels.html An object containing a list of “key”: value pairs.

Example: { “name”: “wrench”, “mass”: “1.3kg”, “count”: “3” }.

Returned: success

localSsdCount

integer

The number of local SSD disks to be attached to the node.

The limit for this value is dependant upon the maximum number of disks available on a machine per zone. See: https://cloud.google.com/compute/docs/disks/local-ssd#local_ssd_limits for more information.

Returned: success

machineType

string

The name of a Google Compute Engine machine type (e.g.

n1-standard-1). If unspecified, the default machine type is n1-standard-1.

Returned: success

metadata

dictionary

The metadata key/value pairs assigned to instances in the cluster.

Keys must conform to the regexp [a-zA-Z0-9-_]+ and be less than 128 bytes in length. These are reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project or be one of the four reserved keys: “instance-template”, “kube-env”, “startup-script”, and “user-data” Values are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on them is that each value’s size must be less than or equal to 32 KB.

The total size of all keys and values must be less than 512 KB.

An object containing a list of “key”: value pairs.

Example: { “name”: “wrench”, “mass”: “1.3kg”, “count”: “3” }.

Returned: success

minCpuPlatform

string

Minimum CPU platform to be used by this instance. The instance may be scheduled on the specified or newer CPU platform.

Returned: success

oauthScopes

list / elements=string

The set of Google API scopes to be made available on all of the node VMs under the “default” service account.

The following scopes are recommended, but not required, and by default are not included: https://www.googleapis.com/auth/compute is required for mounting persistent storage on your nodes.

https://www.googleapis.com/auth/devstorage.read_only is required for communicating with gcr.io (the Google Container Registry).

If unspecified, no scopes are added, unless Cloud Logging or Cloud Monitoring are enabled, in which case their required scopes will be added.

Returned: success

preemptible

boolean

Whether the nodes are created as preemptible VM instances. See: https://cloud.google.com/compute/docs/instances/preemptible for more information about preemptible VM instances.

Returned: success

serviceAccount

string

The Google Cloud Platform Service Account to be used by the node VMs. If no Service Account is specified, the “default” service account is used.

Returned: success

shieldedInstanceConfig

complex

Shielded Instance options.

Returned: success

enableIntegrityMonitoring

boolean

Defines whether the instance has integrity monitoring enabled.

Enables monitoring and attestation of the boot integrity of the instance.

The attestation is performed against the integrity policy baseline. This baseline is initially derived from the implicitly trusted boot image when the instance is created.

Returned: success

enableSecureBoot

boolean

Defines whether the instance has Secure Boot enabled.

Secure Boot helps ensure that the system only runs authentic software by verifying the digital signature of all boot components, and halting the boot process if signature verification fails.

Returned: success

tags

list / elements=string

The list of instance tags applied to all nodes. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during cluster or node pool creation. Each tag within the list must comply with RFC1035.

Returned: success

taints

complex

List of kubernetes taints to be applied to each node.

For more information, including usage and the valid values, see: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/ .

Returned: success

effect

string

Effect for taint.

Returned: success

key

string

Key for taint.

Returned: success

value

string

Value for taint.

Returned: success

nodeIpv4CidrSize

integer

The size of the address space on each node for hosting containers.

This is provisioned from within the container_ipv4_cidr range.

Returned: success

nodePools

complex

Node pools belonging to this cluster.

Returned: success

name

string

Name of the node pool.

Returned: success

privateClusterConfig

complex

Configuration for a private cluster.

Returned: success

enablePrivateEndpoint

boolean

Whether the master’s internal IP address is used as the cluster endpoint.

Returned: success

enablePrivateNodes

boolean

Whether nodes have internal IP addresses only. If enabled, all nodes are given only RFC 1918 private addresses and communicate with the master via private networking.

Returned: success

masterIpv4CidrBlock

string

The IP range in CIDR notation to use for the hosted master network. This range will be used for assigning internal IP addresses to the master or set of masters, as well as the ILB VIP. This range must not overlap with any other ranges in use within the cluster’s network.

Returned: success

privateEndpoint

string

The internal IP address of this cluster’s master endpoint.

Returned: success

publicEndpoint

string

The external IP address of this cluster’s master endpoint.

Returned: success

releaseChannel

complex

ReleaseChannel indicates which release channel a cluster is subscribed to.

Release channels are arranged in order of risk and frequency of updates.

Returned: success

channel

string

Which release channel the cluster is subscribed to.

Returned: success

resourceLabels

dictionary

The resource labels for the cluster to use to annotate any related Google Compute Engine resources.

Returned: success

servicesIpv4Cidr

string

The IP address range of the Kubernetes services in this cluster, in CIDR notation (e.g. 1.2.3.4/29). Service addresses are typically put in the last /16 from the container CIDR.

Returned: success

shieldedNodes

complex

Shielded Nodes configuration.

Returned: success

enabled

boolean

Whether Shielded Nodes features are enabled on all nodes in this cluster.

Returned: success

status

string

The current status of this cluster.

Returned: success

statusMessage

string

Additional information about the current status of this cluster, if available.

Returned: success

subnetwork

string

The name of the Google Compute Engine subnetwork to which the cluster is connected.

Returned: success

tpuIpv4CidrBlock

string

The IP address range of the Cloud TPUs in this cluster, in [CIDR](http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing) notation (e.g. `1.2.3.4/29`).

Returned: success

Authors

  • Google Inc. (@googlecloudplatform)